Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 79 for “"Static Random Access Memory"”.

  1. High Performance Static Random Access Memory Design for Emerging Applications

    Memory wall is becoming a more and more serious bottleneck of the processing speed of microprocessors. The mismatch between CPUs and memories has been increasing since three decades ago. SRAM was introduced as the bridge between the main memory and the CPU. SRAM is designed to be on the same die …

    ndsu Repository record for High Performance Static Random Access Memory Design for Emerging Applications (opens in a new tab)

  2. Variability-Aware Design of Static Random Access Memory Bit-Cell

    … circuit designs necessitates a large embedded memory for data manipulation and storage. The most often used embedded memory is the Static Random Access Memory (SRAM), with a six transistor memory bit-cell. Currently, memories occupy more than 50% of the chip area and this percentage is only …

    waterloo Repository record for Variability-Aware Design of Static Random Access Memory Bit-Cell (opens in a new tab)

  3. Novel Non Precharging Single Bitline 8T Static Random Access Memory

    … for 45nm technology. We have also analyzed the static noise margin (SNM) and the stability of the proposed design. In this analysis, we have used three methods. First, the traditional SNM method with the butterfly curve is introduced. Second, the N-curve method is used. And finally, we used the …

    umkc Repository record for Novel Non Precharging Single Bitline 8T Static Random Access Memory (opens in a new tab)

  4. Radiation and annealing effects on commercial complementary metal-oxide-semiconductor static random access memory

    … In this dissertation, commercial non-volatile static random access memory (SRAM) parts have been irradiated and tested to quantify the effect of ionizing dose. The parts were irradiated using Cesium-137 and the irradiated devices were tested for functional failures. The pre-irradiation data …

    ttu Repository record for Radiation and annealing effects on commercial complementary metal-oxide-semiconductor static random access memory (opens in a new tab)

  5. Static random-access memory designs based on different FinFET at lower technology node (7nm)

    The Static Random-Access Memory (SRAM) has a significant performance impact on current nanoelectronics systems. To improve SRAM efficiency, it is important to utilize emerging technologies to overcome short-channel effects (SCE) of conventional CMOS. FinFET devices are promising emerging devices …

    umkc Repository record for Static random-access memory designs based on different FinFET at lower technology node (7nm) (opens in a new tab)

  6. Exploiting Application Behaviors for Resilient Static Random Access Memory Arrays in the Near-Threshold Computing Regime

    … imperfections and the operating environment. Static Random Access Memory (SRAM) arrays are the most affected components of a microprocessor, and consequently require robust design techniques. This thesis proposes a technique that exploits the software use of SRAM arrays in order to reduce …

    utahstate Repository record for Exploiting Application Behaviors for Resilient Static Random Access Memory Arrays in the Near-Threshold Computing Regime (opens in a new tab)

  7. Central processing unit built-in self-test and enhanced statistical defect analysis compression for static random access memory

    … signal processors (DSPs) occupied by embedded static random access memory (SRAM) has increased drastically over the years. As a result, static memory has become a prime contributor to the overall failure rate of DSP devices. Central Processing Unit Built hi Self Test (CPUbist) was thus …

    ttu Repository record for Central processing unit built-in self-test and enhanced statistical defect analysis compression for static random access memory (opens in a new tab)

  8. Fabrication of Carbon Nanotube Field Effect Transistor Using Dielectrophoresis and Its Application as Static Random Access Memory Bit Cell

    … communication” between microprocessor and memory to increase the computation for applications like AI, IoT etc and 3D monolithic memories. As a solution, we propose a novel CNFET based processing in-memory architecture using a novel CNFET dual port single-ended SRAM bit cell. The …

    ottawa-retro Repository record for Fabrication of Carbon Nanotube Field Effect Transistor Using Dielectrophoresis and Its Application as Static Random Access Memory Bit Cell (opens in a new tab)

  9. Implementation of error detection and correction (EDAC) in the Static Random Access Memory (SRAM) aboard Petite Amateur Navy Satellite (PANSAT) [electronic resource]

    … errors detected are automatically corrected in memory during the same bus cycle in which they are detected. The EDAC circuit computes the check bits based upon a 16-bit data word. Byte write capability is provided by using a "read-modify-write" method. The system was built on a wire wrap …

    nps Repository record for Implementation of error detection and correction (EDAC) in the Static Random Access Memory (SRAM) aboard Petite Amateur Navy Satellite (PANSAT) [electronic resource] (opens in a new tab)

  10. A Comparative Analysis of 6T and 10T SRAM Cells for Sub-threshold Operation in 65 nm CMOS Technology

    … most affected by this revolution is computer memory. In this thesis, a 10-Transistor Static Random Access Memory is compared to a 6-Transistor Static Random Access Memory in the subthreshold region of operation for a 65nm technology node. This comparison focuses primarily on the stability of …

    waterloo Repository record for A Comparative Analysis of 6T and 10T SRAM Cells for Sub-threshold Operation in 65 nm CMOS Technology (opens in a new tab)

  11. Central processing unit built-in self-test for random access memory test and repair

    … percentage of the die area to embedded static random access memory, and by designing redundant elements into the memory, repairs to the memory as an effective way to increase digital signal processor functional yields. A time and resource efficient test has been developed to find the …

    ttu Repository record for Central processing unit built-in self-test for random access memory test and repair (opens in a new tab)

  12. Optimizing cycle time through SRAM repairs

    … that using large microprocessors with embedded static random access memory (SRAM) yield model results can filter devices that are predicted to fail at the final test due to the number of SRAM repairs. This model will help reduce cycle time.

    ttu Repository record for Optimizing cycle time through SRAM repairs (opens in a new tab)

  13. Design of a universal test platform for radiation testing of digital components

    … board will be used to test two custom static random access memory (SRAM) chips, as well as other custom chips designed at the Naval Postgraduate School. Components for the test hardware were selected to allow prototyping with standard parts that can later be replaced with radiation …

    nps Repository record for Design of a universal test platform for radiation testing of digital components (opens in a new tab)

  14. AI-BASED SRAM FINGERPRINTING AND ATTESTATION FOR ENHANCING TRUST IN IOT NETWORKS

    … these devices. This thesis focuses on using the Static Random Access Memory (SRAM) for Machine Learning (ML)-based fingerprinting and attestation of IoT MCUs, aiming to address the limitations of prior work and achieve high predictive performance with lightweight ML models. Further, the proposed …

    nus Repository record for AI-BASED SRAM FINGERPRINTING AND ATTESTATION FOR ENHANCING TRUST IN IOT NETWORKS (opens in a new tab) Download file for AI-BASED SRAM FINGERPRINTING AND ATTESTATION FOR ENHANCING TRUST IN IOT NETWORKS (opens in a new tab)

  15. Yield-reliability modeling: Application to large processors

    … was performed on a large processor with embedded static random access memory (SRAM) with built-in redundancy, manufactured using modern very large scale integration (VLSI) technologies. This experiment will serve to prove the hypothesis that redundant SRAM on a large processor can be used for …

    ttu Repository record for Yield-reliability modeling: Application to large processors (opens in a new tab)

  16. Self-Healing Cellular Automata to Correct Soft Errors in Defective Embedded Program Memories

    Static Random Access Memory (SRAM) cells in ultra-low power Integrated Circuits (ICs) based on nanoscale Complementary Metal Oxide Semiconductor (CMOS) devices are likely to be the most vulnerable to large-scale soft errors. Conventional error correction circuits may not be able to handle the …

    utahstate Repository record for Self-Healing Cellular Automata to Correct Soft Errors in Defective Embedded Program Memories (opens in a new tab)

  17. Statistical Performance Modeling of SRAMs

    Yield analysis is a critical step in memory designs considering a variety of performance constraints. Traditional circuit level Monte-Carlo simulations for yield estimation of Static Random Access Memory (SRAM) cell is quite time consuming due to their characteristic of low failure rate, while …

    tamu Repository record for Statistical Performance Modeling of SRAMs (opens in a new tab)

  18. CMOS SRAM design for initializing programmable logic devices

    <p>This thesis presents the design of CMOS Static Random Access Memory (SRAM) which is imbedded within a high performance Programmable Logic Device (PLD). The SRAM and its control circuitry are used to initialize (or personalize) the NJIT PLD chip. The design is defined in 3-levels of functional …

    njit Repository record for CMOS SRAM design for initializing programmable logic devices (opens in a new tab)

Page 1 of 4