Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 39 for “"Static Synchronous Compensator (Statcom)"”.
-
Damping improvement of power system using shunt static synchronous compensator STATCOM
… the damping of power systems by using shunt static synchronous compensators (STATCOM). The study aims to achieve this by implementing a control strategy using STATCOM.
-
StatCom/BESS using a diode-clamped multilevel inverter
… into a diode-clamped multilevel inverter based Static Synchronous Compensator (StatCom). The main contribution of the work with this dissertation is the practical application of multilevel inverter in StatCom/BESS and the development of the battery reduced structure for the …
-
Steady State Voltage Stability Enhancement Using Shunt and Series FACTS Devices
… To achieve this, FACTS devices such as Static VAR Compensator (SVC), Static Synchronous Compensator (STATCOM), and Thyristor Controlled Series Capacitor (TCSC) are used in the test system as three separate test cases. The results obtained assist in drawing conclusions on the …
-
Energy and voltage management methods for multilevel converters for bulk power system power quality improvement
… loading on the bulk power system. Typically, a static VAR compensator (SVC) or Static Synchronous compensator (STATCOM) are use to provide the reactive power support in order to alleviate the fluctuations in voltage at PCC. Static Synchronous Compensators (STATCOMs) provide a power …
-
Modeling and Simulation of Parallel D-STATCOMs with Full-Wave Rectifiers
… One type of shunt FACTS controller is the Static Synchronous Compensator (STATCOM), which uses fully controllable switches to source or sink reactive power to a point on the grid, thus reducing voltage fluctuations due to load changes. The purpose of this thesis is to model and simulate the …
-
Energy Storage Equipped STATCOM for Power Quality Improvements in Distribution Grids. Impact of Load Dynamics on System Performance.
… source converter (VSC), also known as the static synchronous compensator (STATCOM). This thesis deals with the control, performance and applications of STATCOMs equipped with energy storage for power quality improvements. The additional power quality applications, made possible by the …
-
A comparison between STATCOMs using PWM voltage control and hysteresis current control (HCC)
… Among the various applications of a VSI, the Static Synchronous Compensator (STATCOM) is the most popular one. It injects a set of three-phase balanced sinusoidal currents with controllable magnitude and phase angle, into the transmission line to regulate the transmission line voltage or to …
-
Dynamic Study of Inverter-based Resources in Weak Grids
… to control the reactive power bank, such as static var compensator (SVC) and static synchronous compensator (STATCOM). Low-frequency oscillations are also observed in the FACT systems. Therefore, the oscillations and stability analysis of SVC are presented as an additional dynamic study …
-
Impacts of high penetration of DFIG wind turbines on rotor angle stability of power systems
… the system stability. DFIG-GSC is utilised as a static synchronous compensator (STATCOM) to provide reactive power support during the active crowbar time when controlling of both reactive and active power is lost and a large amount of reactive power is absorbed. In addition, a supplementary power …
-
Integration of battery energy storage with flexible AC transmission system devices
… incorporation of battery energy storage into a Static Synchronous Compensator (StatCom). The main contribution of this body of work is the establishment of the modeling and control of the StatCom/BESS in power system dynamic applications. The first paper is focused on the steady state …
-
Phase domain modelling and simulation of large-scale power systems with VSC-based FACTS equipment
… analytical development in this research are: the static synchronous compensator (STATCOM), the static synchronous series compensator (SSSC), the unified power flow controller (UPFC) and the high-voltage direct current (HVDC). These power electronics-based controllers have the voltage source …
-
Facilitating seamless transitions in flexible microgrids: A unified control systems framework for enabling multi-mode inverters
… grid-forming (GFM), grid-following (GFL), static synchronous compensator (STATCOM), energy storage system (ESS), and voltage source inverter (VSI). This is achieved by proposing a control architecture that is common to all operating modes. The proposed architecture is then equipped with a …
-
Adaptive Control for Power System Voltage and Frequency Regulation
… regulation is studied in this work.</p> <p>Static Synchronous Compensator (STATCOM) can provide fast and efficient reactive power support to regulate system voltage. In the literature, various STATCOM control methods have been discussed, including many applications of proportional–integral …
-
Dynamic phasor modelling of VSC FACTS devices for small signal stability studies
… systems (VSC-FACTS) systems is presented using synchronous dq and dq-dynamic phasor approach.;Two types of the VSC-FACTS devices are studied in this thesis; the static synchronous compensator (STATCOM) due to its popularity in the power system network and static synchronous series compensator …
-
Modeling, analysis, control and design application guidelines of doubly fed induction generator (DFIG) for wind power applications
… have been discussed in detail in both sub-synchronous and super-synchronous mode of operation. An improved vector control strategy based on the rotor flux oriented vector control has been proposed to control the active power output of the DFIG. The new vector control strategy is compared …
-
Dynamic State Estimation Based Protection of Power Electronics Systems
… processed by the state estimation algorithm. A static synchronous compensator (STATCOM) is used for the simulation of the fault and the validation of the EBP. The fault events are simulated in the time domain and the EBP is set up based on the quasi-dynamic domain converter system models. Four …
-
Control of a Modular Multilevel Flying Capacitor Based STATCOM for Distribution Systems
… reactive power into the network using a Static Synchronous Compensator (STATCOM). This can be used both for regulating the voltage and reducing the losses. A STATCOM is critically dependent on a grid synchronisation scheme that can accurately track the changes occurring in the grid phase …
-
Stability and Interaction Analysis of Inverter-Based Resources in Power Grids
… power (VAR) compensation is an effective method. Synchronous condenser (SynCon) and static synchronous compensator (STATCOM) are widely used among VAR devices. They have the capability of increasing the transmission system stability and efficiency by absorbing or generating reactive power. A …
-
Model Predictive Control Techniques with Application to Photovoltaic, DC Microgrid, and a Multi-Sourced Hybrid Energy System
… inverter, MPC of a capacitor-less VAR compensator based on matrix converter (MC). This dissertation firstly investigates a multi-objective optimization technique for a hybrid distribution system. The variability of a high-penetration PV scenario is also studied when incorporated into …
-
Evaluations of Simulation Models for Flicker and Harmonics
… of common coupling (PCC). To mitigate this, a Static Synchronous Compensator (STATCOM) is connected in parallel to dampen the current variations and therefore the power quality disturbances. To size the STATCOM well, preliminary studies with accurate EAF and STATCOM models are vital. This …
Page 1 of 2