Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Static pushover analysis"”.
-
Seismic Performance of concrete buildings reinforced with superelastic shape memory alloy rebars
… high seismic zone of Western Canada. Nonlinear static pushover analysis and incremental dynamic analysis, (IDA) considering 20 earthquake records were performed to determine the best distribution of SMA rebars and investigate the seismic performance factors (SPFs). The best distribution of SMA …
-
A Method for Conducting Push-over Tsunami Analysis in Accordance with ASCE 7-16
… also allowing for alternative performance-based analysis. Research into performance-based non-linear analysis for tsunami loading has been conducted by Baiguera, et al. (2020) using the software OpenSees, however this software is primarily used in academia and is not particularly prevalent in the …
-
Seismic fragility of buildings damaged by past earthquakes
Fragility analysis plays an important role in seismic risk assessment. Current fragility models of buildings are mostly focusing on the as-built condition of the structure while ignoring the possibility of having multiple earthquakes during the service life of the structure. However, considering …
-
Predicted Inelastic Response of Conventional and Ductile Steel Concentrically Braced Frame Buildings Under Wind Loads
… of nine unique braced frame designs. Nonlinear static pushover analysis was used to determine system overstrength and ductility under wind loads. Eigenvalue vibration analysis was used to determine the building periods of vibration and their mode shapes. Nonlinear dynamic dynamic response …
-
Seismic Rehabilitation of Steel Moment Frames Vulnerable to Soft-Story Failures Through Implementation of Rocking Cores
… force to the system. In addition, nonlinear static pushover analyses are performed to address the beneficial contribution of the RC to the system under the performance objectives including immediate occupancy, life safety, and collapse prevention. The Monte-Carlo simulation technique is used …
-
Performance-based seismic design and evaluation of steel eccentrically braced frames with tubular links as bridge bents
… have also been provided. The response spectrum analysis coupled with inelastic static pushover analysis is used for global displacement demands and for demonstrating local component performance compliance of shear links. Nonlinear time-history analysis is also used to check and provide a …
-
Seismic performance evaluation of multi column bridge bent retrofitted with different alternatives
… obtained from nonlinear Incremental Dynamic Analysis (IDA) and static pushover analysis. Statistical comparisons of static (pushover) against dynamic analyses results have been performed in terms of performance criteria such as displacement and base shear at cracking, yielding and crushing. …
-
Evaluation of the effects of nonlinear soil-structure interaction on the inelastic seismic response of pile-supported bridge piers
… interface were all accounted for. The numerical analysis method was carefully validated by verifying the modeling of each component of the system and by verifying the modeling of the system as a whole through analyzing an instrumented bridge pier subjected to an actual earthquake. The dynamic …
-
Seismic Response of a Highway Bridge with Structural Fuses for Seismic Protection of Piers
… at the abutments.Two different types of analysis were applied to the model: (1) static pushover analysis to determine the elastic capacity and the nonlinear behavior of bridge components such as columns, piles, and abutments in both the longitudinal and transverse directions, and (2) …
-
Influence of the Gravity System on the Seismic Performance of Special Steel Moment Frames
… important effect but should be included in the analysis. The second part of the investigation looks more in depth at the role of the gravity columns on the collapse performance of SMFs. Using the 2-, 4- and 8-story SMFs, the gravity columns are incorporated using the approach where all the …
-
Multi-Hazard Analysis of Bridges Under Seismic, Flood-Induced Scour, and Hydrodynamic Loading
… research develops a comprehensive multi-hazard analysis framework to evaluate bridge performance under combined seismic and flood-induced hazards. Three-dimensional finite element (FE) models of representative three- and six-span steel girder bridges are developed and analyzed under varying …
-
Strength and Ductility of Rod-Braced Diaphragms in Metal Building Systems Subjected to Earthquake Ground Motions
… collapse safety of the building. Nonlinear static pushover analysis was used to determine the diaphragm design force reduction factor (����s), and incremental nonlinear dynamic response history analyses were used to determine the conditional probability of collapse. The simulations indicated …
-
Linear and nonlinear flexural stiffness models for concrete walls in high-rise buildings
… usually determined using linear elastic dynamic analysis. To carry out this analysis, designers need to assume a linear flexural stiffness of the wall sections that account for cracking. The commentary to the 1994 Canadian concrete code (CPCA 1995) suggests a stiffness value of 70% of the gross …
-
Μεταπλαστική απόκριση και κατάρρευση συστημάτων πλαισίου - θεμελιώσεως, και σεισμική μόνωση μέσω λικνισμού
… presents a simplified constitutive model for analysis of the cyclic response of shallow foundations. The model is based on a simple kinematic hardening constitutive model with Von Mises failure criterion modified accordingly so as to be applicable for sand. The model is validated against …
-
Estimation of Seismic response of buildings and the effect of different scaling methods for ground motion
… determined using the dynamic time history analysis. A set of buildings with steel moment resisting frames of 5, 10, 15, 20 stories in height and located in Vancouver area of Canada have been considered in this study. An extensive review has been conducted to determine the existing methods …
-
Estimation of the seismic response of buildings and the effect of different scaling methods for ground motion
… determined using the dynamic time history analysis. A set of buildings with steel moment resisting frames of 5, 10, 15, 20 stories in height and located in Vancouver area of Canada have been considered in this study. An extensive review has been conducted to determine the existing methods …
-
Collapse Assessment of Steel Plate Shear Walls
… stiffened and composite SPSWs, nonlinear static pushover analysis and incremental dynamic analysis (IDA) have been performed on all archetypes using OpenSees following the procedure presented in FEMA P695. Quantification of seismic parameters of stiffened and composite SPSWs, including …
-
Seismic performance of reinforced concrete frames.
… infilled frame specimens subjected to quasi-static cyclic loading. The analytical study included static pushover and non-linear dynamic analyses of the 3-, 5- and 12-storey reinforced concrete frames. From the overall performance of gravity-load-designed bare reinforced concrete frames …
-
Seismic analysis of low-rise masonry structures with openings in China
… positions under simulated seismic loading (both static and dynamic). This work identifies the impact of openings on both the in-plane and out-of-plane behaviours of URM walls and a quick assessment procedure for the seismic capacity of URM structures <br/>based on opening situations is proposed. …
-
Effect of Viscous Fluid Dampers on Steel Moment Frame Designed for Strength and Hybrid Steel Moment Frame Design
… terms of dynamic stability. Incremental Dynamic Analysis (IDA) was implemented to investigate the benefits of the dampers on the structural behavior. Using ten different earthquakes scaled up to a maximum target multiplier two, with ten increments, damage measures such as interstory drift, …
Page 1 of 2