Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 103 for “"Static testing"”.
-
Quasi-static testing of cantilever masonry shear wall segments
… masonry shear walls, and were tested under quasi-static in-plane reversed cyclic loads. The specimens exhibited predominantly flexural behavior, as expected. Specimens exhibited high displacement ductility (5.6 to 16.7), as expected for flexure-dominated specimens. Specimens constructed with …
-
Development of a microprocessor-based instrument for static testing small rocket engines.
… instrument was developed for static testing solid-fuel rocket engines having peak thrusts of 130 Newtons or less and total impulses of up to 100 Newton-seconds.It measured peak thrust, total impulse, delay time, and maximum casing external temperature, all to relative …
-
Invariants from Tests in Boogie; Combining Dynamic and Static Testing Methods to identify Loop Invariants of Boogie Programs
… and identifying candidate invariants, using static or dynamic testing. This thesis examines how symbolic execution can compensate for the lack of traditional dynamic testing methods in the context of Boogie programs, to identify candidate invariants for such programs using a combination of …
-
The ISO 10328:2006 static testing and finite element analysis of the ICRC prosthetic knee for use in low income countries
… such as two metal plates were manufactured. Static tests were based on the ISO 10328:2006 structural testing of lower-limb prostheses protocol. All static tests were carried out using an Instron ElectroPuls™ E10000 machine. The stress-strain characteristics of the assembly were determined …
-
Experimental investigation of steel-to-timber joints with inclined self-tapping screws: A parametric study evaluating load-displacement behavior and testing configurations in quasi-static testing
Detta examensarbete undersöker användningen av lutande självgängande träskruvar i stål/trä-förband och behandlar deras design samt last-deformationsbeteende genom en experimentell undersökning och en litteraturstudie.Litteraturstudien ger en förståelse för dimensioneringen och beteendet hos …
-
Predicting the performance characteristics of assembled rollover protective structure designs for tractors
… Ford-3000 CROPS prototype successfully completed static testing according to consensus standard SAE J2194. A finite element analysis (FEA) model was developed for the Ford-3000 CROPS prototype based upon SAE J2194 experimental data. The model predicted longitudinal load at energy criterion within …
-
Final modifications of NPS Hummingbird remotely piloted helicopter in preparation for flight
… to make final design modifications and perform static testing to prepare the Hummingbird, a 150 pound, remotely piloted helicopter (RPH), for untethered flight. The major elements involved were: (1) The adaptation of a suitable, permanently-dedicated test stand for use with large-scale RPH/RPV …
-
Study of the effects of pumping pressure on the properties of fresh concrete
… a two-fold objective. One, to develop a suitable testing apparatus in the labaratory to simulate the effect of field pumping of concrete and two, to conduct some preliminary tests to investigate the feasibility of the testing apparatus.</p><p>Pumping of concrete has been practiced in the U.S.A. …
-
Long Term Loading and Additional Material Properties of Vectran Fabric for Inflatable Structure Applications
… structure is composed. This thesis presents both testing methodology and results for a number of key properties using woven fabric constructed of Vectran fibers.;The primary source for test standards was the American Society for Testing and Materials (ASTM). Some alterations were made to standards …
-
A Computational Analysis of Marine Fenders Under Heavy Weather Mooring Conditions
… fenders are modeled as idealized springs, with static- load derived spring constants from manufacturer charts. This has been adequate for previous warships, however with more susceptible warships, a better understanding of the fenders reaction is required. Two series of tests were created, a …
-
Terfenol-D Carbon Fiber Reinforced Polymer (CFRP) Embedded Sensing for Early Damage Detection
… ultimate tensile strength (UTS). For quasi-static testing procedure of specimen 5714 (15 wt.% Terfenol-D embedded CFRP) on a 0-40% loading interval of the material's UTS, there was an observed localized (32 mm2 field of view) magnetic flux gradient of more than 5 mT (4%) with a reversible …
-
Seismic performance of a post-tensioned concrete masonry wall system
… have begun to address this through pseudo-static testing, there remained a clear need to investigate the dynamic performance of such walls. Pseudo-static testing of two partially grouted PCM walls demonstrated the suitability of this system for residential structures in seismic areas. A …
-
The evaluation of a three mode temperature controller by pulse techniques
… Pulse tests provide a quick method of testing the dynamic response of instruments.</p><p>2. A computer should be used for the efficient calculation of results from pulse tests.</p><p>3. Limitations of pulse tests are not yet defined but it appears that an increase in the energy of the …
-
Effects Of Stress Ratios On Polymer Composite Fatigue
… test and material strength by 4 point bending static testing. Four point bending fatigue tests were conducted at different stress ratios (min stress/max stress). S-N curve analysis, stiffness degradation analysis, model fit with desirable fatigue model and image processing has performed. This …
-
Grain wagon fill detection using ultrasonic sensors
… of dusty operating conditions and poor lighting. Static testing was done with the ultrasonic sensor package mounted on the combine harvester unloading auger viewing a wagon load of corn. A feature extraction process was devised which correctly segmented and identified wagon edges from the grain …
-
Automated Mineral Analysis of Mine Waste
… analyzed using MLA. Gastric Pb bioaccessibility testing and total metal content performed on these samples indicated that Pb bioaccessibility in the <250 micron size fraction was not directly correlated with the total Pb concentration. This suggested that there were mineralogical and/or physical …
-
Variable Recruitment in Bundles of Miniature Pneumatic Artificial Muscles and Space Qualified Pneumatic Artificial Muscles
… Additionally, the fabrication and quasi-static testing results for PAMs assembled from candidate space qualified bladder and braided sleeve materials for use in space robotics are assessed.
-
Millennials in the fire service: the effectiveness of fire service recruiting, testing, and retention
… millennials is in question. Stale marketing and static testing processes may be contributing to smaller hiring pools and the inability to reach recruits with the skillsets needed to replace experienced firefighters lost through attrition. Millennials are looking for employment in organizations …
-
Evaluation of stay-in-place PVC-formed concrete walls for blast design
… wall systems are evaluated using laboratory static testing. The results of the loading tree tests for both systems are compared to reinforced concrete wall control samples. PVC-concrete samples exhibited additional strain energy when compared to control samples. Experimental evaluation of the …
-
Tongue and slot joint in composite sandwich panels
… analysis with the object of predicting their static strength for the purpose of including this analysis in future design methods so reducing the experimental requirement. Material static testing was carried out to obtain strength and stiffness to insert in this analysis. The predictions were …
Page 1 of 6