Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 194 for “"Static tests."”.

  1. Evaluation of NP determination by static tests for ARD prediction

    In the prediction of acid rock drainage (ARD), static tests play a very important role. The objective of static prediction tests is to determine the balance between the acid producing potential (AP) and the acid neutralization potential (NP) of waste material. The results of static tests are used …

    ubc Repository record for Evaluation of NP determination by static tests for ARD prediction (opens in a new tab) Download PDF for Evaluation of NP determination by static tests for ARD prediction (opens in a new tab)

  2. Loading Rate Effects on Axial Pile Capacity in Clays

    … efficient and reliable structures, axial load tests are performed on foundation piles. Traditionally, static tests with an average duration of approximately twenty-four hours have been performed on test piles to obtain their axial capacity. These static tests require multiple piles used as …

    byu Repository record for Loading Rate Effects on Axial Pile Capacity in Clays (opens in a new tab) Download PDF for Loading Rate Effects on Axial Pile Capacity in Clays (opens in a new tab)

  3. SEISMIC BEHAVIOUR FACTOR OF VERTICALLY IRREGULAR REINFORCED CONCRETE FRAMES WITH OR WITHOUT INFILL WALLS

    … CARRIED OUT CONSISTS OF THREE PARTS. 1) CYCLIC STATIC TESTS OF SCALED REINFORCED CONCRETE COLUMNS. 2) DESIGN AND ANALYSES OF PROTOTYPE FRAMES. 3) SHAKING TABLE TESTS OF 1/5.5TH - SCALE REINFORCED CONCRETE MODELS. CYCLIC STATIC TESTS OF COLUMNS SHOWED THAT HYSTERETIC BEHAVIOUR OF PROTOTYPE FRAME …

    greece Repository record for SEISMIC BEHAVIOUR FACTOR OF VERTICALLY IRREGULAR REINFORCED CONCRETE FRAMES WITH OR WITHOUT INFILL WALLS (opens in a new tab)

  4. Impact loading of timber beams

    Static tests as well as impact tests were performed to build up our knowledge about impact loading of timber beams. The investigation was focused on failure modes and failure stresses. The static tests were conducted using both deformation and load controlled regimes at three different loading …

    ubc Repository record for Impact loading of timber beams (opens in a new tab) Download PDF for Impact loading of timber beams (opens in a new tab)

  5. Factors affecting the quantity and quality of Argos telemetry locations for wolverines in the northern Cascade Range in Washington

    … and 2011. Moreover, there have been no published tests of the potential effects of animal behavior on Argos system performance. I conducted a series of static and dynamic tests, the latter using a collared dog, to evaluate the potential effects of environmental factors and animal behavior on the …

    washington Repository record for Factors affecting the quantity and quality of Argos telemetry locations for wolverines in the northern Cascade Range in Washington (opens in a new tab)

  6. Impact Response and Failure of a Textile Composite Fuselage Frame

    Impact tests are performed on two circular circumferential frame segments using a drop tower apparatus. These frames have a nominal radius of 120 inches, a forty-eight - degree included angle, a thin-walled cross section in the shape of the letter J, and are typical of the transverse fuselage …

    vt Repository record for Impact Response and Failure of a Textile Composite Fuselage Frame (opens in a new tab)

  7. Comparative assessment of bit geometry and cutting parameters.

    … minimized for the subsequent cut. Two types of tests namely 1) static and 2) rotary cutting experiments were performed. In static tests damage zones underneath the bits were on rock was analyzed and effectiveness of each bit during bit-rock interaction was assessed. The findings of static tests …

    wvu Repository record for Comparative assessment of bit geometry and cutting parameters. (opens in a new tab)

  8. Experiment to Study Earthquake Response of R/c Structures With Stiffness Interruptions

    … Experimental work includes earthquake simulation tests of four small-scale, reinforced concrete structures and static tests of small-scale members and member assemblies which were representative of elements composing the test structures. Analytical work includes evaluation of several simple linear …

    uiuc Repository record for Experiment to Study Earthquake Response of R/c Structures With Stiffness Interruptions (opens in a new tab)

  9. Aerodynamic stability of oscillating bridges

    … in a fluid stream of uniform velocity. From static tests and pressure distribution examinations predictions of vertical and torsional stability trends have been made and approximate aerodynamic constants evaluated. Observations of the change in energy required to maintain uniform oscillations …

    vt Repository record for Aerodynamic stability of oscillating bridges (opens in a new tab)

  10. Time- and Temperature-Dependence of Fracture Energies Attributed to Copper/Epoxy Bonds

    … 90° peel test has been widely employed in quasi-static fracture testing of film adhesion for printed circuit board applications, this test was first used as a basis to which other test results could be compared. A test fixture was designed and built for quasi-static peel testing that accommodated …

    vt Repository record for Time- and Temperature-Dependence of Fracture Energies Attributed to Copper/Epoxy Bonds (opens in a new tab)

  11. The ISO 10328:2006 static testing and finite element analysis of the ICRC prosthetic knee for use in low income countries

    … such as two metal plates were manufactured. Static tests were based on the ISO 10328:2006 structural testing of lower-limb prostheses protocol. All static tests were carried out using an Instron ElectroPuls™ E10000 machine. The stress-strain characteristics of the assembly were determined …

    strathclyde Repository record for The ISO 10328:2006 static testing and finite element analysis of the ICRC prosthetic knee for use in low income countries (opens in a new tab)

  12. Sensor fusion algorithms for kiso sensors and exploring EMG data vs joint angles

    … and noise parameter estimation. Numerous static tests were performed to explore the noise characteristics of the sensors and to estimate the accuracy of the applied SFAs. Using the IMU only and testing on a robotic arm proved to be very accurate giving ±0.5 deg accuracy for roll and pitch. …

    reykjavik Repository record for Sensor fusion algorithms for kiso sensors and exploring EMG data vs joint angles (opens in a new tab)

  13. A Criterion for Dynamic Low-Cycle Shear Fracture

    … statistically determined to be 1.26 for dynamic tests and 1.06 for static tests.

    unm Repository record for A Criterion for Dynamic Low-Cycle Shear Fracture (opens in a new tab)

  14. MECHANICAL CHARACTERIZATION OF MATERIALS AND NANO-DEVICESO F BIOMEDICAL INTEREST THROUGH NANOINDENTATION TEST

    … support and the prosthetic crown. However, static protocols that have been developed for metals or alloys, neglecting the viscous nature of these composites, are currently adopted in a very large body of literature. In this study we (1) investigate how the viscous nature of dental composites …

    poli-torino Repository record for MECHANICAL CHARACTERIZATION OF MATERIALS AND NANO-DEVICESO F BIOMEDICAL INTEREST THROUGH NANOINDENTATION TEST (opens in a new tab)

  15. Determining strength parameters of oil well cement

    … of oil well cement and correlations between static measurements and acoustic measurements. Several static and dynamic tests are compared to determine cement physical properties such as compressive strength, modulus of elasticity and static, dynamic and shear wave velocities. The dynamic …

    texas Repository record for Determining strength parameters of oil well cement (opens in a new tab) Restricted access

  16. Experimental investigation of the response of reinforced concrete structural walls subjected to static and dynamic loading

    … to study the potential discrepancies between static and dynamic wall response, to examine the influence of the web reinforcement ratio on the overall response and modes of failure, and to investigate the sensitivity of shear-dominated wall response to the sequence of earthquake testing. The …

    uiuc Repository record for Experimental investigation of the response of reinforced concrete structural walls subjected to static and dynamic loading (opens in a new tab)

  17. Seismic performance of braced timber frames

    … of the frame. Monotonic tension and cyclic quasi-static tests were conducted on a variety of connections typically used in braced timber frames, utilizing different diameter bolts and high strength glulam rivets with steel side plates. Shake table tests were subsequently conducted on a selected …

    ubc Repository record for Seismic performance of braced timber frames (opens in a new tab) Download PDF for Seismic performance of braced timber frames (opens in a new tab)

  18. Prediction of the static modulus of elasticity in concrete cylinders using resonant tests

    … affordable and fast than traditional destructive tests. Nevertheless, the elastic properties obtained from non-destructive tests (e.g. dynamic tests) differ from traditional tests (e.g. static tests); Mostly because the strain levels used in the dynamic tests are more than three orders of …

    waterloo Repository record for Prediction of the static modulus of elasticity in concrete cylinders using resonant tests (opens in a new tab)

  19. Localization of Autonomous Vehicles Using RFID Phase Shift

    … the Impinj Octane SDK. Testing included both static and mobile experiments. Static tests showed consistent localization out to 40 meters. The Kalman filter successfully removed bad estimates and converged quickly to the true distance. The static tests also confirmed that the algorithm is …

    tamu Repository record for Localization of Autonomous Vehicles Using RFID Phase Shift (opens in a new tab)

  20. Numerical and experimental study of failure of the human proximal femur

    Static and dynamic experiments were conducted to study the failure loads and fracture patterns of human proximal femur bones, that are intact and core drilled. This was done to assist orthopedic surgeons better understand the effects of core drilling into the femoral head to remove osteonecrosis. …

    nps Repository record for Numerical and experimental study of failure of the human proximal femur (opens in a new tab)

Page 1 of 10