Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Stay-in-Place Formwork"”.
-
Seismic performance of high-strength concrete columns in FRP stay-in-place formwork
… concrete (HSC), with strengths reaching 130 MPa, has increased in recent years due to its superior performance and strength. Structures are designed and built utilizing HSC, especially in columns of multi-story buildings. However, the use of high-strength concrete (HSC) in seismically …
-
Numerical Modelling of Reinforced Concrete Walls Encased in Polyvinyl Chloride Stay-In-Place Formwork
In structurally participating formworks, a new forming technique for reinforced concrete, referred to as stay-in-place formwork has recently emerged as a viable technique. This permanent new formwork system simplifies the construction process and reduces construction time. Two materials that are …
-
Use of Carbon Fiber Reinforced Polymer Sheets as Transverse Reinforcement in Bridge Columns
Performance of bridges during previous earthquakes has demonstrated that many structural failures could be attributed to seismic deficiencies in bridge columns. Lack of transverse reinforcement and inadequate splicing of longitudinal reinforcement in potential plastic hinge regions of columns …
-
Σύμμεικτες πλάκες από παραμένοντες τύπους ινοπλεγμάτων σε ανόργανες μήτρες και οπλισμένο σκυρόδεμα: πειραματική διερεύνηση μηχανικής συμπεριφοράς και βέλτιστος σχεδιασμός
The continuous need for the development of new construction methods and materials is highlighted to the Engineers by the raising demands for cost effective and environmental friendly concrete structures fulfilling at the same time high aesthetic design criteria. The application of …
-
Fatigue testing of partial-depth precast concrete bridge deck panels with embedded wire trusses
This thesis covers research into the fatigue behavior of a new precast concrete panel to serve as stay-in-place formwork for the overhang portions of Texas bridge decks. The panel provides structural resistance alongside standard prestressed concrete panels (PCP) to provide formwork across the …
-
The use of high-strength reinforcement in bridge decks
This thesis investigates the performance of high-strength reinforcement in cast-in-place (CIP) bridge decks with precast, prestressed concrete panels (PCPs) as stay-in-place formwork. A total of six deck strip specimens that simulate transverse and longitudinal section details in CIP-PCP bridge …
-
Evaluation of the fatigue behavior of bridge decks with precast panels at expansion joints
In a previous Texas Department of Transportation (TxDOT) research project (0- 4418), a new construction detail was developed for bridge decks at expansion joints. This new detail used precast, prestressed concrete (PC) panels as stay-in-place formwork for a 4-in. thick topping slab. The new detail …
-
Controlling cracking in precast prestressed concrete panels
… concrete panels (PCPs) have been widely used in Texas as stay-in-place formwork in bridge deck construction. Although PCPs are widely popular and extensively used, Texas is experiencing problems with collinear cracks (cracks along the strands) in panels. One reason for the formation of …
-
Monitoring and Analysis of Mn/DOT Precast Composite Slab Span System (PCSSS)
… Precast Composite Slab Span System (PCSSS) was initially designed by Mn/DOT with input from the University of Minnesota (U of MN) researchers and local fabricators. The bridge system consisted of a series of precast prestressed concrete inverted tee bridge elements which also served as …
-
Reducing top mat reinforcement in bridge decks
… precast, prestressed concrete panels (PCPs) as stay-in-place formwork for most bridges built in Texas. The PCPs are placed on the top flanges of adjacent girders and topped with a 4-in. cast-in-place (CIP) slab. This thesis is directed towards identifying and quantifying the serviceability …
-
Influence of precast concrete panel surface condition on behavior of composite bridge decks at skewed expansion joints
Following development of rectangular prestressed, precast concrete panels (PCP) that could be used as stay-in-place formwork adjacent to expansion joints in bridge decks, the Texas Department of Transportation (TxDOT) initiated a research effort to investigate the use of PCP units at skewed …
-
Applications of partial depth precast concrete deck panels on horizontally curved bridges
… commonly used for direct connectors at highway intersections as well as other applications. The majority of curved bridges utilize continuous steel curved I-girder or tub girder systems. One of the most critical construction stages from a stability perspective is placement of the wet concrete …
-
Exploration of 3D printing of concrete for structural health monitoring and accelerated construction
Automation in construction through three-dimensional Printing (3DP) is gaining momentum in civil engineering due to its indomitable advantage over traditional construction approaches, such as reduced costs, improved quality, faster construction, increased sustainability with green concrete, and …
-
Performance of reinforced concrete columns with steel-belted tires as transverse reinforcement
The majority of column failures observed during recent earthquakes were attributed to poor column behaviour caused by lack of inelastic deformability. The deformability of reinforced concrete columns can be improved through the confinement of potential plastic hinge regions by properly designed …
-
Behaviour of PVC Encased Reinforced Concrete Walls under Eccentric Axial Loading
Stay-in-place (SIP) formwork has been used as an alternative to the conventional formwork system. The systems are mainly assembled on site, hence simplifying the construction process and reducing the construction time as the removal procedure has been eliminated. SIP formwork systems can be divided …
-
Flexural Behaviour of Stay-In-Place PVC Encased Reinforced Concrete Walls with Various Panel Types
The use of stay-in-place (SIP) formwork has become an increasingly popular tool for concrete structures, providing advantages in construction scheduling and labour reduction. Stay-in-place formwork made of strong materials such as fibre reinforced polymer (FRP) and steel have proven to supplement …
-
Fatigue Behavior of Concrete Bridge Decks Cast on GFRP Stay-in-Place Structural Forms and Static Performance of GFRP-Reinforced Deck Overhangs
… performance of concrete bridge decks with GFRP stay-in-place structural forms replacing the bottom layer of rebar. The forms were either flat plate with T-up ribs joined using lap splices, or corrugated forms joined through pin-and-eye connections. The decks were supported by simulated Type III …
-
Full-Scale Testing and Numerical Evaluation of Hot-Rolled Asymmetric I-beams in Shallow-Depth Composite Floor Systems
Floor systems are an important part of a building. There are advantages and disadvantages to using certain materials and configurations. However, the floor system depth and the speed of construction are major considerations. Concrete floor systems are relatively slow to construct since they are …
Page 1 of 2