Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 41 for “"Steady State Creep"”.
-
The variation of subgrain misorientation in aluminum with large steady-state creep strain
… boundaries remained constant over the range of steady-state strains examined. However, transmission electron microscopy in this work revealed that subgrain boundaries remained constant over the range of steady-state strains examined. However, transmission electron microscopy in this work …
-
Transient and Steady-state Creep in a SnAgCu Lead-free Solder Alloy: Experiments and Modeling
… the primary (transient) contributions to total creep deformation, assuming that secondary (steady-state) creep strain is dominant and primary creep is negligible. The error associated with this assumption has been difficult to assess because it depends on the properties of the solder joint and …
-
Anisotropic Multi-scale Modeling for Steady-state Creep Behavior of Oligocrystalline SnAgCu (SAC) Solder Joints
… for a continuum-scale compact anisotropic creep model for SAC single crystals, based on Hill’s anisotropic potential and an associated creep flow-rule. The additional contribution from grain boundary sliding, for polycrystalline structures, is investigated by the use of a grain-boundary …
-
Creep properties of Saskatchewan potash
Creep tests have been performed on sets of cylindrical model pillars made from potash ore mined in Saskatchewan. The model pillars have been subjected to constant axial stresses of 5000, 6000, and 7000 psi at constant temperatures in the range 80°F to 110°F for a period of time of 1000 hours. These …
-
Temperature Dependent Mechanical Behavior of Solid Acids
<p>Existing literature data on the creep behavior of superprotonic solid acids, which is important for their use in fuel cell applications, is scant and unreliable. Steady state creep behavior for the model material system cesium hydrogen sulfate (CHS) is probed using nanoindentation and …
-
Torsional creep of tin at high temperatures
Steady-state creep data are presented for tin tested in torsion at temperatures from 1000C to 228°C. Results obtained below 210°C verify observations of other investigators. A creep activation energy of 22.5 Kcal/mol in this temperature range is determined. Above 210°C, an abnormal increase in the …
-
Elevated Temperature Properties Of A Dispersion Strengthened Al [Fe, V, Si] Alloy
… plastic deformation at high temperatures. Creep tests in tension were conducted and the stress dependence n, of the steady state creep rate was obtained. A change in the n value was seen from 16 down to 4 at low stresses and temperatures. The activation energy for creep was calculated from …
-
Deformation of compacts of magnesium hydroxide during dehydroxylation
… the one-third power of the applied stress. The creep deformation of Mg(OH)₂ compacts during dehydroxylation was also studied under isothermal conditions. The overall creep behaviour can be divided into three stages. The initial stage is initiated by the dehydroxylation reaction. During the …
-
Modelling to predict the reliability of solder joints
… review is presented covering analytical methods, creep laws and fatigue laws, and advanced damage mechanics methods. The use of FEA (Finite Element Analysis) to model creep along with a fatigue law to predict lifetime appears to be the most widely used and validated technique at present. The FEA …
-
ROLE OF ETA PHASE EVOLUTION ON CREEP PROPERTIES OF NICKEL BASE SUPERALLOYS USED IN ADVANCED ELECTRIC POWER GENERATION PLANTS
… and it may negatively impact the strength and creep resistance of Nimonic 263. The hypothesis of this project is that eta phase lowers the steady state creep rate of Nimonic 263. The aim of this project was to study the creep performance and deformation behavior of three related materials to …
-
Creep deformation of stoichiometric uranium dioxide single crystals
… from 1340 to 1420°C. The results appear to fit a creep equation of the form (formula omitted) where e = steady-state creep rate (formula omitted) Q = 118 ± 23 kcal/mole C = constant ; and 3 < n <4 in the regions of stress and temperatures examined. Faint slip lines were observed.
-
Simulation of Creep in Micron Scale Crystalline Materials for High Temperature Thermal Protection Systems
… complex interplay of physical phenomena, such as creep and oxidation, that contribute to failure. In order to address this issue, more physics-based failure prediction models need to be developed. One potential way to do this is through the use of dislocation dynamics (DD) models. A DD framework …
-
The creep behaviour of ASTM A437 grade B4B steel for steam turbine applications
… a proprietary steel currently used by HCI.High creep resistance is essential for any candidate so creep-rupture and creep-strain tests were performed at and above the intended service temperature of 538°C. Hardness measurements and transmission electron microscopy were performed on the steel in …
-
Development of a Multi-Scale creep modeling approach
The high-temperature and low-stress creep deformation response of Incoloy 800H is characterized by two consecutive creep strain rate minima. The first minimum creep rate peak is attributed to a solid-solution hardening phenomenon, whereas the second one is associated to the steady-state creep rate …
-
An experimental approach for studying creep behavior of model planar interfaces
An apparatus for measuring the steady state creep behavior of interfaces in aluminum-silicon-aluminum multilayered specimens has been assembled. In the experiment scheme, a double-shear specimen geometry was used to load the interfaces in a state of nominally constant shear. The deformation …
-
ELECTROMECHANICAL INTERACTION ON THE DEFORMATION BEHAVIOR OF METALLIC MATERIALS
… the electric current density. Using the tensile creep technique, the creep deformation of pure tin was studied with the passage of a DC electric current. The steady state creep rate increased with the increase in temperature, tensile stress and electrical current density. For the same tensile …
-
Diffusion in Fe-Mg olivine at elevated temperatures
… stresses <500 bars the experimentally determined steady state creep of the upper mantle rocks dunite and peridotite may be governed by movement of dislocations. It is shown that the rate limiting parameter in the creep-equation is probably the ionic diffusion coefficient in the olivine silicate …
Page 1 of 3