Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"Steam Temperature"”.

  1. Neural Network Based Control of Integrated Recycle Heat Exchanger Superheaters in Circulating Fluidized Bed Boilers

    … superheaters. Heat is transferred to the steam in the intrex superheaters from the circulating ash which can vary in consistency, quantity and quality. Fuel composition can have a large impact on the ash quality and in turn, on intrex performance. Variations in MW load and airflow settings …

    unf Repository record for Neural Network Based Control of Integrated Recycle Heat Exchanger Superheaters in Circulating Fluidized Bed Boilers (opens in a new tab) Download PDF for Neural Network Based Control of Integrated Recycle Heat Exchanger Superheaters in Circulating Fluidized Bed Boilers (opens in a new tab)

  2. Modelling and control of direct steam generation in solar cavity receivers powered by paraboloidal dish concentrators

    The control of steam temperature in direct steam generation plants is challenging due to the complex physical process involved in turning water into steam, and the variable nature of solar radiation. This thesis explores the control of steam temperature at the outlet of a mono-tube cavity receiver …

    anu Repository record for Modelling and control of direct steam generation in solar cavity receivers powered by paraboloidal dish concentrators (opens in a new tab)

  3. Development of a Dynamic Model and Control System for Load-Following Operation of Supercritical Pulverized Coal Power Plants

    … air flow, boiler feedwater flowrate and reheat steam temperature are developed. The control strategy for the main steam temperature control is developed with due consideration of the time delay of the SCPC system

    wvu Repository record for Development of a Dynamic Model and Control System for Load-Following Operation of Supercritical Pulverized Coal Power Plants (opens in a new tab)

  4. Microstructures and Mechanical Behavior of NiAl-Strengthened Ferritic Alloys at Room and Elevated Temperatures

    … gases emission, it is required to increase the steam temperature and pressure in fossil-energy power plants. In the United States, research has been performing in order to push steam temperature to 760 Celsius degree and steam pressure to 35 MPa. However, the highest operational temperature for …

    utk-theses Repository record for Microstructures and Mechanical Behavior of NiAl-Strengthened Ferritic Alloys at Room and Elevated Temperatures (opens in a new tab)

  5. Modeling and control of a supercritical coal fired boiler

    A boiler or a steam generating unit is an integral part of any electric utility plant. It requires a source of heat at a sufficient temperature level to produce steam. The fossil fuels are burnt in the furnace of the boiler for this purpose. The type of steam generating unit considered in this …

    ttu Repository record for Modeling and control of a supercritical coal fired boiler (opens in a new tab)

  6. Spectral anemometry with an electrogasdynamic probe.

    … of the relative humidity of the freestream, steam temperature and steam pressure. Optimum droplet charge was then determined and controlled with corona voltage. A 10 to 15 decibel increase in high frequency response and stable performance resulted.

    nps Repository record for Spectral anemometry with an electrogasdynamic probe. (opens in a new tab)

  7. Experimental and numerical investigation of hydrogen production in a microwave oven

    … applications. Yet, hydrogen production from steam plasma is one of the least researched techniques and lacks experimental and numerical studies. Hence, in this thesis, hydrogen production through steam plasma is experimented in a microwave oven. Moreover, pure steam plasma is numerically …

    uoit Repository record for Experimental and numerical investigation of hydrogen production in a microwave oven (opens in a new tab)

  8. Multi-Stage Electrolysis for Reduction of Electricity Consumption in Hydrogen Production

    … by performing parametric studies of varying steam utilization and inlet steam concentration. Subsequently, a formulation for electrolysis in stages is developed in order to calculate the utilization of each stage, keeping the inlet steam temperature and electrolyte temperature for each stage …

    queens Repository record for Multi-Stage Electrolysis for Reduction of Electricity Consumption in Hydrogen Production (opens in a new tab)

  9. Engineering model of ash deposition and its effect on heat transfer to superheater tubes

    … are input in terms of superheater tube diameter, steam temperature, flue-gas temperature, particle velocity, gas and particle density, gas velocity, multiple time increments, particle diameter distributions, and dust loading with elemental analyses for multiple narrow- range particle-diameter bins …

    utk-theses Repository record for Engineering model of ash deposition and its effect on heat transfer to superheater tubes (opens in a new tab)

  10. The effect of steam conditioning practices on pellet quality and growing broiler nutritional value.

    … nutrient availability, thus cost of production. Steam conditioning represents a manipulable thermo-mechanical processing variable. Corn-soybean meal based diets were conditioned with one of four steam pressure x temperature combinations: 138 kPa at 82.2ºC, 138 kPa at 93.3ºC, 552 kPa at 82.2ºC or …

    wvu Repository record for The effect of steam conditioning practices on pellet quality and growing broiler nutritional value. (opens in a new tab)

  11. Oxidation behaviour of Austenitic stainless steels at high temperature in supercritical plant

    … power plant efficiency is improved by increasing steam temperature and pressure. Current martensitic and ferritic steels do not have the required oxidation and spallation properties for boiler tube applications as service conditions increase. Spallation inside the tube can lead to blockage, …

    birmingham Download PDF for Oxidation behaviour of Austenitic stainless steels at high temperature in supercritical plant (opens in a new tab)

  12. Experimental Evaluation of Surfactant Assisted SAGD Process

    Using a surfactant as a steam additive for improving SAGD performance has been an intriguing idea for several decades. Some positive laboratory and field results on the Surfactant SAGD (S-SAGD) have been mentioned, yet very limited information has been revealed in the public domain literature. The …

    calgary Repository record for Experimental Evaluation of Surfactant Assisted SAGD Process (opens in a new tab)

  13. Design of a fault tolerant control scheme based on sliding mode for Canadian supercritical water reactor

    … performance was maintained and the variation of steam temperature within design limit was guaranteed.

    uoit Repository record for Design of a fault tolerant control scheme based on sliding mode for Canadian supercritical water reactor (opens in a new tab)

  14. Water quench thermal fatigue analysis of grade p22 and grade p91 steels

    … plants and other facilities that utilize high temperature steam flow have been using corrosion-resistant steels with high creep-rupture strengths in their piping systems. Fatigue crack failures have occurred in these piping systems, potentially from the sudden temperature changes from the …

    alabama Repository record for Water quench thermal fatigue analysis of grade p22 and grade p91 steels (opens in a new tab)

  15. Modelling of calibration steam flowmeter test bench

    … for the test bench that serves to calibrate the steam flowmeters by using steam as working fluid. The test bench contains a condenser, the purpose of which is to condense the steam. By maintaining a steady-state regime, the weight of condensate measured during a given period of the time is used …

    ets-quebec Download PDF for Modelling of calibration steam flowmeter test bench (opens in a new tab)

  16. A 10 kilowatt-thermal input multiple effect distillation pilot for concentrated solar power and desalination of seawater plant

    … to the first MED stage, reducing required motive steam pressure. Capture of unused thermal losses from low temperature sources, to heat the TVC inlet motive steam, reduces the required motive steam temperature. The results of a parametric study confirm the Brayton power cycle analysis that the use …

    uiuc Repository record for A 10 kilowatt-thermal input multiple effect distillation pilot for concentrated solar power and desalination of seawater plant (opens in a new tab)

  17. Thermal Modeling of Vacuum Assisted Steam Pasteurization for Improved Product Safety of Low Water Activity Foods

    Vacuum assisted steam pasteurization is a common method used to kill harmful pathogens on low water activity foods (LWAFs). During this treatment process it is generally believed that the steam will quickly penetrate through the small gaps within a package of product and condense on the surfaces …

    vt Repository record for Thermal Modeling of Vacuum Assisted Steam Pasteurization for Improved Product Safety of Low Water Activity Foods (opens in a new tab)

  18. Evaluating Electrification of Fossil Fuel-Fired Boilers for Decarbonization Using Discrete Event Simulation

    … model with realistic data and potential temperature data for a location to estimate boilers' current energy and fuel usage and determine the equivalent electrical boiler capacity and energy usage. The model is based on the first law of thermodynamics and the heat balance of the system. In …

    wvu Repository record for Evaluating Electrification of Fossil Fuel-Fired Boilers for Decarbonization Using Discrete Event Simulation (opens in a new tab)

Page 1 of 3