Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"Steam flow"”.
-
The Effects of Oscillatory Steam Flow on Reflux Condensation Phenomena
<p>The local and global phenomena in oscillatory steam flow reflux condensation were investigated both experimentally and theoretically.</p> <p>A series of experiments were carried out in a 4.86m long vertical double-pipe condenser consisting of a 1.735cm diameter inner tube enclosed within a 5cm …
-
Some Phenomenon Regarding the Resistance of Steam Flow in Different Kinds of Pipe Bends
… light some knowledge regarding the resistance to steam flow in different pipe bends. Four kinds of bends are used in this experiment: the 90° standard elbow, the long radius bend, tube turns, and the corrugated type of bend. In this thesis the author relies altogether on experimental data taken …
-
Experimental validation and design of subsonic ejector for single-phase steam flow in Chinameca geothermal field
… to integrate low-pressure wells into existing steam gathering systems, thereby extending well productivity and minimizing the need for drilling additional wells. Laboratory experiments tested subsonic ejectors with different constant-area mixing sections (CAMS) diameters under single-phase …
-
Hydrogen production from biomass for use in solid oxide fuel cells
… over a temperature range of 650 - 850°C at a steam flow of 172 g min\(^-\)\(^1\) kg\(^-\)\(^1\) biochar and effects of steam flow at 850°C over a steam flow range of 54 - 277 g min\(^-\)\(^1\) kg\(^-\)\(^1\) biochar. Results revealed the transient behaviour of the process as well as the …
-
A Calculation Model for Steam Property Variation Along Wellbore Trajectory in SAGD Process
Steam-Assisted Gravity Drainage is an effective approach for recovering heavy oil and bitumen and its essence idea is to introduce steam heat into cold reservoir and reduce oil viscosity. In a typical SAGD process, two horizontal wells were drilled inside the target formation, one is put on the top …
-
Catalytic coal gasification using eutectic salt mixtures
<p>Catalytic steam gasification of Illinois #6 coal was carried out using a ternary and a binary eutectic salt mixture in a High-Pressure, High-Temperature Fixed-bed gasifier unit. The effects of catalyst addition techniques and various process variables such as temperature, system pressure, steam …
-
Investment and operational optimisation of an energy recovery engineering plant
… sources. A common practice is to use this for steam production in boiler houses, where excess steam is allocated to power generation turbines. Fluctuations in off-gas productions may, however, result in turbines shutting down, due to insuficient steam. Some investment models exist, which are …
-
Collapse of steam bubbles in subcooled water
Condensation, of steam bubbles generated at an orifice and rising freely through water, subcooled from 5 K to 36.6 K at pressures of 1 bar and 2 bar, has been analysed theoretically and experimentally. Orifice diameters were 1 mm and 2 mm, and steam flow rates of 0.5, 1 and 1.5 g/min were used. The …
-
Production of activated carbon within the indirect gasification process
… resulting char was subsequently activated with steam. During the pyrolysis stage, the temperature was varied from 750 - 900°C and the residence time was fixed at 5 minutes. The char samples obtained during the pyrolysis stage were activated at the same temperatures with steam. The steam flow …
-
Computer investigation of a destroyer steam generator
The steam generator of a DLG-9 destroyer is investigated and simulated by means of a digital computer program which was developed for this thesis. The Bailey Meter Company combustion control system is analyzed by separate control loops. The entire steam generator and control systems are simulated …
-
Estudo do acoplamento do poço injetor nas simulações de injeção cíclica de vapor
Steam injection is a method usually applied to very viscous oils and consists of injecting heat to reduce the viscosity and, therefore, increase the oil mobility, improving the oil production. For designing a steam injection project it is necessary to have a reservoir simulation in order to define …
-
Cooling by a Mist Steam Jet
… Advanced Turbine Systems (ATS), studies on mist/steam heat transfer of confined slot jet impingement have been performed with a focus to investigate the heat transfer enhancement by injecting water mists into steam jet impingement flow. Efforts have also been made to reveal the enhancement …
-
Correlation of Theory and Experiment for the Dynamics of a Pressurized Water Reactor
… 2 to determine the frequency response of the PWR steam supply system. Step inputs and multi-frequency binary signals of various sequence lengths and bit durations were used. The signals were introduced manually by the operator both for reactivity perturbation and steam flow perturbation tests. The …
-
INVESTIGATION ON SYNGAS PRODUCTION FROM BIOMASS AND PETROLEUM COKE THROUGH THE NOVEL CHEMICAL LOOPING GASIFICATION TECHNOLOGY
… char, water-gas shift, oxygen carrier reduction, steam reforming and sulfur conversion are taken into account. The concentrations of various gas products with time predicted by the simulations are in good agreement with the experimental data. The multiphase flow phenomena within the fluidized bed …
-
A study of the effect on dynamics of a nuclear boiler modification
… of the feed water injection point from the steam drum to the boiling region. On the basis of a simple mathematical model, the study is intended to be a first step in deciding the feasibility of this modification. The mathematical model is developed, and solutions of the system equations are …
-
Process modeling and operational analysis of thermal and Eeectrical energy production in Hellisheiði geothermal power plant using symmetry software
… the model's sensitivity to fluctuation in steam flow. A case study was conducted using the model to evaluate operational impacts. It examined the effect of bypassing high-pressure separation water to the heat exchangers, which reduced the electrical production of turbine unit 11 but allowed …
-
Development of a Fuzzy Logic Controller for a Distillation Column using Rockwell Software
… feed split control structure to modulate the steam flow with management of the tray temperature. In turn, this modulation maintains the composition of product at specified levels. Rockwell fuzzy designer is used to develop the fuzzy logic controller. Both a fuzzy logic controller and a PID …
-
Modeling Of USS Gasification To Evaluate New Gasifier Design In Aspen Plus
Evaluation of ultra-superheated-steam (USS) gasification efficiency of coals to produce hydrogen enriched syngas is the research motive of this joint project between the University of North Dakota and Ohio University. A new USS bubbling fuidized bed gasifier was built in Ohio and several tasks were …
-
STEADY STATE MODELING OF WET STEAM IN A PIPING SYSTEM
Current designs for steam piping systems are predicated on conservative deterministic design approaches to prevent the admission of moisture. This design approach may result in excess conservatism and larger, more inefficient components. During normal steady-state operations, the steam system …
Page 1 of 3