Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 167 for “"Steel, Structural"”.

  1. Approximate flexural-extensional relations for steel structural members

    … load-mean strain relations for steel members loaded beyond the yield point by combined bending and axial load, accounting for initial residual stresses induced in the members during their formative hot-rolling or welding processes. Since no exact relations can be found, except …

    rice Repository record for Approximate flexural-extensional relations for steel structural members (opens in a new tab)

  2. Strength and Behavior of Advanced High Strength Steel Structural Components

    Advanced High Strength Steel (AHSS) is the next generation of steel for cold-formed steel (CFS) construction. With the superior strength of AHSS, the design space of CFS structures can be greatly extended, leading to improved efficiency and less steel consumption in construction. A research …

    jhu Repository record for Strength and Behavior of Advanced High Strength Steel Structural Components (opens in a new tab)

  3. Numerical simulation of high-cyclic fatigue of steel structural members

    … as one of the most common failure mechanisms of steel components. Over the last decades a lot of methodologies have been proposed for the design of steel components against high cyclic fatigue and lot of commercial softwares have been developed in order to help civil and mechanical engineers to …

    greece Repository record for Numerical simulation of high-cyclic fatigue of steel structural members (opens in a new tab)

  4. Load and resistance factor design of cold-formed steel structural members

    … has long been used for the design of cold-formed steel structures. In this design approach, the allowable stress is always used to prevent the possible structural failure by using an appropriate factor of safety selected primarily on the basis of engineering judgment and long-time experience. …

    must-thes Repository record for Load and resistance factor design of cold-formed steel structural members (opens in a new tab)

  5. Load and resistance factor design of cold-formed stainless steel structural members

    … method has long been used for the design of steel structures in the United States. Recently, the probability-based load and resistance factor design (LRFD) criteria have been successfully applied to the structural design of hot-rolled steel shapes and built-up members. The AISI LRFD …

    must-thes Repository record for Load and resistance factor design of cold-formed stainless steel structural members (opens in a new tab)

  6. Optimization - based methodology for fatigue life extension of ship steel structural connections

    Extension of fatigue life in ship steel structural connections is commonly attained by interfering with the weldment or by affecting local parameters of the detail. In this study, structural details are approached macroscopically and a methodology is proposed that aims in minimizing the …

    greece Repository record for Optimization - based methodology for fatigue life extension of ship steel structural connections (opens in a new tab)

  7. Shear Wall Tests and Finite Element Analysis of Cold-Formed Steel Structural Members.

    The research was focused on the three major structural elements of a typical cold-formed steel building - shear wall, floor joist, and column. Part 1 of the thesis explored wider options in the steel sheet sheathing for shear walls. An experimental research was conducted on 0.030 in and 0.033 in. …

    unt Repository record for Shear Wall Tests and Finite Element Analysis of Cold-Formed Steel Structural Members. (opens in a new tab)

  8. Experimental Characterization and Computer Vision-Assisted Detection of Pitting Corrosion on Stainless Steel Structural Members

    … metallic materials. For instance, 304 stainless steel is commonly utilized in various structures (e.g., miter gates, heat exchangers, and storage tanks), but is prone to failure through pitting corrosion and stress corrosion cracking under mechanical loading, regardless of its high corrosion …

    calpoly Repository record for Experimental Characterization and Computer Vision-Assisted Detection of Pitting Corrosion on Stainless Steel Structural Members (opens in a new tab)

  9. Κριτήρια και μεθοδολογίες αποτίμησης της περιβαλλοντικής αειφορίας των μεταλλικών κατασκευών

    … and as they are currently not available for steel structural elements, primary data is collected for the development of a new LCI database which concerns the steel structural members used in structures. Hot-rolled sections (IPE, HEA etc.) are selected as the starting point and a detailed …

    greece Repository record for Κριτήρια και μεθοδολογίες αποτίμησης της περιβαλλοντικής αειφορίας των μεταλλικών κατασκευών (opens in a new tab)

  10. Web-Crippling Strength of Multi-Web Cold-Formed Steel Deck Sections Subjected to End One Flange (EOF) Loading

    … Specification for the Design of Cold-Formed Steel Structural Members provisions for web-crippling are believed to be conservative for multi-web deck sections. They are based on unfastened specimens and are limited to the use of decks with certain geometric parameters. The unified web …

    vt Repository record for Web-Crippling Strength of Multi-Web Cold-Formed Steel Deck Sections Subjected to End One Flange (EOF) Loading (opens in a new tab)

  11. Development of innovative thin-walled composite cold-formed Steel/ECC structural elements

    … aims to develop new thin-walled composite structural elements comprising cold-formed steel (CFS) open sections and thin layers of engineered cementitious composites (ECC) with higher flexural, shear and axial compressive capacities and enhanced buckling behaviours compared to the bare CFS …

    adelaide Repository record for Development of innovative thin-walled composite cold-formed Steel/ECC structural elements (opens in a new tab)

  12. Avaliação do comportamento teórico e experimental em espécimes de telhas metálicas autoportantes submetidas à flexão

    … Factor Design Specification for Cold-Formed Steel Structural Members”, complementadas por uma análise linear elástica com base no método de elementos finitos.

    brazil-ufrgs Repository record for Avaliação do comportamento teórico e experimental em espécimes de telhas metálicas autoportantes submetidas à flexão (opens in a new tab)

  13. Cold-Formed Steel Behavior: Elastic Buckling Simplified Methods for Structural Members with Edge-Stiffened Holes and Purlin Distortional Buckling Strength Under Gravity Loading

    Elastic Buckling Simplified Methods for Structural Members with Edge-Stiffened Holes: Presently, the current design methods available to engineers to predict the strength of cold-formed steel members with edge-stiffened holes remains largely unaddressed in the North American Specification for the …

    vt Repository record for Cold-Formed Steel Behavior: Elastic Buckling Simplified Methods for Structural Members with Edge-Stiffened Holes and Purlin Distortional Buckling Strength Under Gravity Loading (opens in a new tab)

  14. Cold-Formed Steel Bolted Connections without Washers on Oversized and Slotted Holes

    The use of the cold-formed steel sheet bolted connections without washers is so significant; however, the North American Specifications for the Design of Cold Formed Steel Structural Members, NASPEC, doesn't provide provisions for such connections. The bearing failure of sheet and the shear failure …

    unt Repository record for Cold-Formed Steel Bolted Connections without Washers on Oversized and Slotted Holes (opens in a new tab)

  15. Strength of Cold-Formed Steel Jamb Stud-To-Track Connections

    Cold-formed steel structural members are used extensively in building construction, with a common application being wind load bearing steel studs. The studs frame into horizontal steel track members at the top and bottom of the wall assembly, with the stud-to-track connection typically being made …

    waterloo Repository record for Strength of Cold-Formed Steel Jamb Stud-To-Track Connections (opens in a new tab)

  16. Bearing Strength of Cold Formed Steel Bolted Connections in Trusses

    … in North American Specification for Cold- Formed Steel Structural Member (AISI S100) for the bearing strength of bolted connections were developed from tests on bolted connected sheets which were restrained by bolt nut and head with or without washers. However, in the cold-formed assemblies, …

    unt Repository record for Bearing Strength of Cold Formed Steel Bolted Connections in Trusses (opens in a new tab)

Page 1 of 9