Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Steel, Structural--Testing"”.

  1. A brief study of welded joints of structural steel

    Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1931

    msu Repository record for A brief study of welded joints of structural steel (opens in a new tab)

  2. Strain Rate Effects on a Ductile Moment Resisting Frame with RBS Connection Subjected to Seismic Ground Motions

    … at different strain rates for two grades of steel. The strain rate dependent material properties for these materials are used in different combinations on beams and columns of moment resisting frame (MRF) with RBS to conduct non-linear dynamic analyses subjected to earthquake records at …

    carleton Repository record for Strain Rate Effects on a Ductile Moment Resisting Frame with RBS Connection Subjected to Seismic Ground Motions (opens in a new tab)

  3. A fracture mechanics-based approach for modeling delamination of spray-applied fire-resistive materials from steel structures

    Steel structures exhibit lower fire-resistance due to high thermal conductivity of steel and rapid deterioration of strength and stiffness properties of steel with temperature. Therefore, steel structures are to be provided with fire insulation to achieve required fire resistance. This is often …

    msu Repository record for A fracture mechanics-based approach for modeling delamination of spray-applied fire-resistive materials from steel structures (opens in a new tab)

  4. Shear and Compression Strength of Cold-formed Steel Clip Angles Subjected to Different Screw Patterns

    … and numerical analysis of the cold-formed steel clip angle in three different limit states which are shear, compression, and combination of the screw connection. A previous cold-formed steel clip angle test program (which is Phase 1) developed design methods for clip angle. Therefore, the …

    unt Repository record for Shear and Compression Strength of Cold-formed Steel Clip Angles Subjected to Different Screw Patterns (opens in a new tab)

  5. Characterization of fatigue damage in A36 steel specimens using nonlinear Rayleigh surface waves

    A36 steel is a commonly used material in civil engineering structures where fatigue damage can lead to catastrophic failure. In this research, nonlinear Rayleigh surface waves are used to characterize damage in A36 steel specimens caused by monotonic tension and low cycle fatigue. Fatigue damage …

    gatech Repository record for Characterization of fatigue damage in A36 steel specimens using nonlinear Rayleigh surface waves (opens in a new tab)

  6. Direct Strength Method for Web Crippling of Cold-formed Steel C and Z Sections Subjected to Interior One Flange Loading and End One Flange Loading

    … the web crippling strength of cold-formed steel C and Z sections subjected to End one flange loading and Interior one flange loading conditions. Direct strength method is applied for designing the columns and beams earlier. The existing specifications equation for calculating the web …

    unt Repository record for Direct Strength Method for Web Crippling of Cold-formed Steel C and Z Sections Subjected to Interior One Flange Loading and End One Flange Loading (opens in a new tab)

  7. Seismic Performance Evaluation of Novel Cold-Formed Steel Framed Shear Walls Sheathed with Corrugated Steel Sheets

    … and numerical analysis of a novel cold-formed steel framed shear wall sheathed with corrugated steel sheets. The objective of this newly designed shear wall is to meet the growing demand of mid-rise buildings and the combustibility requirement in the International Building Code. The strength of …

    unt Repository record for Seismic Performance Evaluation of Novel Cold-Formed Steel Framed Shear Walls Sheathed with Corrugated Steel Sheets (opens in a new tab)

  8. Assessment of risk of disproportionate collapse of steel building structures exposed to multiple hazards

    … issues. This dissertation is aimed at developing structural models and analysis procedures for robustness assessment of steel building structures typical of construction practices in the United States, and assessing the performance of these typical structures. Beam-column connections are usually …

    gatech Repository record for Assessment of risk of disproportionate collapse of steel building structures exposed to multiple hazards (opens in a new tab)

  9. Shear and Bending Strength of Cold-Formed Steel Solid Wall Panels Using Corrugated Steel Sheets for Mobile Shelters

    … as a feasible connection method for cold formed steel (CFS) shear walls subject to lateral force of either seismic or wind loads on mobile shelters. The research consisted of three phases which include: a design as a 3D BIM model, connection tests of the resistance spot weld, and full-scale …

    unt Repository record for Shear and Bending Strength of Cold-Formed Steel Solid Wall Panels Using Corrugated Steel Sheets for Mobile Shelters (opens in a new tab)

  10. Nominal Shear Strength and Seismic Detailing of Cold-formed Steel Shear Walls using Steel Sheet Sheathing

    … monotonic and cyclic tests on cold-formed steel shear walls sheathed with steel sheets on one side were conducted to (1) verify the published nominal shear strength for 18-mil and 27-mil steel sheets; and (2) investigate the behavior of 6-ft. wide shear walls with multiple steel sheets. In …

    unt Repository record for Nominal Shear Strength and Seismic Detailing of Cold-formed Steel Shear Walls using Steel Sheet Sheathing (opens in a new tab)

  11. Analytical Model for Lateral Deflection in Cold-formed Steel Framed Shear Walls with Steel Sheathing

    … model for lateral deflection in cold-formed steel shear walls sheathed with steel is developed in this research. The model is based on the four factors: fastener displacement, steel sheet deformation, and hold-down deformation, which are from the effective strip concept and a complexity …

    unt Repository record for Analytical Model for Lateral Deflection in Cold-formed Steel Framed Shear Walls with Steel Sheathing (opens in a new tab)

  12. Shear Wall Tests and Finite Element Analysis of Cold-Formed Steel Structural Members.

    The research was focused on the three major structural elements of a typical cold-formed steel building - shear wall, floor joist, and column. Part 1 of the thesis explored wider options in the steel sheet sheathing for shear walls. An experimental research was conducted on 0.030 in and 0.033 in. …

    unt Repository record for Shear Wall Tests and Finite Element Analysis of Cold-Formed Steel Structural Members. (opens in a new tab)

Page 1 of 2