Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 164 for “"Steel Beams"”.
-
Natural frequencies of steel beams.
… in frequencies between the actual and ideal beams. An electromagnetic exciting device was used for the investigation to excite the beams.
-
Single plate connections for steel beams
Single plate connections for steel beams, connected by high strength bolts to the beam web and welded to the column, were investigated to determine their, behaviour. Tests were performed on the connections in the absence and in the presence of shear, and shear was found not to affect the rigidity …
-
Buckling of high-strength steel beams
… studies on the instability of I-section beams fabricated from high-strength steel (HSS) plates having yield stresses greater than 690 MPa. The research program contains three major tests including the assessment of residual stresses in welded I-sections, the buckling of I-beams and the …
-
The Structural Behaviour of Castellated Rolled Steel Beams
Abstract Not Provided.
-
On the deflection of s32003 stainless steel beams
… S32003 (ATI 2003®) hot-rolled duplex stainless steel flat plates. All specimens were tested as simply supported beams loaded at the midspan. Test specimens had nominal width and thickness of 1 in. and 0.25 in., respectively. Four different span lengths of 4 in., 6 in., 9 in., and 12 in. were …
-
Experiments on Cold-Formed Steel Beams with Holes
… were performed on 68 C-section cold-formed steel joists with unstiffened rectangular web holes. Four Steel Stud Manufacturers Association (SSMA) cross-section types; 800S200-33, 800S200-43, 1000S162-54, and 1200S162-97, were evaluated to explore the influence of holes on local, distortional, …
-
STEEL BEAMS STRENGTHENED WITH ULTRA HIGH MODULUS CFRP LAMINATES
… research on the application of FRP composites to steel structures has been limited. The use of FRP material for the repair and rehabilitation of steel members has numerous benefits over the traditional methods of bolting or welding of steel plates. Carbon FRPs (CFRPs) have been preferred over …
-
Behavior of steel beams subjected to alternating inelastic strains
… fialure characterisitcs of cantilevered rolled steel beams which undergo alternating inelastic strains. The beams are clamped into a rigid fixture to avoid connection problems, and are loaded cyclically between equal positive and negative values of end deflection which are of a magnitude such …
-
Web crippling of high strength cold-formed steel beams
… structural behavior of high strength cold-formed steel beams subjected primarily to web crippling was investigated analytically and experimentally. In this study hat sections and I-beams, formed from five different types of high strength sheet steels commonly used in the automobile industry, were …
-
The Bracing Requirements of Steel Beams of Intermediate Slenderness
Steel beams, whether rolled or built-up, contain unavoidable initial imperfections and residual stresses and are subject to unintentional eccentricity of applied loading. Such beams which also possess inadequate lateral restraint are prone to failure as a result of lateral-torsional instability, …
-
Plastic Behavior of Deep Steel Beams Including Shear Effect
Made available in DSpace on 2014-12-05T17:37:09Z (GMT). No. of bitstreams: 1 6003909.pdf: 2547477 bytes, checksum: c74ce4f255cf3b0e69a8b4da245ae4c5 (MD5) Previous issue date: 1960
-
Buckling behaviour of cold-formed steel beams with web perforations
Cold-formed steel (CFS) members are widely used in the constructional industry, because CFS has high strength-to-weight ratio and can be easily fabricated into different shapes. In order to accommodate services like electric wires and pipelines, perforations are commonly punched into the web of CFS …
-
Wood deck bridges-stress laminated wood panels on steel beams
… bridge deck model stiffened with wide flange steel stringers for performance monitoring. The simulation accounted for typical HS-20 repetitive loadings offered by a mechanically controlled actuator.;Based on the results incorporated in this report and additional projects accredited in the …
-
Analysis of Steel Beams Strengthened with Adhesively - Bonded GFRP Plates
… and cost-effective alternative to steel plates for strengthening steel members. Typically, GFRP plates are bonded to steel members through a relatively soft adhesive layer. The large difference between the mechanical properties of the three materials involved is generally associated …
-
Distortional Static and Buckling Analysis of Wide Flange Steel Beams
… and conventional analysis methods for structural steel members are based on the simplifying kinematic Vlasov assumption that neglects cross-sectional distortional effects. While the non-distortional assumption can lead to reasonable predictions of beam static response and buckling strength in …
-
Connections between steel beams and concrete -filled steel tube columns
Concrete filled tube (CFT) columns combine steel and concrete in one member, which results in a member that has the beneficial qualities of both materials. Although CFT columns are suitable for tall buildings in high seismic regions, their use has been limited due to lack of information about the …
-
Inelastic Behavior of Mild Steel Beams Subjected to Transverse Impact
Made available in DSpace on 2015-05-12T17:06:20Z (GMT). No. of bitstreams: 2 license.txt: 4848 bytes, checksum: 96035ab3f5e1c23cc7138a224ce498bd (MD5) 0015224.PDF: 6934418 bytes, checksum: 10048783aefb58d2db5bd523ed706712 (MD5) Previous issue date: 1955
-
An Analytical Study of the Behavior of Prestressed Steel Beams
Made available in DSpace on 2014-12-05T17:37:20Z (GMT). No. of bitstreams: 1 6104309.pdf: 3354065 bytes, checksum: 512aacbd9be60f8b3a13f0ccb6c0827d (MD5) Previous issue date: 1961
Page 1 of 9