Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 73 for “"Steel Column"”.

  1. EXPERIMENTAL AND NUMERICAL FAILURE ANALYSIS OF DEEP STEEL COLUMN SECTIONS

    … limit state of collapse is approached. Exterior columns in perimeter steel moment-resisting frame structures that are exposed to strong earthquakes experience bending moment demands with high levels of axial load due to overturning. Deep wide flange sections can be used as exterior columns to …

    unh-thes Repository record for EXPERIMENTAL AND NUMERICAL FAILURE ANALYSIS OF DEEP STEEL COLUMN SECTIONS (opens in a new tab)

  2. Semi rigid connections and their influence on steel column behaviour.

    … rotational behaviour of practical beam- to-column connections, as used in steel frames, has also been reviewed. This data is found to be a non- linear function of connection deformation. Methods of mathematically modelling connection data have been reviewed and an improved representation …

    whiterose Download PDF for Semi rigid connections and their influence on steel column behaviour. (opens in a new tab)

  3. Investigating multi-axis long-duration blast response of steel column sections

    … to drag-sensitive structural elements such as steel columns. A number of recent large-scale industrial accidents have highlighted the potential for multiple detonations to occur that can cause long-duration blasts to successively interact with structures, and constituent column elements from …

    soton Download PDF for Investigating multi-axis long-duration blast response of steel column sections (opens in a new tab)

  4. Simple Models for Estimating the Rotational Stiffness of Steel Column-to-Footing Connections

    … loads from the superstructure to the foundation, steel column-to-footing connections have received little attention in research. Though shallow embedded connections are typically characterized as pinned, studies have shown that they exhibit significant rotational stiffness. The objective of this …

    byu Repository record for Simple Models for Estimating the Rotational Stiffness of Steel Column-to-Footing Connections (opens in a new tab) Download PDF for Simple Models for Estimating the Rotational Stiffness of Steel Column-to-Footing Connections (opens in a new tab)

  5. Dynamic Behaviour of a Fixed-end Square Hollow Section Steel Column Subjected to Wind Flow

    Steel lattice structures are widely used in the structural engineering. These structures are light in weight and usually all structural elements are exposed to wind. This forms that fact that wind loads are highly dependent of the cross-section of structural elements. Although there are several …

    chalmers Repository record for Dynamic Behaviour of a Fixed-end Square Hollow Section Steel Column Subjected to Wind Flow (opens in a new tab)

  6. A study of the behavior of a composite concrete and steel column under the influence of combined axial and flexural loads

    In a theoretical bean-column analysis it is necessary to know the value of the effective modulus of elasticity in order to compute the critical buckling load of the member in compression. The composite specimens of this study had a slenderness ratio, 1/k « 62.7 and were not in the Euler range of …

    rice Repository record for A study of the behavior of a composite concrete and steel column under the influence of combined axial and flexural loads (opens in a new tab)

  7. The behaviour and design of demountable connections to promote the reduction and reuse of structural steel in steel and composite buildings

    … and performance of the conventional steel column connections under various loading conditions through the developed finite element model, with which the accuracy of the behaviour prediction for the steel column connections can be significantly improved. The concept of demountability …

    unsw Repository record for The behaviour and design of demountable connections to promote the reduction and reuse of structural steel in steel and composite buildings (opens in a new tab)

  8. Unbonded Pre-tensioned Bridge Columns with Hybrid Fiber-Reinforced Concrete Shells

    … than in previously tested reinforced concrete columns (Pang et al. 2008, Haraldsson et al. 2012). Two columns were designed and tested in the University of Washington Structural Laboratory. In the plastic-hinge region of the columns a very ductile concrete shell was added. The shell was made of …

    washington Repository record for Unbonded Pre-tensioned Bridge Columns with Hybrid Fiber-Reinforced Concrete Shells (opens in a new tab)

  9. Rotational Stiffness Models for Shallow Embedded Column-to-Footing Connections

    Shallow embedded steel column connections are widely used in steel buildings; however, there is insufficient research about this connection type to understand the actual rotational stiffness that the connection provides. Shallow embedded steel columns are when a steel column is anchored to the …

    byu Repository record for Rotational Stiffness Models for Shallow Embedded Column-to-Footing Connections (opens in a new tab) Download PDF for Rotational Stiffness Models for Shallow Embedded Column-to-Footing Connections (opens in a new tab)

  10. An assessment of the performance of semiconductor gas sensors as gas chromatographic detectors.

    … samples. A 1.5 meter x 4 millimeter stainless steel column packed with active carbon type 208C (60-72 B.S.mesh) at 40 G was used; to separate hydrogen, carbon monoxide and methane using purified air as carrier gas. Optimum operating conditions for the T.G.S.711 sensor: heater voltage 6.5 volts …

    sheffield-hallam Download PDF for An assessment of the performance of semiconductor gas sensors as gas chromatographic detectors. (opens in a new tab)

  11. Prekybos centro Midaugas Šiauliuose statybos [projektas /

    … the structural part, 14.50 m between the support steel truss and 6.50 m long steel column is calculated. In the technological part, a technological card for floor tiles has been prepared,, describes the work safety part. In the estimated part, the installation costs of the building components are …

    vilnius Repository record for Prekybos centro Midaugas Šiauliuose statybos [projektas / (opens in a new tab)

  12. Evaluation of steel columns under fire: Real-time hybrid testing and reliability assessment

    … strategy is applied to an example of a steel moment frame with one column under fire. The steel column experiences thermal expansion until it buckles at elevated temperatures. The real-time hybrid fire simulation is able to capture the dynamic behavior at the time of column failure, for …

    buffalo Repository record for Evaluation of steel columns under fire: Real-time hybrid testing and reliability assessment (opens in a new tab)

  13. Modelling the Fire Performance of Hybrid Steel-Timber Connections

    … structure, wood can be used in conjunction with steel or concrete material to form what is known as a hybrid building system. In this research, a steel-timber hybrid system is considered, which consists of a glulam wooden beam connected to a steel column. The connection of the beam to the column …

    carleton Repository record for Modelling the Fire Performance of Hybrid Steel-Timber Connections (opens in a new tab)

  14. Code provisions and practical design examples of hooked bar anchorage

    … Examples of standard hooks in exterior beam-column joint and hooked bar anchorage details for reinforced concrete beam-SRC column joints are discussed. The general behavior of anchorage of hooked reinforcing bars is summarized from a review of previous studies. Then, design requirements for …

    texas Repository record for Code provisions and practical design examples of hooked bar anchorage (opens in a new tab)

  15. Application of soil mechanics and the finite element method (FEM) to High Performance Liquid Chromatography (HPLC) columns

    … of High Performance Liquid Chromatography columns is often reduced due to radial variations of the density or void ratio of the silica packing material. This heterogeneity is due to wall friction effects during column preparation, and although the friction reduces the column efficiency, …

    ut-knoxville Repository record for Application of soil mechanics and the finite element method (FEM) to High Performance Liquid Chromatography (HPLC) columns (opens in a new tab)

  16. Investigation of the formation of volatile fission products using furnace and gamma detectors

    … The sample was then loaded into a stainless-steel column which was suspended within a furnace and heated at 400-500°C. The activity of the Re was monitored using two external gamma detectors placed at different heights along the column, and the resulting gamma counts were used to determine …

    texas Repository record for Investigation of the formation of volatile fission products using furnace and gamma detectors (opens in a new tab)

  17. Rehabilitation of steel bridge members with FRP composite materials

    … of FRP composites on the strengthening steel bridge structures. In particular, the work focuses on both rehabilitation of steel bridge girders (flexural members), and steel bridge columns (compression members) with FRP composite materials. The first paper focuses on the flexural steel …

    must-thes Repository record for Rehabilitation of steel bridge members with FRP composite materials (opens in a new tab)

  18. Probabilistic models for blast parameters and fragility estimates of steel columns subject to blast loads

    … to predict the failure probabilities of steel columns subject to blast loads. The framework considers the uncertainties in the blast phenomenon, the demands imposed on the column, and the capacities of the column for the limit states of flexure, local buckling and global buckling. As part …

    uiuc Repository record for Probabilistic models for blast parameters and fragility estimates of steel columns subject to blast loads (opens in a new tab)

Page 1 of 4