Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 145 for “"Steel Fiber"”.

  1. Investigation of flexural behavior of steel fiber reinforced concrete and steel fiber orientation control during construction

    … in structural application is the use of deformed steel bars. However, despite its popularity, steel bar reinforcement has a number of disadvantages. Thus, alternative methods of reinforcement have been developed, one of which is steel fiber reinforcement. The addition of steel fibers in concrete …

    louisville Repository record for Investigation of flexural behavior of steel fiber reinforced concrete and steel fiber orientation control during construction (opens in a new tab)

  2. The Study of Steel Fiber Reinforced Concrete

    … of this study was to determine the effects of fiber volume, heat treatment of fiber, and use of inorganic accelerators on the static compressive strength of steel fiber reinforced concrete. Seven separate test series using 3" x 6" cylinders were conducted. Each series consisted of 15 cylinders …

    northern-iowa Repository record for The Study of Steel Fiber Reinforced Concrete (opens in a new tab)

  3. Workability and Strength Properties of Steel Fiber Reinforced Concrete

    <p>The strength properties of fiber concrete have received much attention in the past with little emphasis being placed on the workability of the composite in its fresh state. Both field and laboratory studies have identified workability of the composite as a potential problem due to fiber addition …

    mcmaster Repository record for Workability and Strength Properties of Steel Fiber Reinforced Concrete (opens in a new tab)

  4. Use of non-steel fiber reinforcement in concrete tunnel lining

    Fiber reinforcement is being widely used in concrete tunnel linings these days. Using fiber reinforcement can save not only cost, but also labor and time spent on construction. However, many owners hesitate to incorporate fiber reinforcement in tunnel lining due to lack of experience with and …

    texas Repository record for Use of non-steel fiber reinforcement in concrete tunnel lining (opens in a new tab)

  5. Tensile Behaviour of Ultra-High-Performance Steel Fiber Reinforced Concrete

    … resistance to tension. However, corrosion of steel reinforcement inevitably occurs due to carbonation and chloride ingress, which significantly reduces the service life of structures. An alternative to this predicament is now feasible with the advent in cementitious material technologies, such …

    york Repository record for Tensile Behaviour of Ultra-High-Performance Steel Fiber Reinforced Concrete (opens in a new tab)

  6. Bond of Reinforcing Bars to Steel Fiber Reinforced Concrete (SFRC)

    The use of steel fiber reinforced concrete (SFRC hereafter) is becoming more and more common. Building codes and recommendations are gradually including the positive effect of fibers on mechanical properties of concrete. How to take advantage of the higher ductility and energy absorption capacity …

    upv Repository record for Bond of Reinforcing Bars to Steel Fiber Reinforced Concrete (SFRC) (opens in a new tab)

  7. Structural Behaviour of Self Consolidating Steel Fiber Reinforced Concrete Beams

    … closely-spaced stirrups are required. The use of steel fiber reinforced concrete (SFRC) could be considered as a potential alternative to the use of traditional shear reinforcement. Concrete is very weak and brittle in tension, SFRC transforms this behaviour and improves the diagonal tension …

    ottawa-retro Repository record for Structural Behaviour of Self Consolidating Steel Fiber Reinforced Concrete Beams (opens in a new tab)

  8. The feasibility of using steel fiber reinforced concrete in rectangular containers

    <p>Steel fiber reinforced concrete (SFRC) was tested to determine the feasibility of its use in the production of rectangular waste containers. Three steel fiber lengths (5/8-inch, 3/4-inch, 1-inch) were tested. It was found that the optimum fiber content was 2% by volume based on the workability …

    ut-knoxville Repository record for The feasibility of using steel fiber reinforced concrete in rectangular containers (opens in a new tab)

  9. Evaluation of Roller-Compacted Concrete Pavement Incorporated with Recycled Steel Fiber

    … concrete (RCC) incorporating manufactured steel fibers (MSF) and recycled steel fibers (RSF). Five mixtures were investigated: a control mixture, 0.5% and 1.0% MSF mixtures, and 0.5% and 1.0% RSF mixtures. The results showed that both types of steel fibers significantly enhanced the …

    texas-state Repository record for Evaluation of Roller-Compacted Concrete Pavement Incorporated with Recycled Steel Fiber (opens in a new tab)

  10. STRUCTURAL BEHAVIOR OF STEEL FIBER REINFORCED CONCRETE SLABS WITHOUT TRADITIONAL REINFORCEMENT

    In recent times, steel fiber reinforced concrete (SFRC) slab-on-pile systems without traditional reinforcement has seen increasing popularity owing to its ease-in-construction. In this thesis, a comprehensive experimental and analytical investigation on the structural behavior of SFRC flexural …

    nus Repository record for STRUCTURAL BEHAVIOR OF STEEL FIBER REINFORCED CONCRETE SLABS WITHOUT TRADITIONAL REINFORCEMENT (opens in a new tab) Download file for STRUCTURAL BEHAVIOR OF STEEL FIBER REINFORCED CONCRETE SLABS WITHOUT TRADITIONAL REINFORCEMENT (opens in a new tab)

  11. Rebound and toughening mechanisms in steel fiber reinforced dry-mix shotcrete

    … material loss due to rebound. For cases in which steel fibers are used, fiber rebound tends to be even greater at approximately 75%. This represents one of the main drawbacks to this technique and is one of the primary challenges facing the shotcrete industry today. Therefore, this work aimed at …

    ubc Repository record for Rebound and toughening mechanisms in steel fiber reinforced dry-mix shotcrete (opens in a new tab) Download PDF for Rebound and toughening mechanisms in steel fiber reinforced dry-mix shotcrete (opens in a new tab)

  12. Ultrasonic Pulse Velocity Investigation of Steel Fiber Reinforced Self-Compacted Concrete

    … by adding short and randomly distributed steel fibers, it is possible to improve the ductility and other basic properties of concrete. However, the addition of steel fibers results in loss of workability of the concrete, especially in self-compacted concrete. Therefore, in this study, …

    unlv Repository record for Ultrasonic Pulse Velocity Investigation of Steel Fiber Reinforced Self-Compacted Concrete (opens in a new tab) Download PDF for Ultrasonic Pulse Velocity Investigation of Steel Fiber Reinforced Self-Compacted Concrete (opens in a new tab)

  13. Single Straight Steel Fiber Pullout Characterization in Ultra-High Performance Concrete

    … investigation to characterize single straight steel fiber pullout in Ultra-High Performance Concrete (UHPC). Several parameters were explored including the distance of fibers to the edge of specimen, distance between fibers, and fiber volume in the matrix. The pullout load versus slip curve was …

    vt Repository record for Single Straight Steel Fiber Pullout Characterization in Ultra-High Performance Concrete (opens in a new tab)

  14. Nondestructive characterization methods for quality control of steel fiber reinforced concrete

    … on their need to nondestructively characterize steel fiber dispersion and orientation within concrete wind-tower elements in order to ensure adequate structural capacity. This thesis documents the nondestructive testing research effort. A literature review was performed and preliminary …

    uiuc Repository record for Nondestructive characterization methods for quality control of steel fiber reinforced concrete (opens in a new tab)

  15. Double-punch test for evaluating the performance of steel fiber-reinforced concrete

    … protocols for comparing the effectiveness of fiber-reinforced concrete (FRC) mixtures with high-performance steel fibers. Steel fibers can be added to fresh concrete to increase the tensile strength, ductility, and durability of concrete structures. In order to quantify steel fiber-reinforced …

    texas Repository record for Double-punch test for evaluating the performance of steel fiber-reinforced concrete (opens in a new tab)

  16. Mechanical properties and impact resistance of steel fiber reinforced lightweight aggregate concrete

    … and drying shrinkage of both plain and fiber-reinforced lightweight aggregate concrete. Effects of coarse and fine lightweight aggregates, silica fume, and steel fibers are studied and discussed. The results are also compared with those of normal weight concrete. The impact resistance of …

    nus Repository record for Mechanical properties and impact resistance of steel fiber reinforced lightweight aggregate concrete (opens in a new tab) Download file for Mechanical properties and impact resistance of steel fiber reinforced lightweight aggregate concrete (opens in a new tab)

  17. Bond of deformed bars in steel fiber-reinforced concrete under cyclic loading

    … bond behaviour of deformed bars in plain and steel fiber reinforced concrete was studied. The intent was to examine the feasibility of using steel fibrous concrete to improve anchorage bond performance in beam-column joints in moment resisting frame structures for seismic resistance. …

    ubc Repository record for Bond of deformed bars in steel fiber-reinforced concrete under cyclic loading (opens in a new tab) Download PDF for Bond of deformed bars in steel fiber-reinforced concrete under cyclic loading (opens in a new tab)

Page 1 of 8