Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"Steel Moment Frame"”.
-
Effect of Viscous Fluid Dampers on Steel Moment Frame Designed for Strength and Hybrid Steel Moment Frame Design
… viscous fluid dampers on a nine story special steel moment frame designed for strength in Seattle. At the initial stages of the work, knowing the fact that moment frames are almost always controlled by drift, it was thought that two different moment frames, controlled by strength or controlled …
-
OPTIMIZATION OF STEEL MOMENT FRAME USING HARMONY SEARCH ALGORITHM
… cross-sectional areas that leads to find optimal steel sizes considering design constrains such as: stress, deflection, and lateral displacement limitations. The HS algorithm obtained lighter weight of steel frames by selecting a suitable steel section from the American Institute of Steel …
-
Redundancy in Steel Moment Frame Systems Under Seismic Excitations
Finally, a framework is proposed for evaluation of structural redundancy against incipient collapse limit state. In this framework: (1) the maximum column drift ratio (MCDR) or biaxial spectral acceleration (BSA) is used to measure both demand and capacity of a given building; (2) the demand and …
-
Structural Redundancy of Dual and Steel Moment Frame Systems Under Seismic Excitation
The proposed uniform-risk redundancy factor is then compared with the reliability and redundancy factor (rho) in the 1996 SEAOC Blue Book, NEHRP 97, and UBC 97, which depends on the system configuration only. The results show the inadequacies of the latter approach in describing the redundancy of a …
-
Development of Multiobjective Optimization Procedures for Seismic Design of Steel Moment Frame Structures
… optimization of code-compliant regular plane steel special moment resisting frame structures with simultaneous as well as separate treatment of multiple objective functions that reflect steel material usage, initial expenses, degree of design complexity, seismic structural performance indices, …
-
Finite element analysis of steel moment frame joints with doubler plates and continuity plates
… in beam-column joints in seismic resistant steel moment frames, with a focus on the interaction between continuity plates and extended doubler plates. Several recent studies have examined this same issue, but utilized a simplified finite element model of the panel zone region that did not …
-
Probabilistic Seismic Damage Assessment And Repair Cost Analysis Of Existing Steel Moment Frame Buildings
… motions, and failure. An existing eight-story steel moment frame building located in Los Angeles, California is chosen as a case study to illustrate the application of the stochastic methods. To evaluate the seismic reliability of the building, a large number of ground motions are generated …
-
Computational Fracture Prediction in Steel Moment Frame Structures with the Application of Artificial Neural Networks
Damage to steel moment frames in the 1994 Northridge and 1995 Hyogken-Nanbu earthquakes subsequently motivated intensive research and testing efforts in the US, Japan, and elsewhere on moment frames. Despite extensive past research efforts, one important problem remains unresolved: the degree of …
-
Ductile Design and Predicted Inelastic Response of Steel Moment Frame Buildings for Extreme Wind Loads
… factor). A three-story office building that uses steel moment frames as the primary lateral force resisting system was examined to test the hypothesis. Various levels of ductility were included based on ductility requirements for material strength, section stability and system stability originally …
-
Using Incremental Dynamic Analysis to Visualize the Effects of Viscous Fluid Dampers on Steel Moment Frame Drift
… dampers in controlling the interstory drift in steel moment frames, and the use of incremental dynamic analysis as a method of visualizing the behavior of these moment frames when subjected to seismic load effects. Models of three story and nine story steel moment frames were designed to meet …
-
Evaluating the Effect of Decking Fasteners on the Seismic Behavior of Steel Moment Frame Plastic Hinge Regions
A series of full-scale beam-to-column moment connection tests were completed to determine the effects of powder actuated fasteners (PAF) and puddle welds on the seismic behavior of steel moment connections. In seismic regions, PAF are currently prohibited in the connection region (referred to as …
-
Multi-hazard performance of steel moment frame buildings with collapse prevention systems in the central and eastern United States
… the focus of this study is on structural steel-frame buildings using either non-ductile moment frames with fully-restrained flange welded connections not specifically detailed for seismic resistance, or ductile moment frames with reduced beam section connections designed for moderate …
-
Optimal Panel Zone Participation in Steel Moment Frames
… zones in the seismic response of buildings using steel moment frames. To address this debated matter requires well-developed finite element models that can accurately simulate the behavior of frame systems under a variety of ground motions. A procedure to form an optimally designed frame …
-
Assessment of Floor Accelerations in Yielding Buildings
… The present study uses OpenSees finite element framework to develop full three dimensional models of four steel moment frame buildings. The incremental dynamic analysis method is employed to evaluate the floor response of inelastic steel moment frame buildings subjected to all three components …
-
Clt infill panels in steel moment resisting frames as a hybrid seismic force resisting system
This paper examines CLT-steel hybrid systems at three, six, and nine storey heights to increase seismic force resistance compared to a plain wood system. CLT panels are used as infill in a steel moment frame combining the ductility of a steel moment frame system with a stiffness and light weight of …
-
Seismic Rehabilitation of Steel Moment Frames Vulnerable to Soft-Story Failures Through Implementation of Rocking Cores
During seismic events, inefficient steel moment frame building systems may exhibit soft-story failures. This thesis focuses on development and validation of a seismic retrofit strategy for avoiding soft-story failures in low-rise and mid-rise steel moment frame buildings. The considered retrofit …
-
Development, Analysis and Testing of a Hybrid Passive Control Device for Seismic Protection of Framed Structures
… study using hybrid devices in a 9-story steel moment frame structure. The devices were found to provide improved response over a special steel moment frame and a moment frame combined with a buckling restrained brace frame.
-
Design provisions for autoclaved aerated concrete (AAC) infilled steel moment frames
… the seismic behavior and design of AAC-infilled steel moment frames are investigated systematically. The fundamental vehicle for this investigation is the ATC-63 methodology, which is intended for the establishment of seismic design factors for structural systems. The ATC-63 methodology is …
-
Mathematical Formulation of Tools for Assessment of Fragility and Vulnerability of Damaged Buildings
… for aftershocks to cause additional damage to steel moment frame buildings, utilizing a technique designed to enhance the efficiency of Monte Carlo simulation in estimating low-probability events. Relatively simple probabilistic tools are proposed for purposes of rapid structural evaluation and …
Page 1 of 3