Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Steel Wool"”.

  1. Mechanism for heterogeneous reduction of selenite by zero valent iron-steel wool.

    Although selenium is as essential element for animal and human growth, selenium released from coal mining process and coal combustion residues to surface and groundwater may cause toxicity to aquatic life. There is urgent need for an easy and accurate analytical method to speciate and determine …

    wvu Repository record for Mechanism for heterogeneous reduction of selenite by zero valent iron-steel wool. (opens in a new tab)

  2. Removal of oil droplets from produced water using superparamagnetic iron oxide nanoparticles

    … conditions. An unstructured magnetic mesh (steel wool) was placed within the flow channel to enhance the magnetic gradient and capture efficiency. Key parameters such as MNP concentration, initial oil content, and the amount of steel wool were systematically varied. Notably, oil removal …

    texas Repository record for Removal of oil droplets from produced water using superparamagnetic iron oxide nanoparticles (opens in a new tab)

  3. Microstructure-strength relationships of heavily deformed magnesium-lithium composites containing steel fibers

    … melting temperatures, was used to permeate steel wool preforms with molten magnesium-lithium (Mg-Li) alloys. The selected matrix alloys were hexagonal close packed (HCP) Mg-4wt%Li or body centered cubic (BCC) Mg-12wt%Li; the low carbon steel wool fibers were predominantly BCC ferrite. These …

    iastate Repository record for Microstructure-strength relationships of heavily deformed magnesium-lithium composites containing steel fibers (opens in a new tab)

  4. Heat transfer and flow friction characteristics of fibrous metals.

    … heat transfer characteristics of four grades of steel wool, considered to be representative of fibrous metals, were determined. The flow friction characteristics were determined on the basis of the isothermal pressure drop across the medium, while the heat transfer results were determined by …

    nps Repository record for Heat transfer and flow friction characteristics of fibrous metals. (opens in a new tab)

  5. Apparatus for measuring the absorption of sound by noise in one dimension.

    … of the last section. The termination is made of steel wool of tapered density distribution. Pulse reflection measurements yielded an absorption of 40 dB or greater for frequencies of 500 Hz and higher. Reflected signals of the junctions were typically 40 dB down. Linear attenuation measurements …

    nps Repository record for Apparatus for measuring the absorption of sound by noise in one dimension. (opens in a new tab)

  6. Iron oxide amended biosand filters for virus removal

    … of the experiment (287 days), while BSF with steel wool removed >4-log10 MS2 for the first 160 days. Plug flow for the BSF was shown to depend on uniformity between the iron oxide material and sand media grains. The results suggest that the duration of effective virus removal by iron-amended …

    uiuc Repository record for Iron oxide amended biosand filters for virus removal (opens in a new tab)

  7. Poly(3,4-epoxycyclohexylmethyl acrylate) Synthesis and Use in the Preparation of an Exceptionally Hard Organic Polymer Coating

    … on the coating after 250 abrasion cycles with steel wool under a pressure of 13 kPa. In contrast, both PET and PS exhibit significant wear tracks after just one abrasion cycle. The coating also demonstrates high transparency, with a transmittance of 97% at 500 nm for a 50 µm thick film, after …

    queens Repository record for Poly(3,4-epoxycyclohexylmethyl acrylate) Synthesis and Use in the Preparation of an Exceptionally Hard Organic Polymer Coating (opens in a new tab)

  8. Obtenção e caracterização de um compósito de matriz polimérica com carga de palha de aço

    … perspective we studied the feasibility of using steel wool for obtaining a polymeric matrix composite. Three formulations were tested, 10%, 15% and 20% of composite fibers. For the characterization of the composite were determined thermal properties (conductivity, heat capacity, diffusivity and …

    brazil-ufrn Repository record for Obtenção e caracterização de um compósito de matriz polimérica com carga de palha de aço (opens in a new tab)

  9. Enhancing membrane filtration and persulphate advanced oxidation processes for water treatment

    … iron nanoparticles, commercially available steel wool and iron powder or waste heat. An in-depth investigation of the practical and potential benefits of nanotechnology to membrane development was presented as well as a critical review of the literature of AOPs focused on persulphate with …

    vu-aus Download PDF for Enhancing membrane filtration and persulphate advanced oxidation processes for water treatment (opens in a new tab)

  10. Prototype Design for Thermoacoustic Flashover Detector

    … of 225 degrees Celsius across a 2 cm long porous steel wool stack. The temperatures at the hot and cold ends of the stack are 300 and 150 degrees Celsius respectively, which is achieved with a response time of ~100 seconds. The sound is sustained as long as there is a minimum power input of 31 …

    maryland Repository record for Prototype Design for Thermoacoustic Flashover Detector (opens in a new tab)

  11. Development of Non-conventional Iron-based Nanomaterials for Water Treatment

    … including the integration of stainless-steel wool around permanent magnets, hydraulic flow conditions, and magnetic nanoparticle uptake. The MagNERD efficiently removes high concentrations (500 ppm) of magnetic nanopowder (e.g., >95% removal) under scalable and process-relevant flow …

    rice Repository record for Development of Non-conventional Iron-based Nanomaterials for Water Treatment (opens in a new tab)

  12. Investigation of the Effects of Biofouling on the Hydraulic Properties of Wells in Fractured Bedrock Aquifers

    … grown in the well by the addition of nutrients (steel wool, Difco beef peptone and gelatin). The wells located in Portland and Cambridge are more than 10 years old and were already biofouled. In each case, the well was hydraulically tested using open- well pumping methods and via slug testing …

    queens Repository record for Investigation of the Effects of Biofouling on the Hydraulic Properties of Wells in Fractured Bedrock Aquifers (opens in a new tab)

  13. INTEGRATED COMPUTATIONAL AND EXPERIMENTAL EVALUATION OF ELECTROMAGNETIC ENERGY-INDUCED SELF-HEALING PERFORMANCE OF ASPHALT COMPOSITES

    … and modified asphalt mixture samples, including steel wool, carbon fiber, graphite flake and exfoliated graphite nanoplatelets (xGNP). Some relative asphalt binder tests were conducted to evaluate the performance of modified asphalt, including rotational viscosity, light absorbance, aging and …

    mtu Repository record for INTEGRATED COMPUTATIONAL AND EXPERIMENTAL EVALUATION OF ELECTROMAGNETIC ENERGY-INDUCED SELF-HEALING PERFORMANCE OF ASPHALT COMPOSITES (opens in a new tab)

  14. Transparent Omniphobic Coatings that are Flexible and Wear Resistant

    … into a U-shape 500 times or is abraded with steel wool. While the reported coatings have various applications, the insight gained from the research will also facilitate the design of other analogous materials. This thesis also reports the preparation of such a flexible hard omniphobic coating …

    queens Repository record for Transparent Omniphobic Coatings that are Flexible and Wear Resistant (opens in a new tab)

  15. Approaches for Noble Gas Isotope Application in Rock Porewater Studies

    … built to explore an iterative polished stainless steel wool trapping method to separate Kr from Ar. The iterative trapping method yields > 95% trapping efficiency for Kr and > 99% trapping efficiency for Xe. Simultaneously, comparable and steady noble gas sensitivities and noble gas isotope ratios …

    ottawa-retro Repository record for Approaches for Noble Gas Isotope Application in Rock Porewater Studies (opens in a new tab)

  16. Fracture Characterizations of Multi-Scale Fiber Cementitious Composites

    … the toughening mechanisms of multi-scale steel fiber reinforcement within the fracture process zone (FPZ) of high-strength cementitious composites. While research on multi-scale reinforcement in cementitious materials is limited, its use in concrete has shown clear benefits, including …

    buffalo Repository record for Fracture Characterizations of Multi-Scale Fiber Cementitious Composites (opens in a new tab)

  17. Evaluation of a Novel β-cyclodextrin Functionalized Nano Adsorbent for Removal of Pharmaceuticals

    … capture and recovery efficiency. A multi-layer steel wool placement provided 98% capture efficiency when compared to a typical placement that yielded 30% capture efficiency. It was also found that flow velocity was the significant factor impacting the capture and recovery of the adsorbent. …

    waterloo Repository record for Evaluation of a Novel β-cyclodextrin Functionalized Nano Adsorbent for Removal of Pharmaceuticals (opens in a new tab)