Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 198 for “"Steel bars"”.

  1. Splice tests of plain steel bars in concrete

    Fifteen splice specimens reinforced with plain steel bars, including three specimens instrumented with both steel and concrete strain gauges, were tested under monotonically applied four-point loading to develop a database of reliable bond test results and contribute to the development of a …

    sask Repository record for Splice tests of plain steel bars in concrete (opens in a new tab)

  2. Setting bar-bending requirements for high-strength steel bars

    The reinforcing steel industry is currently developing high-strength reinforcing bars with specified yield strengths of 80 and 100 ksi, due to increased demand for such grades in concrete construction. However, none of the higher steel grades are able to match the benchmark mechanical properties of …

    texas Repository record for Setting bar-bending requirements for high-strength steel bars (opens in a new tab)

  3. Reinforced Concrete Coupling Beams with High-Strength Steel Bars

    The use of high-strength steel bars in reinforced concrete coupling beams has the potential to reduce reinforcement congestion and support more efficient design and construction methods. A series of tests was conducted to investigate the effects of high-strength reinforcement on coupling beam …

    ku Repository record for Reinforced Concrete Coupling Beams with High-Strength Steel Bars (opens in a new tab)

  4. Creep-Fatigue Interaction of Notched 304 Stainless Steel Bars

    Circular-notched and sharp-notched 304 stainless steel specimens were subjected to constant load creep, cyclic loading with hold-time and fatigue loadings at 650(DEGREES)C to determine the lives, failure modes and to understand creep-fatigue interaction mechanisms. The hold-times are one minute and …

    uiuc Repository record for Creep-Fatigue Interaction of Notched 304 Stainless Steel Bars (opens in a new tab)

  5. Bond and slip of steel bars in frozen sand

    Thesis (Ph. D.)--Michigan State University. Department of Civil and Sanitary Engineering, 1983

    msu Repository record for Bond and slip of steel bars in frozen sand (opens in a new tab)

  6. Modeling strain demands in longitudinal steel bars of concrete columns

    Fracture of longitudinal bars, due to high-strain low-cycle fatigue, is a common failure mode in seismically detailed reinforced concrete columns. The issue has recently attracted increased scrutiny due the national push to introduce high-strength reinforcing bars with yield strengths exceeding 80 …

    texas Repository record for Modeling strain demands in longitudinal steel bars of concrete columns (opens in a new tab)

  7. The mechanical properties of reinforcing steel bars at low temperature.

    The mechanical properties of four reinforcing steel bars were evaluated in the temperature range from -40°C (-40°F) to 40°C (104°F). The steel bars were: #9G60 (sigmays = 60 ksi), #9G40 (sigma ys = 40 ksi), #6G60 (sigmays = 60 ksi), and #6G40 (sigma ys = 40 ksi). Both tension and …

    ottawa-retro Repository record for The mechanical properties of reinforcing steel bars at low temperature. (opens in a new tab)

  8. Diagonally-Reinforced Concrete Coupling Beams with High-Strength Steel Bars

    The use of high-strength steel in diagonally reinforced coupling beams was investigated with the aims of minimizing reinforcement congestion and increasing the maximum permissible design shear stress without compromising behavior under large displacement reversals. Five large-scale diagonally …

    ku Repository record for Diagonally-Reinforced Concrete Coupling Beams with High-Strength Steel Bars (opens in a new tab)

  9. CFRP strengthening of RC beams with corroded lap spliced steel bars

    … in lieu of traditional repair techniques such as steel plates bonding. FRPs are used because of their light weight, ease of application, non-corrosiveness material, and high strength. The current study comprised of testing eighteen reinforced concrete beams to investigate the confinement provided …

    waterloo Repository record for CFRP strengthening of RC beams with corroded lap spliced steel bars (opens in a new tab)

  10. Behaviour of continuous concrete beams reinforced with hybrid GFRP/steel bars

    … hybrid glass fibre reinforced polymer (GFRP) and steel bars bars as longitudinal reinforcement for simple and continuous concrete beams is presented. Three simply and eleven multi-spans continuous reinforced concrete beams were constructed and tested to failure. Nine continuous and two simply …

    bradford Repository record for Behaviour of continuous concrete beams reinforced with hybrid GFRP/steel bars (opens in a new tab)

  11. MECHANICALLY-SPLICED HIGH-STRENGTH STEEL BARS IN EARTHQUAKE-RESISTANT RECTANGULAR WALLS

    … splices with Grade 100 (690) longitudinal bars in regions where yielding is expected. These tests were undertaken because ACI 318-19 prohibits both lap and mechanical splices for Grade 100 (690) bars in special structural walls where longitudinal reinforcement yielding is likely. The …

    ku Repository record for MECHANICALLY-SPLICED HIGH-STRENGTH STEEL BARS IN EARTHQUAKE-RESISTANT RECTANGULAR WALLS (opens in a new tab)

  12. HIGH-STRENGTH STEEL BARS IN EARTHQUAKE-RESISTANT T-SHAPED CONCRETE WALLS

    … the influence of selected reinforcing steel mechanical properties on wall deformation capacity. Four large-scale T-shaped reinforced concrete wall specimens with different types of reinforcement were subjected to reversed cyclic displacements. The primary variables were the yield …

    ku Repository record for HIGH-STRENGTH STEEL BARS IN EARTHQUAKE-RESISTANT T-SHAPED CONCRETE WALLS (opens in a new tab)

  13. Defining structurally acceptable properties of high-strength steel bars through material testing

    … fatigue tests were performed on reinforcing bars in order to assess the acceptability of newly developed high-strength reinforcing bars in seismic applications. The steels tested are classified as grade 60 A706, grade 80 A706, grade 80 A615, and grade 100. The high-strength reinforcing bars …

    texas Repository record for Defining structurally acceptable properties of high-strength steel bars through material testing (opens in a new tab)

  14. Heat transfer and stress generation during forced convective quenching of steel bars

    … forced convective quenching of alloyed eutectoid steel bars has been studied within the framework of microstructural engineering. The proprietary process is used to produce grinding rods with improved abrasion resistance and toughness. Mathematical models of heat transfer, microstructural …

    ubc Repository record for Heat transfer and stress generation during forced convective quenching of steel bars (opens in a new tab) Download PDF for Heat transfer and stress generation during forced convective quenching of steel bars (opens in a new tab)

  15. Behaviour of continuous concrete T-beams reinforced with hybrid FRP/Steel bars

    … with glass fibre reinforced polymer (GFRP) bars while the other five beams were reinforced with a different combination of GFRP and steel bars. The ratio of GFRP to steel reinforcement at both mid-span and middle-support sections was the main parameter investigated. The results showed that …

    bradford Repository record for Behaviour of continuous concrete T-beams reinforced with hybrid FRP/Steel bars (opens in a new tab)

  16. Bond Behaviour between Reinforcing Steel Bars and Fly ash-based Geopolymer Concrete

    … bond between the concrete and the reinforcing bars. Before being utilised in any concrete structures, GPC must demonstrate that it possesses adequate bond strength and predictable bond behaviour with commercial steel reinforcements. Although the importance of investigating the bond …

    unsw Repository record for Bond Behaviour between Reinforcing Steel Bars and Fly ash-based Geopolymer Concrete (opens in a new tab)

  17. Corrosion performance of coated steel bars in cracked and uncracked reinforced concrete beams

    Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2027-12-01

    uiuc Repository record for Corrosion performance of coated steel bars in cracked and uncracked reinforced concrete beams (opens in a new tab)

  18. Bond and ductility of concrete reinforced with various steel bars surface and ductility conditions

    … consists of two main materials: reinforcing steel and concrete, each of those two materials has its own effect on the performance of the structure. In this thesis, the change in RC performance due to different steel properties and specifications will be investigated. The study focuses on the …

    birmingham Download PDF for Bond and ductility of concrete reinforced with various steel bars surface and ductility conditions (opens in a new tab)

Page 1 of 10