Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"Steel braced frames"”.

  1. Redundancy in Steel Braced Frames Under Seismic Excitations

    … derived and determined for all of the calculated braced frames. The new redundancy factors are compared with the redundancy factors currently required by code. Fragility curves are also calculated for each building. Conclusions are drawn in order to contribute to future structural design.

    uiuc Repository record for Redundancy in Steel Braced Frames Under Seismic Excitations (opens in a new tab)

  2. Ultimate Limit States in Controlled Rocking Steel Braced Frames

    … in seismically active areas, controlled rocking steel braced frames have been developed as a seismically resilient low-damage lateral-force resisting system. Controlled rocking steel braced frames (CRSBFs) mitigate structural damage during earthquakes through a controlled rocking mechanism, where …

    mcmaster Repository record for Ultimate Limit States in Controlled Rocking Steel Braced Frames (opens in a new tab)

  3. NONSTRUCTURAL COMPONENT DEMANDS IN BUILDINGS WITH CONTROLLED ROCKING STEEL BRACED FRAMES

    Controlled Rocking Steel Braced Frames (CRSBFs) have been developed as a high-performance structural solution to resist seismic forces, due to their ability to minimize structural damage and self-centre the structure back to its original position after an earthquake. A CRSBF is intentionally …

    mcmaster Repository record for NONSTRUCTURAL COMPONENT DEMANDS IN BUILDINGS WITH CONTROLLED ROCKING STEEL BRACED FRAMES (opens in a new tab)

  4. Performance Evaluation of Cold -Formed Steel Braced Frames for Seismic Loads

    A series of 2-, 4- and 6-story buildings were designed and evaluated using the proposed method. It was found that 4- and 6-story buildings design and configured based on current provisions using an R factor of 4 did not satisfy the design objective. This resulted mainly from excessive drift demands …

    uiuc Repository record for Performance Evaluation of Cold -Formed Steel Braced Frames for Seismic Loads (opens in a new tab)

  5. Inelastic behavior and seismic collapse prevention performance of low-ductility steel braced frames

    … the analogous requirements for low-ductility steel SFRSs are minimal, and in some instances nonexistent. Ordinary concentrically-braced frames (OCBFs) have requirements that are intended to provide a small level of ductility, and steel SFRSs designed with a response modification factor R = 3 …

    uiuc Repository record for Inelastic behavior and seismic collapse prevention performance of low-ductility steel braced frames (opens in a new tab)

  6. Design of self-centering rocking steel braced frames : an engineering demand trade-off approach considering enhanced performance

    Self-centering rocking braced frames have gained attention as an innovative seismic-resistant structural system due to its promising performance resulting in limited structural damage and recentering capabilities. While most rocking braced frame systems rely on rocking about their base only, recent …

    texas Repository record for Design of self-centering rocking steel braced frames : an engineering demand trade-off approach considering enhanced performance (opens in a new tab)

  7. Design of Controlled Rocking Heavy Timber Walls For Low-To-Moderate Seismic Hazard Regions

    … on a similar methodology for controlled rocking steel braced frames. The design process includes a new proposal to minimize the design forces while still controlling peak drifts, and it also includes a new proposal for predicting the influence of the higher modes by referring to previous research …

    mcmaster Repository record for Design of Controlled Rocking Heavy Timber Walls For Low-To-Moderate Seismic Hazard Regions (opens in a new tab)

  8. Performance of Steel Braced Frame Reinforced with Shape Memory Alloy Wires

    … on the research performed on concentrically braced steel frames reinforced with nickel-titanium (NiTi) shape memory alloy (SMA) wires for use as a seismic resistance force system. The main objective of this research was to design an innovative self-centring system that had the ability to …

    calgary Repository record for Performance of Steel Braced Frame Reinforced with Shape Memory Alloy Wires (opens in a new tab)

  9. Studies on the Design and Behavior of Strongback Braced Frames

    … strong earthquake ground motions, conventional steel braced frames are vulnerable to soft-story mechanisms, whereby the weakest story accumulates more damage relative to the rest of the structure. This reduces the overall strength of the structure and increases the cost of repairs.</p> <p>One …

    utk-theses Repository record for Studies on the Design and Behavior of Strongback Braced Frames (opens in a new tab)

  10. Capacity design methods for strongback braced frames

    … strong earthquake ground motions, conventional steel braced frames are vulnerable to soft-story mechanisms, whereby the weakest story accumulates more damage relative to the rest of the structure. This reduces the overall strength of the structure, increases the cost of repairs, and can cause …

    ut-knoxville Repository record for Capacity design methods for strongback braced frames (opens in a new tab)

  11. Seismic performance of buildings with permanent lateral demands

    … demands, and investigated the behaviour of steel-braced frame buildings. The results demonstrate that a seismic ratcheting effect can develop and amplify inelastic deformation demands. The extent of ratcheting increases with the permanent lateral demands and is also highly dependent upon the …

    ubc Repository record for Seismic performance of buildings with permanent lateral demands (opens in a new tab) Download PDF for Seismic performance of buildings with permanent lateral demands (opens in a new tab)

  12. The Effects of Ground Motions Characteristics and Higher Modes on the Seismic Response of Steel Strongback Braced Frame Buildings

    … response that characterize traditional steel braced frames under seismic excitations, researchers proposed the Strongback Braced Frame (SBF) system, which is composed of a primary ductile system and an elastic vertical truss (strongback, SB). Although this system is not new, a …

    concordia Download PDF for The Effects of Ground Motions Characteristics and Higher Modes on the Seismic Response of Steel Strongback Braced Frame Buildings (opens in a new tab)

  13. Πειραματική διερεύνηση της συμπεριφοράς πλαισίων οπλισμένου σκυροδέματος ενισχυμένων με χαλύβδινους συνδέσμους υψηλής απόσβεσης

    … strengthening type which utilizes a small steel link element connected to the RC frame through bracing elements. The geometry of the frames is exactly the same in all the tested specimens but with two different reinforced arrangements. The bracing system is composed by two diagonal steel …

    greece Repository record for Πειραματική διερεύνηση της συμπεριφοράς πλαισίων οπλισμένου σκυροδέματος ενισχυμένων με χαλύβδινους συνδέσμους υψηλής απόσβεσης (opens in a new tab)