Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 154 for “"Steel substrates"”.
-
Characterization of tantalum coatings on steel substrates
Sputtered tantalum can be used as an effective corrosion resistant barrier if the coating is continuous, free from defects and is adherent to the substrate it is intended to protect. For corrosion-applications 100% bcc phase tantalum is preferred. X-ray diffraction results indicate that sputtered …
-
An investigation of diamond thin film deposition on steel substrates
… of the possibility of diamond deposition on steel substrates for low friction and low wear applications. Materials such as tungsten carbide are commercially available as diamond coated tools, where the diamond coating greatly extends the tool lifetime and performance. The diamond deposition …
-
Novel aluminium alloys for thermal spray applications to steel substrates.
… and Al-3wt%Ti-0.15wt%C coatings to protect steel structures from corrosion and wear.The accelerated and electrochemical tests conducted on Al-5wt% Zn-(0.02-0.05wt%) In showed that its superior corrosion performance was attributed to the synergetic interaction of Zn and In. Cyclic formation …
-
Deposition of diamond films on steel substrates for tribiological applications
Contains fulltext : 53731_depoofdif.pdf (Publisher’s version ) (Open Access) Contains fulltext : 72152.pdf (Publisher’s version ) (Open Access)
-
Determination of phase composition of sputtered tantalum on steel substrates by resistivity measurements
… alpha and beta phases of tantalum films on steel substrates, using the four-point probe resistivity measurements. While there is a large difference between resistivities of the two Ta phases, the problem is challenging because the measurements are influenced by the low resistivity of steel. …
-
Investigation of Laser-Based Surface Coating/Alloying of Steel Substrates Using Hard Carbides
… is to investigate the coating/alloying of steel surfaces with a hard carbide to improve hardness and wear resistance, with application to metal forming dies. A laser-based additive manufacturing approach, viz., a derivative of selective laser melting (SLM) was used to bond WC-17Co powder on …
-
Tribology and Micro-Chemistry of Sputter Deposited Composite Coatings on Honed Steel Substrates
… composite coatings on chemically honed steel substrates has been investigated. The primary wear resistant coatings (TiC) were deposited by rf sputtering using a dc substrate bias and the solid lubricant coatings (TiO(,2)) were deposited in an Ar and O(,2) mixed rf glow discharge. …
-
Influence of pretreatment on corrosion behaviour of duplex zinc/polymer coatings on steel substrates
… corrosion resistance of duplex-zinc coatings on steel substrates.Premature failure of these systems has been attributed to the presence of defects such as craters and pinholes in the polymer film and debonding of the polymer film from the zinc substrate.Defects found on commercially produced …
-
Synthesis and Study of Stimuli-Responsive Fluorescent Polymeric Thin Films for Early Corrosion Detection by Directly Monitoring Iron Dissolution from Steel Substrates
… for evaluation and screening of coated substrates for early detection of corrosion in advance of serious metal visual and/or physical damage. The use of various environmentally sensitive fluorescent molecules doped in thermoplastic polyepoxides for detecting water, chloride ions, metal …
-
Synthesis of calcium hydroxyapatite thin films on the stainless steel substrates and investigation of the influence of substrates surface modification on the quality of coatings /
… thin films on variously modified 316L stainless steel substrates and investigate different properties of obtained coatings in order to use the calcium hydroxyapatite coated stainless steel for manufacture of permanent implants. Environment friendly aqueous sol-gel method was developed for the …
-
Functional coatings for marine applications
… of metal matrix composite coatings deposited on steel substrates for marine applications.
-
Crystallographic structure and mechanical properties of tantalum coatings on steel deposited by DC magnetron sputtering
… coatings are investigated for protection of steel surface exposed to mechanical stresses, high temperature, and corrosive environment. Such conditions exist inside large army gun barrels. The goal of this work was to contribute to the development of technology for tantalum coating of steel, …
-
Improving Tribological Properties of Polydopamine/Polytetrafluoroethylene Coatings Through Incorporating Core-shell Nanoparticles and Laser Surface Texturing
… to increase PTFE coating adhesion to stainless steel substrates and the resulting coating was labeled as PDA/PTFE. To prolong the wear life of PDA/PTFE coatings on stainless steel substrates, the coating cohesion and adhesion was improved by incorporating three different low concentration of …
-
Understanding the Formation Mechanism of Plasma-sprayed Ni and Ni20Cr Splats through Experimental and Numerical Study
… characterisation of Ni splats on stainless steel substrates, splat overspreading and fragmentation were closely correlated with the presence of a large proportion of moisture on the substrate surface. For regularshaped splats (finger splashing or perfect disk), a numerical simulation was …
-
Studies Directed to the Development of Long Lived Palladium Membranes for Hydrogen Purification
… alloy membranes on a known porous stainless steel substrate, and apply the results to a new and novel porous stainless steel substrate. Different oxide pore and surface treatments were studied. The effect of silica as a diffusion barrier, surface pore modifier, and palladium nucleation site …
-
Studies Directed to the Development of Long Lived Palladium Membranes for Hydrogen Purification
… alloy membranes on a known porous stainless steel substrate, and apply the results to a new and novel porous stainless steel substrate. Different oxide pore and surface treatments were studied. The effect of silica as a diffusion barrier, surface pore modifier, and palladium nucleation site …
-
Physical properties of thin film, metastable titanium(0.5)aluminum(0.5)nitrogen alloys deposited by reactive magnetron sputtering
… $\mu$m thick, have been deposited on stainless-steel substrates by d.c. reactive magnetron sputtering. The effects of low-energy (E $\leq$ 250 eV) ion bombardment during deposition on thin film microstructure, oxidation properties, and optical reflectance of the metastable alloy were evaluated.
-
Micro-cold spray of yttria films onto conformal surfaces
… with a wide range of materials as powders and substrates. One particularly unique feature of the MCS process is its ability to be used to deposit dense ceramic materials without the need for high temperatures or binder materials. Experiments were conducted to find the most effective process gas …
Page 1 of 8