Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 58 for “"Steel--Testing"”.
-
A Shear Bondstrength Evaluation of Five Orthodontic Light-Cured Adhesives
… were individually bonded to knurled stainless steel testing rings via the respective adhesives. Each bracket was sheared from the testing ring using an Instron machine. For each adhesive a 2, 5, 10, and 20 second cure-time, and an immediate, 5 minute, 20 minute, and 24 hour shear test time was …
-
Roles of surface finish and hydrogen availability on the tensile properties of 1018 steel in hydrogen environments
… tensile tests were performed on AISI 1018 steel specimens. Tests were conducted both in air and while the specimens were undergoing electrolytic hydrogen charging. Specimens with three different surface finishes were tested at various cathodic charging current densities. The tensile …
-
A study of the effect of the reversal of stress on different sized fillets
Thesis (B.S.)--Michigan Agricultural College, 1916
-
A study of the growth of a 0.20 carbon chrome nickel steel ring gear upon heat treatment
Thesis (B.S.)--Michigan Agricultural College, 1920
-
The static bending machine and its use in the determination of the effect of combined stresses in steel
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1916
-
A study of the contraction & expansion of carbon steels
Thesis (B.S.)--Michigan Agricultural College, 1920
-
An investigation of the needle like structure in high speed steel
Thesis--Michigan State College of Agriculture and Applied Science, 1927
-
General survey of the utility of the spark test as applied to commercial steels
Thesis ()--Michigan State College of Agriculture and Applied Science, 1933
-
A study of the causes of variation in the physical properties of carbon steels for crankshafts
Thesis (M.S.)--Michigan State College of Agriculture and Applied Science, 1932
-
The fatigue-crack growth and fracture characteristics of a precipitation-hardened semiaustenitic stainless steel
… data on PH15-7Mo (TH 1050) stainless steel are presented in this thesis. In addition, the capability of McEvily and Illg's crack-growth analysis and Kuhn and Figge's residual strength analysis to correlate the test data has been investigated. Axial-load fatigue-crack propagation (at R …
-
Assessing tube tensile properties for predicting performance during hydroforming
Includes bibliographical references (pages 94-99).
-
Bending analysis of oval tubes and optimization of boost system in rotary draw bender for hydroforming applications
Includes bibliographical references (pages 162-165).
-
An investigation of effect of grain size on deep drawing
Thesis (M.S.)--Michigan State College of Agriculture and Applied Science, 1930
-
Phosphorus in iron-based lunar in-situ resource utilization (ISRU) alloys
… This dissertation examines iron-based alloys (steels) produced by hydrogen reduction of lunar regolith simulants, including testing of the first publicly demonstrated consolidated metal produced from regolith or simulants. Phosphorus was found to be a major contaminant within the hydrogen …
-
Desenvolvimento de equipamento laboratorial para estudo da resposta do solo de aterro de encontros de pontes integrais sujeitos a movimentos laterais cíclicos
… lateral displacements. The equipment included, a steel testing box capable of containing a maximum volume of soil with dimensions of 300 x 300 x 350 mm. The box is instrumented with pressure and displacement transducers, connected to a low-cost data acquisition system developed with open-source …
-
A study of some features of the fully stressed design algorithm
… stressed design (FSD) of rigidly convected plane steel frames. The objective is to: (1) formulate the FSD algorithm consistent with the most recent AISC Manual of Steel Construction, (2) study the effect of some of the features of FSD on the final design, and (3) compare final designs with …
-
A physical and micrographical study of carbon steels
Thesis (B.S.)--Michigan Agricultural College, 1921
-
The effects of nitrogen concentration between 0.27 per cent and 1.30 per cent on internal friction peaks in 304L stainless steel
… on the internal friction peaks in 304L stainless steel. The amplitude of the internal friction peak associated with the stress-induced diffusion of interstitial nitrogen increased as a linear function of the nitrogen content. The activation energy of diffusion was found to decrease with an …
-
The effect of actual and inherent austenite grain size on impact properties of medium carbon steels
Thesis (Ph. D.)--Michigan State University. Department of Metallurgy, Mechanics, and Materials Science, 1975
Page 1 of 3