Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2254 for “"Steels"”.
-
Hydrogen effects on austenitic stainless steels and high-strength carbon steels
… on hydrogen effects on two classes of steels - austenitic stainless steels and advanced high-strength carbon steels. Hydrogen solubility and diffusion in metastable austenitic stainless steels are studied with thermal desorption spectroscopy (TDS). This method, together with the …
-
Experimental Investigation on Inclusions in Medium Manganese Steels and High Manganese Steels
… detected inclusions in medium and high manganese steels were Al2O3(pure), Al2O3-MnS, AlN(pure), AlN-MnS, AlON, AlON-MnS, and MnS inclusions. As the manganese content in the steel increased from 2% to 20%, the total amount of inclusions, especially AlN-contained inclusions, was raised. This …
-
Tribo-Oxidation of Steels
The present study is concerned with the oxidational wear of EN8 low alloy steel under unlubricated, unidirectional sliding conditions. Wear tests were conducted at various loads and sliding speeds using a pin on disc wear machine in which wear rate, frictional force and pin and disc temperatures …
-
Hot ductility of steels
… temperatures. Reheating the C-Mn-Al low S level steels after casting can be beneficial to the hot ductility as a result of refining the grain size. For C-Mn-Nb-Al and C-Mn-Al high S level steels reheating causes the precipitation of NbCN and FeMnS in the latter, which are finer and have a closer …
-
Hot ductility of steels
… hot tensile test has been used for a variety of steels, to investigate the influence of such factors as inclusions, precipitation, phase transformation and grain size on hot ductility. Tests were performed in the temperature range 700-1000 °C and at a strain .4 _2 1 rates of (10 —10 S ), …
-
Machinability of bainitic steels
… energy has ignited an interest in bainitic steels. These steels can attain their required properties through controlled cooling and thereby avoid energy intensive heat treatments. However, their machining behaviour remains less understood than their mechanical performance. This work …
-
Machinability of bainitic steels
… more efficient and lightweight designs. Bainitic steels are a class of materials that could meet these requirements. They offer superior mechanical properties compared to traditionally used steels with a pearlitic-ferritic microstructure, allowing for the design and production of smaller and …
-
High speed tool steels
Open Restriction set for Item 97489 on 2017-01-24T22:17:35Z with date null by kappleg2@illinois.edu.
-
Deformation behaviour and martensitic transformations in metastable austenitic steels and low alloyed multiphase steels
Es wurden die Mikrostruktur und die mechanischen Eigenschaften bedingt durch dehnungsinduzierte Martensitbildung im metastabilen austenitischen Stahl X5CrNi18.10 und in einem niedrig legierten Mn-Si-Al Stahl untersucht. Dazu wurden Zugversuche bei verschiedenen Temperaturen durchgeführt. Für den …
-
Fatigue Study of Pipeline Steels
<p>Two types of pipeline steels, Alloy B [Fe-0.05C-1.52Mn-0.12Si-0.092Nb, weight percent (wt.%)] and Alloy C [Fe-0.04C-1.61Mn-0.14Si-0.096Nb, wt.%)], were tested. Vickers hardness and nanoindentation tests were used to obtain the hardness and elastic modulus. Compact-tension (CT) specimens were …
-
Sliding wear of nitrided steels
… ferritic nitrocarburized BS970,905M39 (EN41B) steels was investigated systematically from an engineering point of view. Commercial nitriding processes were employed, and the wear studies were carried out using a pin-on-disc machine over a wide range of sliding speeds and applied loads. The worn …
-
Corrosion Resistance of Weathering Steels
… discussions demonstrate that uncoated weathering steels should not be exposed in the following conditions: marine or heavily industrial environment, high rainfall or humidity conditions, sheltered conditions, and some other bad design conditions. Therefore, for proper bridge design, the …
-
Pitting fatigue of carburized steels
Includes bibliographical references (pages 101-103).
-
Formability of austenitic stainless steels
Includes bibliographical references (pages 170-176).
-
Fatigue of microalloyed bar steels
Includes bibliographical references (pages 119-123).
-
The hot ductility of steels
… on a variety of plain carbon and micro-alloyed steels, in order to determine the influence of such factors as phase transformation, grain size and precipitation on hot ductility. The γ-∝ phase transformation has been shown to produce a significant ductility trough in the high temperature tensile …
-
Hot ductility of TWIP steels
… fraction in deep drawn products. However these steels are difficult to continuous cast and cracking can occur at the slab surface. Therefore it becomes very important to gain an understanding of the cause of this cracking, in order to prevent their occurrence. To assess the likelihood of the …
-
Machinability of 100Cr6 bearing steels
… performance when machining different batches of steels. However, the detailed material analysis showed chemical differences between the batches in terms of calcium and sulphur content, with corresponding differences in the non-metallic inclusion (NMI) content and type. Differences in tool wear …
-
Thermochemical treatment of bearing steels
Bearings are applied to provide frictionless movements and to withstand the applied load. The critical part of the bearings is the surface which determines the bearing life. The surface mechanical properties like hardness and microstructural features play a major role in that. These surface …
Page 1 of 113