Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"Step-up converter"”.

  1. Step-Up Converter Interfaces for Magnetron Power Supply

    … microwave energy requires a high-voltage gain converter. In this thesis, a DC/DC converter is proposed to supply the two voltages required by a magnetron by utilizing dual resonant circuit modules. By combining the switches of the step-up resonant stage with a bridgeless power factor correction …

    york Repository record for Step-Up Converter Interfaces for Magnetron Power Supply (opens in a new tab)

  2. A Soft Switched, Single-Switch Electrolytic Capacitor-less Step-Up Converter for Photovoltaic Energy Application

    … electrolytic capacitor-less quasi-resonant step-up DC/DC converter is proposed for solar energy applications. The proposed converter is an improved coupled-magnetic based topology that requires only a single switch. By operating the input inductor of the proposed converter in continuous …

    york Repository record for A Soft Switched, Single-Switch Electrolytic Capacitor-less Step-Up Converter for Photovoltaic Energy Application (opens in a new tab)

  3. Modular Photovoltaic (PV) Step-up Converter With A Coupled Power Balancing Scheme for DC-Distributed System

    … to the MVDC grid, modular structure of PV power converter is used to convert and maximize the capture of PV energy. The converter consists of external power balancing units to ensure equal power distribution and safe operation amongst all the converter modules. Developing highly power-efficient …

    york Repository record for Modular Photovoltaic (PV) Step-up Converter With A Coupled Power Balancing Scheme for DC-Distributed System (opens in a new tab)

  4. Design of a high switching frequency interleaved step-up converter with digital interface for Power Factor Correction applications

    … rectifying AC to drive a DC load. A two channel step-up converter with correctly controlled switches can be used as a PFC. High frequency switching gives the advantage of physically small boost stage inductors and filters. The purpose of this thesis was to investigate the possibilities of …

    chalmers Repository record for Design of a high switching frequency interleaved step-up converter with digital interface for Power Factor Correction applications (opens in a new tab)

  5. Design of Monolithic Step-Up DC-DC Converters with On-Chip Inductors

    This thesis presents the design of a step-up DC-DC converter with on-chip coupled inductors. Circuit theory of DC-DC converters in general is presented, after which a mathematical model of a step up converter is developed. A circuit implementation optimized from results of the mathematical model …

    guelph Repository record for Design of Monolithic Step-Up DC-DC Converters with On-Chip Inductors (opens in a new tab)

  6. Modeling and design of a current mode control boost converter

    The boost or step up converter produces an undesirable Right-Half Plane Zero (RHPZ) in the small signal analysis of the "Duty Cycle Control to Output Voltage" transfer function. It is well documented that the boost converter has the reputation of low-performance and stability is complicated due to …

    colostate Repository record for Modeling and design of a current mode control boost converter (opens in a new tab)

  7. Research on power supplies for oled lamps based on switched capacitor conventers

    … an analysis of different switched-capacitor (SC) converters topologies, to drive OLED lamps is presented. These converters are selected because of their great advantages as to high power density and owing to the fact that they are light, small and cheaper in comparison with other solutions, as …

    oviedo Repository record for Research on power supplies for oled lamps based on switched capacitor conventers (opens in a new tab)

  8. Design, Simulation and Implementation of a High Step-up Z-source DC-DC Converter with Flyback and Voltage Multiplier

    … the output voltage of PV cells is low, a high step-up dc-dc converter is needed to increase this low voltage to meet inverter input required voltage. In this thesis, a novel high step-up dc-dc converter (which is the derivation of z-source converter) is introduced. This converter has a higher …

    tamu Repository record for Design, Simulation and Implementation of a High Step-up Z-source DC-DC Converter with Flyback and Voltage Multiplier (opens in a new tab)

  9. Approximate Dynamic Programming with Applications

    … law can be computed and how the resulting lookup table can be reduced efficiently.The on-line implementation of receding horizon controllers, even for linear systems, is usually restricted to systems with slow dynamics. One reason for this is that the delay between measurement and actuation …

    lund Repository record for Approximate Dynamic Programming with Applications (opens in a new tab) Download PDF for Approximate Dynamic Programming with Applications (opens in a new tab)

  10. Advanced topologies of high step-up DC-DC converters for renewable energy applications

    … developing several advanced topologies of high step-up DC-DC converters to connect low-voltage renewable energy (RE) sources, such as photovoltaic (PV) panels and fuel cells (FCs), into a high-voltage DC bus in renewable energy applications. The proposed converters are based on the combinations …

    must-thes Repository record for Advanced topologies of high step-up DC-DC converters for renewable energy applications (opens in a new tab)

  11. Battery-Free IoT Water Sensor Nodes: Design and Evaluation Across Different Radio Architectures

    … using only a brief energy burst generated upon leak detection. An RF-augmented variant integrates ambient RF harvesting to support periodic heartbeat pings, improving observability between leak events. To extend communication beyond localized zones, a LoRa-based design leverages a step-up …

    waterloo Repository record for Battery-Free IoT Water Sensor Nodes: Design and Evaluation Across Different Radio Architectures (opens in a new tab)

  12. Soft-Switched Step-Up Medium Voltage Power Converters

    … a heavy line-frequency transformer is used to step up the individual turbines output voltage to the MV level. To eliminate the need for bulky MVac transformers, researchers are gravitating towards the idea of replacing the MVac grid with a medium voltage dc (MVdc) grid, so that MV step-up …

    york Repository record for Soft-Switched Step-Up Medium Voltage Power Converters (opens in a new tab)

  13. Circuit Design and Modeling Techniques of On-chip Power Delivery Modules

    … Power delivery network consists of off-chip converters, wires/bumps to route power and ground signals from off-chip converters to inside the chip, on-chip converters, and on-chip power grid. Parasitic resistance and inductance of routing wires and package cause IR noise and resonant supply …

    umn Repository record for Circuit Design and Modeling Techniques of On-chip Power Delivery Modules (opens in a new tab)

  14. Two-Phase Boost Converter

    A boost converter is one of the most efficient techniques to step up DC input voltage to a higher needed DC output voltage. The boost converter has many possible applications, such as in a photovoltaic system, hybrid car and battery charger. The proposed prototype in this report is a proof of …

    calpoly Repository record for Two-Phase Boost Converter (opens in a new tab)

  15. Κυκλώματα και λογισμικό για μετατροπείς ΣΡ/ΣΡ με ημιαγωγούς καρβιδίου του πυριτίου για χρήση σε φωτοβολταϊκά συστήματα

    … and at 150 ° C. Additionally, a boost converter was designed for use in photovoltaic systems. The implementation was done by using Normally-on or Normally-off SiC JFET and the experimental measurements verified that its efficiency is extremely high, of the order of 99%. A new method of …

    greece Repository record for Κυκλώματα και λογισμικό για μετατροπείς ΣΡ/ΣΡ με ημιαγωγούς καρβιδίου του πυριτίου για χρήση σε φωτοβολταϊκά συστήματα (opens in a new tab)

  16. Miniaturized Power Electronic Interfaces for Ultra-compact Electromechanical Systems

    … losses. Two types of bridgeless resonant ac-dc converters are first introduced and developed to efficiently convert arbitrary input voltages into a regulated dc output voltage. The proposed topologies provide direct ac-dc power conversion with less number of components, in comparison to other …

    maryland Repository record for Miniaturized Power Electronic Interfaces for Ultra-compact Electromechanical Systems (opens in a new tab)

  17. Maximization of power generation from thermoelectric generators operating under constant heat flux

    … of the instantaneous open-circuit voltage. DC/DC converters are mainly used to operate TEGs at the MPP and Maximum Power Point Tracking (MPPT) techniques are used to operate the TEG at the MPP. Due to the difference in the location of the MPP between constant temperature gradient and constant …

    glasgow Repository record for Maximization of power generation from thermoelectric generators operating under constant heat flux (opens in a new tab) Download PDF for Maximization of power generation from thermoelectric generators operating under constant heat flux (opens in a new tab)

  18. New Topologies for High Voltage Gain DC-DC Power Electronic Converters – Theoretical Analysis and Experimental Validation

    … new high voltage gain DC-DC power electronic converters. The proposed converters in this dissertation are suitable candidates for connecting low voltage sources such as photovoltaic (PV) panels or fuel cell (FC) stacks to a DC microgrid or DC link of an inverter. The proposed converters …

    must-thes Repository record for New Topologies for High Voltage Gain DC-DC Power Electronic Converters – Theoretical Analysis and Experimental Validation (opens in a new tab)

  19. Miniaturní zvyšující DC/DC měnič s velkou účinností

    … 2 predstavuje DC/DC menič so širokým rozsahom vstupných napätí, s parametrami 9 – 32 V/19 V – 5 A určeným pre použitie v 12 – 24 V palubnej sieti, teda použiteľného v osobnom aj nákladnom automobile. Rovnako je možné menič používať v napájacej sieti malých osobných lietadiel prípadne v armádnych …

    brno-tech Repository record for Miniaturní zvyšující DC/DC měnič s velkou účinností (opens in a new tab)

  20. Rotoped pro nabíjení akumulátoru

    … jsou porovnány výrobky podobných vlastností dostupné na trhu.

    brno-tech Repository record for Rotoped pro nabíjení akumulátoru (opens in a new tab)

Page 1 of 2