Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"Stereo-PIV"”.
-
Uncertainty of Stereo PIV Calibration and Self-Calibration
Particle image velocimetry (PIV) is a widely used fluid measurement technique. Three dimensional PIV data or stereo PIV is acquired using two cameras. Stereo cameras are calibrated from camera coordinates, pixels, to real world units such as millimeters using calibration models. Stereo calibration …
-
Cross-plane stereo-PIV measurements of a turbulent boundary layer over highly irregular roughness
… complex roughness topography were explored with stereo particle-image velocimetry measurements in the wall-normal--spanwise plane. The roughness under consideration was replicated from a turbine blade damaged by deposition of foreign materials containing a broad range of topographical scales …
-
Best Practices for Volume Flow Rate Measurements Using PIV at the Exit of a Turbulent Planar Jet
Particle image velocimetry (PIV) is used to make volume-flow-rate measurements at the exit of a turbulent, planar nozzle. The objective of this report is to assess a range of data acquisition and processing parameters. Data is acquired for volume flow rates of Reynolds numbers between 10,000 and …
-
Development and Implementation of PIV Systems with Selective Particle Seeding For Production Wind Tunnel Testing
… of 2-D Particle Image Velocimetry (PIV), stereo-PIV, and selective seeding that enable application of PIV in large-scale, production-type wind tunnels. The PIV systems use conventional tools and methods to capture flow characteristics in the 7 foot x 10 foot test section of the Oran …
-
Copepod response behavior in turbulence
… component velocity vectors of the flow using stereo PIV. These measurements are done in a way that does not elicit copepod response. Tomographic PIV is done downstream the square fractal grid without copepods to gain volumetric velocity knowledge of the flow in the measurement volume. Copepods …
-
Combined irregular roughness and favorable-pressure-gradient effects in a turbulent boundary layer
… two-dimensional particle image velocimetry (PIV) measurements in the streamwise{ wall-normal plane and stereo PIV measurements in the wall-normal{spanwise plane. The roughness under consideration was replicated from a turbine blade damaged by deposition of foreign materials and contains a …
-
Impact of Axial Casing Groove Geometry on the evolution of flow structures and turbulence in an axial compressor
… the stall margin. This experimental study uses stereo-PIV measurements to characterize the interactions of different axial casing grooves (ACGs) with the flow in the tip region of an axial turbomachine. The tests involve grooves with the same inlet overlapping with the rotor blade leading edge, …
-
Best Practices for Volume Flow Rate Measurements Using PIV at the Exit of a Turbulent Round Jet
Particle image velocimetry (PIV) is an optical flow measurement technique that is used to measure volume flow rate at the exit of a turbulent, round nozzle. The objective of this thesis is to determine how to best make this measurement. The quality of the measurement is affected by a range of data …
-
Experimental and numerical study of Taylor-Couette flow
… a combination of particle image velocimetry (PIV) experimental data and computational fluid dynamics (CFD). Wavy vortex flow and modulated wavy vortex flow which are two flow regimes of Taylor-Couette flow are investigated using the PIV technique and power spectral density. In addition, the …
-
Numerical and experimental investigation of turbulence and transport in mixing geometries
… data from particle image velocimetry (PIV), planar laser-induced fluorescence (PLIF), and simultaneous PIV/PLIF. In addition, the vortex flow in a four-inlet vortex reactor is studied by means of Reynolds-averaged Navier-Stokes simulations and stereo-PIV. The investigations shed light …
-
Experimental investigation of the far-field rotorcraft wake structure
… of the velocity field are acquired using a stereo PIV system synchronized to capture up to 500 degrees of vortex age, with 10 degree wake age offsets, during hover conditions. The nominal operating condition of the rotor is at a rotational rate of 1520RPM, corresponding to ReC = 248,000 with …
-
EFFECTS OF WALL PLANE TOPOLOGY ON VORTEX-WALL INTERACTIONS IN A FORCED IMPINGING JET
… stresses. Multi-plane ensemble-averaged stereo PIV is employed to obtain volumetric, phase-averaged data that are subjected to a triple decomposition to quantify the unsteady behavior resulting from the coherent and stochastic fluctuations of the impinging structures. The effects of the …
-
Characterizing Tilt Effects on Wind Plants
… row from -15° to 15° in chosen 5° increments. Stereo PIV measurements of the instantaneous velocity field were recorded at four locations for each angle. Tilted wakes are described in terms of the average streamwise velocity field, wall-normal velocity field, Reynolds stresses, and mean …
-
A wind tunnel facility for the evaluation of a land-based gas turbine diffuser-collector
… a variety of probe traverse measurements, and Stereo-PIV. Flow within the collector and diffuser were determined to be heavily dependent upon the collector geometry. PIV measurements showed the development of two large counter rotating vortices within the collector. Each symmetric vortex grew …
-
Experimental study of low-order models of highly-irregular roughness and their impact on turbulent boundary layers
… roughness, and 2-D particle-image velocimetry (PIV) was used to acquire ensembles of instantaneous velocity fields in the streamwise–wall-normal plane for developing- and developed-flow conditions at moderate Reynolds number followed by stereo PIV measurements in a wall-parallel plane deep in …
-
Experimental Study of Low-Order Models of Highly-Irregular Roughness and Their Impact on Turbulent Boundary Layers
The stereo-PIV measurements deep within the roughness sublayer at y = 0.047delta reveal a wealth of information about roughness-induced effects, including the tendency of the roughness to promote 'channeling' of the flow in the form of low- and high-momentum pathways as noted in contour maps of the …
-
Investigation of tip vortex aperiodicity in hover
… were measured on the reduced-scale rotor using a stereo PIV system. The blade loading for the reduced scaled rotor was Ct /σ = 0.044 and the blade rotational speed was 1520 RPM, which corresponds to a tip Reynolds number of 248,000. The 95 % confidence region for the position of tip vortex cores …
-
Experimental investigation of transverse acoustic instabilities
This work presents 5 kHz stereo PIV and OH PLIF measurements as well as OH* and CH* chemiluminescence measurements of transversely forced swirl flames. The presence of transverse forcing on this naturally unstable flow both influences the natural instabilities, as well as amplifies disturbances …
-
EFFECTS OF TIP GAP SIZES AND OPERATING CONDITIONS ON THE FLOW STRUCTURES AND THE COMPLEX TURBULENCE IN THE TIP REGION OF AN AXIAL COMPRESSOR ROTOR
… index-matched facility. Flow visualization and stereo-PIV measurements are performed with two different tip gap sizes at two flow rates. Increasing the tip clearance causes a significant reduction in overall performance, hence altering the blade load distributions and characteristic flow …
Page 1 of 2