Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"Stiffness Model"”.

  1. Stiffness Model of a Die Spring

    … research is to determine the three-dimensional stiffness matrix of a rectangular cross-section helical coil compression spring. The stiffnesses of the spring are derived using strain energy methods and Castigliano's second theorem. A theoretical model is developed and presented in order to …

    vt Repository record for Stiffness Model of a Die Spring (opens in a new tab)

  2. A stiffness model for plane stress analysis

    The stiffness properties of a finite sized square model element of an isotropic plate under plane stress are presented. The model is a piece of the material itself and not a configuration of bars that replace the material. It is shown that the use of an extra kinematic condition instead of an …

    ubc Repository record for A stiffness model for plane stress analysis (opens in a new tab) Download PDF for A stiffness model for plane stress analysis (opens in a new tab)

  3. Determination of a Predictive Stiffness Model for a 1 DOF Human Inspired Robotic Joint

    … differ. From this understanding, a neuro-motor model (NMM) of a human elbow (previously established by Beardsley et al.) was augmented by the addition of a variable stiffness quality. The work in this thesis developed and tested a predictive stiffness model that attempts to recreate the …

    marquette Repository record for Determination of a Predictive Stiffness Model for a 1 DOF Human Inspired Robotic Joint (opens in a new tab)

  4. Lateral Restraint Brace Forces in Quarter Point and Third Point Plus Support Braced Z-Purlin Supported Roof Systems Subject to Gravity Load

    … third point plus support bracing. To that end, a stiffness model used in the past has been reintroduced. This model has been modified slightly to better represent roof system behavior. The updated stiffness model was then used to estimate lateral restraint forces for a number of roof systems with …

    vt Repository record for Lateral Restraint Brace Forces in Quarter Point and Third Point Plus Support Braced Z-Purlin Supported Roof Systems Subject to Gravity Load (opens in a new tab)

  5. Design and analysis of the three degrees of freedom parallel kinematic machine

    … The PKM is optimized based on the developed stiffness model. Kinematics and dynamics of the new PKM is also modeled and simulated.

    uoit Repository record for Design and analysis of the three degrees of freedom parallel kinematic machine (opens in a new tab)

  6. Towards a safe and responsive control framework for human-centered robots

    … the work in this dissertation explores new models for reducing human uncertainty and new control algorithms for improving safety warranty. The first half of this dissertation introduces a complex stiffness model for describing the uncertain human impedance. The discovery of this new model is …

    texas Repository record for Towards a safe and responsive control framework for human-centered robots (opens in a new tab)

  7. Tyre modelling for rolling resistance

    … 2003. This study investigates mathematical models based on physical understanding and literature reviews of tyre rolling resistance phenomena. The work aims to develop a tyre model that explains the influence of tyre inflation pressure, tyre size, velocity and normal load on the rolling …

    chalmers Repository record for Tyre modelling for rolling resistance (opens in a new tab)

  8. Theoretical and experimental investigation of the response of a rotor accelerating through critical speed

    … A two degree-of-freedom lumped mass, damping and stiffness model was developed to simulate the response of a simply supported, single disk rotor during both acceleration and deceleration. The equations of motion were then solved numerically. The computer model was used to determine the effect of …

    nps Repository record for Theoretical and experimental investigation of the response of a rotor accelerating through critical speed (opens in a new tab)

  9. Abaqus Based Modelling of Ball Bearings

    … deep groove ball bearings can be accurately modeled in Abaqus by replacing rolling elements with non-linear springs. The main focus is on the transfer of radial, axial, and combined loads. Existing analytical stiffness models, such as those by Harris and Hamrock, were found inadequate for …

    chalmers Repository record for Abaqus Based Modelling of Ball Bearings (opens in a new tab)

  10. Development of Prediction Methods for the Lateral Anchorage Requirements in Metal Building Roof Systems

    … the use of multiple anchorage devices of finite stiffness. The development of this method relied on a stiffness model, similar to that used by previous researchers, which was updated and calibrated to the results of recently completed tests. The calculation procedure explicitly addresses the …

    vt Repository record for Development of Prediction Methods for the Lateral Anchorage Requirements in Metal Building Roof Systems (opens in a new tab)

  11. Modeling Adjustable Passive Stiffness in Detrusor Smooth Muscle

    … strain softening. Strain softening is a loss of stiffness following a stretch to a longer length and is reversible upon muscle activation. Because of this behavior, steady state passive force in detrusor is not constant for a given muscle length and can be adjusted by an intracellular mechanism. …

    vcu Repository record for Modeling Adjustable Passive Stiffness in Detrusor Smooth Muscle (opens in a new tab)

  12. Torsional Stiffness and Natural Frequency Analysis of a Formula SAE Vehicle Carbon Fiber Reinforced Polymer Chassis Using Finite Element Analysis

    Finite element is used to predict the torsional stiffness and natural frequency response of a FSAE vehicle hybrid chassis, utilizing a carbon fiber reinforced polymer sandwich structure monocoque and a tubular steel spaceframe. To accurately model the stiffness response of the sandwich structure, a …

    calpoly Repository record for Torsional Stiffness and Natural Frequency Analysis of a Formula SAE Vehicle Carbon Fiber Reinforced Polymer Chassis Using Finite Element Analysis (opens in a new tab)

  13. Theoretical investigation of rotor acceleration scheduling through critical speed

    … two degree-of- freedom lumped mass, damping and stiffness model was developed to simulate the response of a simply supported, single disk rotor. Given an arbitrary input acceleration or deceleration, the equations of motion were solved numerically using a fourth order Runge-Kutta routine. The …

    nps Repository record for Theoretical investigation of rotor acceleration scheduling through critical speed (opens in a new tab)

  14. The Influence of Semi-Rigid Connections on the Behaviour of Beam and Column Structural System

    … theoretical with the assumption of a linear stiffness. Twenty beam end connector tests were carried out to study the effect of loading and unloading on joint behaviour. In each test two methods of displacement measurements were used in obtaining the moment curvature relationship. The same …

    oxford-brookes Repository record for The Influence of Semi-Rigid Connections on the Behaviour of Beam and Column Structural System (opens in a new tab) Download PDF for The Influence of Semi-Rigid Connections on the Behaviour of Beam and Column Structural System (opens in a new tab)

  15. Dynamic tailoring of beam-like structures. Application to High Aspect Ratio unitized box-beam and internal resonant structures

    … the present work, derives two equivalent plate models of curvilinear stiffened panels namely, constant (or homogenized) stiffness model and variable stiffness model. The models are assessed through finite element analysis. In the spirit of CAS (Circumferentially Asymmetric Stiffness), the …

    poli-torino Repository record for Dynamic tailoring of beam-like structures. Application to High Aspect Ratio unitized box-beam and internal resonant structures (opens in a new tab)

  16. The influence of semi-rigid connections on the performance of steel framed structures in fire.

    … anticipated in the future, and as such a spring-stiffness model has been presented for both bare-steel and composite flush end-plate connections. The use of a spring-stiffness model compares favourably with other forms of modelling due to the combination of efficient solution and the ability to …

    whiterose Download PDF for The influence of semi-rigid connections on the performance of steel framed structures in fire. (opens in a new tab)

  17. Design of a Novel Active Ankle Foot Orthosis Using Permanent Magnets for Drop Foot Assistance

    … mechanism works in the principle of Variable Stiffness Actuator (VSA). Permanent Magnets have been used to design this mechanism. They function like non-linear springs in an antagonistic arrangement. The mechanism can provide stiffness augmentation and torque assistance to patients suffering …

    buffalo Repository record for Design of a Novel Active Ankle Foot Orthosis Using Permanent Magnets for Drop Foot Assistance (opens in a new tab)

  18. Prediction of manufacturing stresses in thick-walled orthotropic cylinders

    … orthotropic cylinders was developed. Submodels have been developed for each sequence in the filament winding process. The submodels developed address the majority of the phenomena affecting the stress and cure state of a filament-wound composite cylinder. Contributions to the existing …

    nebraska Repository record for Prediction of manufacturing stresses in thick-walled orthotropic cylinders (opens in a new tab)

  19. Nonlinear Response of Torsionally Coupled Structures

    … response of a torsionally coupled single-story model consisting of a rigid diaghram resting on three equally spaced frames is investigated. The main concern herein is the peak ductility demand especially at edges.</p> <p>A limited parametric study is undertaken to identify trends in peak …

    mcmaster Repository record for Nonlinear Response of Torsionally Coupled Structures (opens in a new tab)

  20. Effects of multi-joint stiffness on the stable, Cartesian workspace for dexterous manipulation with the anatomically correct testbed hand

    … tasks stably through modulation of musculotendon stiffness, setting a high standard for the capabilities of robotic manipulators. Applying passive stiffness boundary analysis to quantify human-like stiffness modulation properties on a human-like physical simulation platform, the Anatomically …

    texas Repository record for Effects of multi-joint stiffness on the stable, Cartesian workspace for dexterous manipulation with the anatomically correct testbed hand (opens in a new tab)

Page 1 of 3