Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 390 for “"Storage Modulus"”.
-
Effect of pH, salt type and denaturants on the denaturation properties, storage modulus, secondary structure and microstructure of hen egg s-ovalbumin heat-induced gels
Thesis (Ph. D.)--Michigan State University. Department of Food Science and Human Nutrition, 1991
-
Photomechanical Properties of Azobenzene Doped LCN Films for Surface Healing Applications
… manufacturing by measuring properties such as storage modulus and tan(delta) values. The healing performance of each of these different recipes is then compared to film stiffness in terms of their storage modulus their storage modulus. An inverse relationship between the material’s storage …
-
Mechanical Performance Of Graphene Enhanced Nitrile Rubber
… rubber. The mechanical properties reported are storage modulus and tensile strength, as well as the cutting resistance when being coated on a nylon substrate. The procedure follothree distinct phases. Phase 1 served as a screening phase. Phase 2 folloa statistical design-of-experiments approach …
-
Design and Fabrication of Solid-State Electrolytes for Supercapcitor Applications
… Rheological analysis indicated that the storage modulus and dynamic viscosity of the GPE with the highest crosslink density increased by 7 and 6 orders of magnitude respectively. Also, crosslinking transforms the response of synthesized electrolytes from liquid viscoelastic to solid …
-
Functionalized Graphene: Characterization and Mechanical Reinforcement
… was well dispersed in these systems and provided storage modulus mechanical reinforcement of 150% at 1.0% loading which is higher than the level of reinforcement reported in comparable materials. This level of storage modulus mechanical reinforcement would require a 4% loading level of …
-
Dynamic mechanical analysis of articular cartilage using nanoindentation
… mechanical analysis was used to measure the ?, storage and loss modulus of the samples. The testing showed that the storage modulus displays frequency dependence up until higher frequencies where the response plateaus and becomes insensitive to frequency. The loss modulus was found to have no …
-
Effect of composite microstructure on electrical and mechanical properties of poly(vinyl acetate) composites with carbon black and clay.
… improvement in both electrical conductivity and storage modulus with low carbon black loading, while the solution-based composite achieves significant property enhancements at higher carbon black loading because of the greater percolation threshold. The effect of clay in both emulsion and …
-
Plant Protein-Based Nanocomposite Materials: Modification of Layered Nanoclay by Surface Coating and Enhanced Interactions by Enzymatic and Chemical Cross-linking
… at pH 6.5. Without MMT, the maximum storage modulus was achieved at 100 mM NaCl and stronger gels with shorter gelling times were observed at higher mTGase concentrations. Conversely, the incorporation of coated-MMT inhibited the effect of ionic strength on soy protein gelation, and …
-
Mechanical Performance of Industrial Hemp Fibre Reinforced Polylactide and Unsaturated Polyester Composites
… cellulose crystallinity. The average Young's modulus and thermal stability of all treated fibres increased compared with untreated fibres. This was considered to be as a result of densification of fibre cell walls due to the removal of non-cellulosic components during treatment. It was also …
-
A Comparison of Tung Oil Resin Reinforcements Using Fibrous Proteins and Peptides for Biological and Materials Applications
… 37 °C collagen reinforcement had increased the storage modulus of the tung oil thermoset from 97.45 MPa to a range of 99.40 MPa - 186.62 MPa. At 37 °C, fibroin reinforcement increased the storage modulus of the tung oil thermoset from 97.45 MPa to a range of 122.23 MPa - 140.98 MPa. TGA showed …
-
Solvent-Induced Crystallization of Poly(ether ether ketone)
… was determined that the initial decrease in the storage modulus was due to the incredible plasticization of the amorphous phase. When the films contained greater than 60 % of the ultimate crystallinity, the storage modulus was observed to increase as a result of the reinforcing effect of the …
-
Miscibility, dynamic mechanical and optical limiting behavior of C60-based and multiwalled carbon nanotube- containing polymeric materials
… with a FPHEMA also improves its storage modulus at higher temperatures. Melt-mixing multiwalled carbon nanotubes with sufficient 1-(aminopropyl)-imidazole can disperse them better and compatibilize them with Phenoxy or poly(vinyl acetate-co-vinyl alcohol), thus producing …
-
Decrosslinking of AOTEMPO-derived polyethylene thermosets
… by measurements of gel content and dynamic storage modulus (G’). Base-catalyzed hydrolysis was more effective than acid-catalyzed hydrolysis and alcoholysis, reducing gel content from 85% to 55% after three days at 90°C and two days at 140°C. However, thermolysis at 230°C achieved the …
-
cyanate ester based multifunctional nanocomposites for structural capacitors
… also results in a large increase in composite's storage modulus. Furthermore, the AC conductivity of the composite was observed to decrease under compressive mechanical stresses due to the piezoresistive effect of Si.</p> <p>Agglomerates of Fe3O4 nanoparticles coated with SiO2 are synthesized and …
-
Hygrothermal Effects on Viscoelastic Properties of Amine-Hardened Epoxy
… known comprehensive report of the variation of storage modulus as a function of time, temperature and water uptake for an epoxy resin system. When room temperature DMA tests were conducted on progressively aged samples, we found material behaviour to be highly dependent on the hygrothermal aging …
-
DESIGN OF A CUSTOM DIGITAL LIGHT PROJECTION PRINTER FOR IN-SITU PRODUCTION OF COMPOSITES WITH IMPROVED THERMOMECHANICAL PROPERTIES
… in glass transition temperature (Tg) or glassy storage modulus (E') at 25°C as a function of layer height. It was found that composites exhibited up to a 25% improvement in E' relative to the matrix (2.9 versus 3.7 GPa) at a fiber volume fraction of 4-6% and a layer height of 200 micro-m. All …
-
Lightweight Approaches to Polyester Composites: Nanocellulose and Syntactic Foams
… the ion exchanged CNCs displayed an enhanced storage modulus and improved elastic modulus, while maintaining composite density. Surface coating of HGS with CNC was successfully completed. CNC coated HGS-PR composites displayed enhanced storage modulus and reduced maximum water uptake relative …
-
Manufacturing of Poly(vinylidene fluoride) and Evaluation of its Mechanical Properties
… films successfully measured changes in loss and storage modulus. In-situ creep testing measured an increase in stiffness while in-situ dynamic mechanical analysis (DMA) measured and overall decrease in loss and storage modulus. Differences in results between the two experiments are attributed to …
-
Time dependence of nonlinear flow dynamics of near hard sphere suspensions
… low frequency terminal region where the linear storage modulus first exceeds the loss modulus and the high frequency cross over time where loss modulus exceeds the storage modulus. At low frequencies where the viscous behavior dominates, the onset of nonlinearities is driven by increases in rate …
-
Rheology of heavy crude oil and viscosity reduction for pipeline transportation
… Þ, yield stress x 0 , thixotropic behavior, the storage modulus G' , the loss modulus G" , the complex modulus G* , and the complex viscosity j*. The results showed a significant viscosity reduction of 0.375 Pa.s at room temperature 298 K through which it complies with the desired value required …
Page 1 of 20