Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2016 for “"Strain Rate"”.
-
Strain rate and temperature effects on strain rate sensitivity in three dual-phase sheet steels
Includes bibliographical references.
-
Strain-rate effects in quartz sand
… require data at these high pressures and strain rates in order to develop robust soil constitutive models and adapt to new threats. The one-dimensional compression of three sandy soils was compared under quasi-static loading to axial stresses of 800 MPa. Trends in behaviour were identified …
-
High strain rate properties of structural aluminium.
… been used in the past to determine the stress-strain relationship of metals and alloys at high strain rates of up to 2.2 x 10 per second; some of these were approximate whilst others required expensive equipment. In the present study three aluminium alloys, HE15, HE30TF and DTD5044 have been …
-
Hard Rocks Under High Strain-Rate Loading
… and tabulated data. Optimal designs require accurate and complete knowledge of rock behavior under various loading conditions. The vast majority of the properties available in the literature have been gathered by deforming the specimen slowly. These properties have been used to establish …
-
High strain rate studies of armor materials
This thesis focuses on the high strain rate behavior of Maraging steel 300, High Hardness Armor (HHA) and Aluminum 5083 – H131 Alloy. These materials are used by the Department of National Defense (DND) of Canada as armor plate materials in military applications. The aim of the research is to …
-
Strain rate behaviour of Saint-Jean-Vianney clay
A series of constant rate of strain compression tests and creep rupture tests have been performed on undisturbed, isotropically consolidated quick clay from the Saint-Jean-Vianney region, Quebec Province, Canada. Both drained and undrained tests were performed in conventional triaxial equipment. …
-
High strain rate constitutive equation for metallic materials
… and flow stress increase significantly with strain rate. High speed Forming and Machining operation gives rise to strain rates varying from 10 to 10^ per second. A number of research work have been reported in which various techniques have been described for strain rates sensitivity. One of …
-
Hypervelocity impact on strain-rate sensitive shielded plates
… in good agreement with curves that have been generated empirically.
-
High Strain Rate Impact Response of Polymeric Materials
… conductivity, which render their response highly rate-dependent and susceptible to adiabatic heating. At hypervelocity strain rates exceeding 106 s-1, inertial effects, shock waves, and localized thermal softening dominate failure. This dissertation employs the Laser-Induced Projectile Impact Test …
-
High Strain Rate Impact Response of Polymeric Materials
… conductivity, which render their response highly rate-dependent and susceptible to adiabatic heating. At hypervelocity strain rates exceeding 106 s-1, inertial effects, shock waves, and localized thermal softening dominate failure. This dissertation employs the Laser-Induced Projectile Impact Test …
-
High Strain Rate Impact Response of Polymeric Materials
… conductivity, which render their response highly rate-dependent and susceptible to adiabatic heating. At hypervelocity strain rates exceeding 106 s-1, inertial effects, shock waves, and localized thermal softening dominate failure. This dissertation employs the Laser-Induced Projectile Impact Test …
-
HIGH STRAIN RATE MEASUREMENTS FOR PREDICTING BRAIN TRAUMA
… Sensor performance under compressive and constrained conditions was also evaluated, revealing limitations due to pre-strain and ma- terial swelling. A localization framework based on LASSO regression was de- veloped and validated on a 2D sensor matrix. While complete 3D localization was not …
-
Specimen size effects in slow strain-rate testing
… the effect of specimen dimensions in slow strain-rate environmental effects testing. Tension tests of free machining brass were conducted in a mercuric nitrate solution at a constant crosshead displacement rate of 10⁻³(inch/sec). Thirty-six smooth round bar specimens with different …
-
Strain rate effects on inelastic response of beams
Thesis (M.S.)--Michigan State University. Dept. of Civil Engineering, 1965
-
Strain rate effects in one-dimensional consolidation of peat
A series of one-dimensional strain rate controlled consolidation tests were performed on remolded peat to establish the void ratio - effective stress - strain rate relationship for this soil. The relationship was found to be independent of the size of sample. In addition, the void ratio - …
-
High Strain Rate Characterization of Advanced High Strength Steels
… has considered the characterization of the high strain rate constitutive response of three steels: a drawing quality steel (DDQ), a high strength low alloy steel (HSLA350), and a dual phase steel (DP600). The stress-strain response of these steels were measured at seven strain rates between 0. …
-
High strain rate behavior of graphene reinforced polyurethane composites
… composites (GR/PU) at high strain rates ranging from approximately 1500 s-1 to 5000 s-1. Four types of GR/PU composites with different GR contents: 0.25% GR, 0.5% GR. 0.75% GR and 1 % GR were prepared by the solution mixing method, and divided into two groups of unheated and …
-
Effect of strain rate on flow stress of copper
Includes bibliographical references (page 67).
Page 1 of 101