Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Strain profile"”.
-
Characterising flow through artificial poro-elastic media
… of several samples is measured as a function of strain. The flow experimental setup comprises a tightly sealed chamber and a mechanism to strain the porous matrix and the pressure difference and the resultant flow rate through the matrix are measured. This gives us the hydraulic resistance which …
-
Work loop dynamics of the pigeon (Columba livia) humerotriceps and its potential role for active wing morphing
… different flight modes revealed variation in strain profile, activation timing and duration, and in contractile cycle frequency of the humerotriceps. This variation suggests that the pigeon humerotriceps may alter wing shape in diverse ways. To test this hypothesis, I developed an in situ work …
-
Ram Accelerator Barrel Response to Transient Loads
… cycle creates a distinctly different pressure profile inside the barrel, and by extension a distinctly different stress and strain profile within the barrel itself. Finite Element Analysis (FEA) was performed using ABAQUS to investigate changes in barrel stress and strain due to transient …
-
Strain Induced Quantum Emitters in Monolayer WSe₂: Fabrication and Characterization of Dimple Dot Devices
Strain induced defects in monolayer tungsten diselenide (WSe₂) give rise to localized exciton funnels, offering a promising approach for the development of tunable quantum emitters. The quantum devices fabricated for this thesis used a modified dimple dot geometry, in which nano indentation creates …
-
Skeletal Biomechanics and Response to Mechanical Load: A Comparative Approach in the Mouse and Chukar Partridge
… A healthy skeleton adapts to the bone tissue strain profile and magnitude of loads it experiences on a daily basis in order to maintain reasonable safety factors. In skeletal diseases, such as osteoporosis, a bone’s ability to adapt and maintain structural integrity in response to increased …
-
Development of a dynamic torsion testing system
… testing cylindrical specimens in torsion at high strain-rates. In addition to well-established designs, this testing apparatus will include a conical mirror combined with a high speed camera that allows time-resolved optical observation of the shear deformation on the surface of the specimen. The …
-
Lattice Relaxation by Plastic Flow and Study of Apparent Critical Layer Thickness in II-VI/GaAs(001) Heterostructures
… for the time evolution of the equilibrium strain profile, thus enabling a more accurate description of uniform layers as well as compositionally-graded structures. We have applied the generalized plastic flow model to ZnSe/GaAs (001) heterostructures grown by a two-step process using …
-
Investigating Damage within Zirconium Systems using X-Ray Diffraction Techniques
… In this work Convolutional Multiple Whole Profile (CMWP), an XRD analytical technique, is investigated to determine its validity and viability, by using a zirconium sample of varying deformation (as-received, heat treated, 30% cold worked, 48% cold worked and 60% cold worked) as well as …
-
BIOENGINEERING OF AN IN VITRO MICROPHYSIOLOGICAL HUMAN ALVEOLAR MODEL
… sustain lung cells are limited by the necessary strain profile and the ability to maintain primary human alveolar cells. We are engineering an alveolus-on-a-chip device that simulates complex functional human alveoli, including the thin microporous alveolar barrier and the three-dimensional …
-
Dynamic Body Armor Shape Sensing Using Fiber Bragg Gratings and Photoassisted Silicon Wire-EDM Machining
… a proportionality relationship between the strain of the fiber to the acceleration of the impacting projectile is found and is used to obtain the rate of the back-face deformation. A hybrid model is developed to handle errors caused by the stick-slip of the fiber by fitting an inverse …
-
Near surface wear structure of ceramic components
… band simulation was used to determine the strain profile in the near surface regions of a flat and a rough fully stabilized zirconia samples. The results show that a compressive zone is present in the near surface region of each sample. A partially stabilized zirconia disk was examined …
-
The deformation and fracture of unidirectional boron-aluminum
… crack face displacement, and transverse strain profile near the notch tip.</p><p>It was found that the net section stress at failure for center-notched specimens was considerably below that of an unnotched specimen. The net section stress at failure decreased sharply in the range 0 ≤ …
-
Verification of the dissipated energy based fatigue model using field data
… layer. To achieve this goal, tensile strains at the bottom of the top hot-mix asphalt (HMA) layer must be limited to below a certain value known as the fatigue endurance limit (FEL). In this thesis, a method for estimating the allowable strain in the asphalt layers of flexible airfield …
-
Nanoscale Material Characterization of Silicon Nanowires for Application in Reconfigurable Nanowire Transistors
… for Program and Control gates and radial strain induced by the self-limiting oxidation, which influences the carrier mobility resulting in symmetric p and n characteristic curves of an RFET. Despite its potential, in-depth nanoscale studies on the structural and compositional …
-
An Evaluation of Optical Fiber Strain Sensing for Engineering Applications
… gratings. These fibers were bonded with AE-10 strain gage adhesive. The results indicate that lower strain amplitudes do not produce cause for concern, but that larger strain amplitudes (on the order of 3500 μ) may cause some sensors to become unreliable. The strain response of acrylate coated …
-
Plastic hinge length in high-rise concrete shear walls
… over the plastic hinge length. The shape of the strain profile in slender walls after cracking depends on the amount of reinforcement. Longer walls have larger plastic hinge lengths than shorter walls. Compressive axial loads reduce the plastic hinge length, tensile axial loads have the opposite …
-
Flight safety in helicopter emergency medical services
… development of the cardiometabolic risk marker profile of pilots aged 60 and over at the end of follow-up was more favorable than that of younger pilots (with large unexplained interindividual differences in risk marker levels). Perceived rewards at work, perceived predictability of work, and …
-
An experimental analysis of operating conditions in cold roll-forming
… measuring section quality and longitudinal straining to give a picture of bending. A channel section was chosen for its simplicity and compatibility with previous work. Quality measurements were measured in terms of vertical bow, twist and cross-sectional geometric accuracy, and a complete …
-
Seismic performance of full-scale reinforced concrete columns
… was investigated by studying the compressive strain profile of the core concrete. An analytical procedure was used to study the effect of various parameters on plastic hinge length. Based on the results of the experiments and a parametric study, a new expression that can be used to estimate …
Page 1 of 3