Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 126 for “"Strain rate dependent"”.

  1. Strain Rate Dependent Properties of Younger Human Cervical Spine Ligaments

    … models for injury simulation requires accurate ligament mechanical properties at relevant loading rates. The objective of this research was to provide detailed mechanical properties for the cervical spine ligaments, by performing tensile tests at elongation rates relevant to automobile …

    waterloo Repository record for Strain Rate Dependent Properties of Younger Human Cervical Spine Ligaments (opens in a new tab)

  2. Stress-State and Strain-Rate Dependent Multiscale Characterization of ARMOX 500T

    A strain-rate and stress-state dependent experimental characterization is conducted for the parameterization of a triaxiality and lode angle parameter (LAP) dependent Generalized Incremental Stress-State Dependent Damage Model (GISSMO) for ARMOX 500T (AX500) armour steel. 100+ mechanical tests have …

    york Repository record for Stress-State and Strain-Rate Dependent Multiscale Characterization of ARMOX 500T (opens in a new tab)

  3. Stress-State and Strain-Rate Dependent Multiscale Characterization of ARMOX 500T

    A strain-rate and stress-state dependent experimental characterization is conducted for the parameterization of a triaxiality and lode angle parameter (LAP) dependent Generalized Incremental Stress-State Dependent Damage Model (GISSMO) for ARMOX 500T (AX500) armour steel. 100+ mechanical tests have …

    york Repository record for Stress-State and Strain-Rate Dependent Multiscale Characterization of ARMOX 500T (opens in a new tab)

  4. Strain-rate Dependent Fracture Load Prediction of Lead-free Solder Joints

    The critical strain energy release rate at crack initiation, Jci, has been shown to govern the fracture of short solder joints. The present work measured Jci for 2 mm long SAC305 solder joints as a function of the strain rate and phase angle using DCB specimens. A drop tester was designed and built …

    toronto-retro Repository record for Strain-rate Dependent Fracture Load Prediction of Lead-free Solder Joints (opens in a new tab)

  5. Strain Rate Dependent Response and Fluid Load Support of the Knee Joint Under Compression

    … in the joint highly depends on the compression rate. This response has been extensively investigated in vitro with tissue discs, but not sufficiently examined in situ and in vivo within the intact joint. Computational simulation is a widely used tool to study this response. The development of …

    calgary Repository record for Strain Rate Dependent Response and Fluid Load Support of the Knee Joint Under Compression (opens in a new tab)

  6. Crystal Plasticity Based Numerical Modeling of Temperature and Strain Rate Dependent Behavior in Mg Alloys

    … microstructure-property relationship at various strain rates and temperatures. In these regards, the experimental investigation of mechanical behavior and texture evolution for E-form Plus Mg alloy at various strain rates and temperatures is performed. In order to establish the correlation …

    waterloo Repository record for Crystal Plasticity Based Numerical Modeling of Temperature and Strain Rate Dependent Behavior in Mg Alloys (opens in a new tab)

  7. Crystal plasticity based modelling of the strain rate dependent mechanical behaviour of Ti‑6Al‑4V

    … of the material is affected by factors as strain rate and temperature, and it is shown that the VPSC model is able to capture the anisotropic behaviour of Ti-6Al-4V for a wide range of conditions.

    ghent Repository record for Crystal plasticity based modelling of the strain rate dependent mechanical behaviour of Ti‑6Al‑4V (opens in a new tab)

  8. Characterizing and Modelling the Strain Rate-Dependent Constitutive Response of a Unidirectional Non-Crimp Fabric Composite Material

    … of non-crimp fabric composites at different strain rates is required. This study focuses on characterizing the strain rate-dependent deformation response of a unidirectional non-crimp fabric (UD-NCF) composite, comprising PX35 UD-300 carbon fiber fabric and TRAC 06150 snap cure epoxy, through …

    waterloo Repository record for Characterizing and Modelling the Strain Rate-Dependent Constitutive Response of a Unidirectional Non-Crimp Fabric Composite Material (opens in a new tab)

  9. Fracture criterion to predict strain-rate dependent failure of unidirectional carbon fiber composites under multi-axial state of stress

    Advanced polymer matrix composites exhibit time-dependent deformation and fracture owing to the viscoelastic nature of the polymer matrix. Often this rate dependency is characterized under a single loading mode while the material is simultaneously subjected to multiple loading modes while in …

    manitoba Repository record for Fracture criterion to predict strain-rate dependent failure of unidirectional carbon fiber composites under multi-axial state of stress (opens in a new tab)

  10. Strain Rate Effects on a Ductile Moment Resisting Frame with RBS Connection Subjected to Seismic Ground Motions

    A procedure has been developed to generate stress-strain curves for mixed-mode hardening plasticity model using test data by other researchers conducted at different strain rates for two grades of steel. The strain rate dependent material properties for these materials are used in different …

    carleton Repository record for Strain Rate Effects on a Ductile Moment Resisting Frame with RBS Connection Subjected to Seismic Ground Motions (opens in a new tab)

  11. Finite Element Analysis of Ballistic Penetration of Plain Weave Twaron CT709® Fabrics: A Parametric Study

    … to woven fabrics cannot adequately represent strain rate-dependent behavior exhibited by the Twaron fabrics. One-dimensional models based on linear viscoelasticity can account for rate dependency but are limited by the simplifying assumptions on the fabric architecture and stress state. In the …

    tamu Repository record for Finite Element Analysis of Ballistic Penetration of Plain Weave Twaron CT709® Fabrics: A Parametric Study (opens in a new tab)

  12. Mathematical modelling of the high temperature constitutive behaviour of as-cast AA5182 aluminum alloy

    … alloy. The temperatures (i.e., 250-500°C) and strain rates (1E-5 – 1s⁻¹) used for the tests were chosen to represent typical conditions experienced in the solid phase during DC casting due to thermally induced deformations which occur during cooling. Using the measurement results, a …

    ubc Repository record for Mathematical modelling of the high temperature constitutive behaviour of as-cast AA5182 aluminum alloy (opens in a new tab) Download PDF for Mathematical modelling of the high temperature constitutive behaviour of as-cast AA5182 aluminum alloy (opens in a new tab)

  13. Intermediate strain rate testing methodologies and full-field optical strain measurement techniques for composite materials characterisation

    Two optical full-field strain measurement techniques, Digital Image Correlation and the Grid Method, are applied to characterise the strain-rate dependent constitutive behaviour of composite materials. Optical strain measurement techniques based on full-field images are well established for …

    soton Download PDF for Intermediate strain rate testing methodologies and full-field optical strain measurement techniques for composite materials characterisation (opens in a new tab)

  14. Constitutive modeling the elasto-viscoplastic behavior of Regina clay soil under the drained stress path condition

    The stress–strain behavior of soft clay soil is dependent on the applied strain rate and such time dependency behavior should be considered in geotechnical engineering projects such as the bearing capacity analysis for a foundation. Most previous studies focus on elastic-viscoplastic behavior of …

    concordia Download PDF for Constitutive modeling the elasto-viscoplastic behavior of Regina clay soil under the drained stress path condition (opens in a new tab)

  15. Dynamic Asthenospheric Weakening Facilitating Plate Tectonic Motion

    … role in plate tectonics. Two-dimensional, time-dependent, numerical models are presented that examine the role of initial slab dip and a strain-rate dependent viscosity on the early phase of subduction. The parameter sweep tests three initial slab dips (30°, 45°, and 60°) and four bounds on the …

    houston Repository record for Dynamic Asthenospheric Weakening Facilitating Plate Tectonic Motion (opens in a new tab)

  16. Rate Effects in Fine Grained Soils

    The strain rate dependent behaviour of fine grained soils is an important aspect of geotechnical engineering. During dynamic or rapid events such as earthquakes and rapid pile testing, a fine grained soil will display significantly different behaviour than may be observed over the long life span of …

    dundee Repository record for Rate Effects in Fine Grained Soils (opens in a new tab) Download PDF for Rate Effects in Fine Grained Soils (opens in a new tab)

  17. Progressive failure analysis of composite laminates based on elastoplastic and elasto-viscoplastic damage models

    … mechanics and plasticity theory. To simulate the strain rate-dependent effects, a consistency elasto-viscoplastic damage model that accounts for the strain rate-dependent plastic response and stiffness degradation of composites has also been developed. Based on the return mapping algorithm, …

    unsw Repository record for Progressive failure analysis of composite laminates based on elastoplastic and elasto-viscoplastic damage models (opens in a new tab)

  18. Dual-Scale Finite Element and Machine Learning Framework for Predicting Effective Inelastic Deformation of Unidirectional Non-Crimp Fabric Composites Considering Manufacturing-Induced Defects

    … posing substantial challenges for accurate property prediction. The inherent complex multiscale structure of UD-NCF composites must be considered when predicting mechanical properties, where finite element (FE)-based approaches are preferred. However, the high computational cost of …

    waterloo Repository record for Dual-Scale Finite Element and Machine Learning Framework for Predicting Effective Inelastic Deformation of Unidirectional Non-Crimp Fabric Composites Considering Manufacturing-Induced Defects (opens in a new tab)

  19. Rate-Dependent Deformation of Thin Metal Foils

    … A bulge test has been devised to study the strain-rate-dependent deformation behavior of layered metal composites. Using a small-diameter test tube capable of operating at quasistatic and dynamic regimes, single-layered, stacked, and bonded multi-layered samples were tested to observe their …

    tamu Repository record for Rate-Dependent Deformation of Thin Metal Foils (opens in a new tab) Embargoed until 2027-05-01

  20. Three-dimensional rock-fall analysis with impact fragmentation and fly-rock modeling

    … set of impact simulations using a fully calibrated discrete element model (DEM), and is employed to predict impact fragmentation processes in rockfall analysis by either training a neural network model or linearly interpolating the database. A DEM was employed to model impact fragmentation in …

    texas Repository record for Three-dimensional rock-fall analysis with impact fragmentation and fly-rock modeling (opens in a new tab)

Page 1 of 7