Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 202 for “"Strain sensing"”.

  1. High temperature fiber optic strain sensing

    Two high temperature fiber optic based strain sensors have been developed for use in a coal combustor environment. An intensity based sensor uses losses created by longitudinal misalignment as a sensing mechanism and has a maximum operating temperature of 700°C. An interferometric based sensor …

    vt Repository record for High temperature fiber optic strain sensing (opens in a new tab)

  2. Zinc oxide nanowires for dynamic strain sensing

    A dynamic strain sensor using piezoelectric zinc oxide nanowires was demonstrated for potential application in structural health monitoring. Simulations and reviews of literature determined that strain of the nanowires by uniaxial compression yields the largest piezoelectric potential and that the …

    ubc Repository record for Zinc oxide nanowires for dynamic strain sensing (opens in a new tab) Download PDF for Zinc oxide nanowires for dynamic strain sensing (opens in a new tab)

  3. Strain-Sensing Smart Skin for Structural Health Monitoring

    … Traditional technologies used for measuring strain, such as resistance strain gages, can monitor only at discrete locations and along specific directions, and have limited ability to measure strains on small length scales. Optical fiber sensors and more specifically fiber Bragg grating (FBG) …

    rice Repository record for Strain-Sensing Smart Skin for Structural Health Monitoring (opens in a new tab)

  4. A dual wavelength fiber optic strain sensing system

    … (EFPI) has been extensively used as a strain sensor in various applications. However, like other interferometric sensors, the EFPI suffers from ambiguity in detecting directional changes of the applied perturbation, when the operating point is at a maxima or a minima on the transfer …

    vt Repository record for A dual wavelength fiber optic strain sensing system (opens in a new tab)

  5. Epoxy matrix composite strain sensing and cure monitoring

    … an extrinsic Fabry-Perot interferometer (EFPI) strain sensor is described, which permits the state of cure of an epoxy matrix to be monitored, when the sensor is embedded in a polymeric matrix composite. By using a glass rod with a retroreflecting end for the target fiber in the EFPI sensor, the …

    vt Repository record for Epoxy matrix composite strain sensing and cure monitoring (opens in a new tab)

  6. Wellbore completion monitoring using fiber optic distributed strain sensing

    … ortsverteilter Dehnungsmessung DSS (distributed strain sensing). Ergänzend zu faseroptischer ortsverteilten Temperaturmessung DTS (distributed temperature sensing), welche seit mehr als zwei Jahrzehnten in der Industrie Anwendung findet, kann jeder Ort einer Glasfaser zusätzlich Informationen …

    qucosa-diss

  7. Piezoresistive Behavior of Carbon Nanopaper Polymer Composites for Strain Sensing

    … become a multifunctional composite capable of strain sensing and heat actuation. Smart structures such as these can be used in many applications including deployable space structures, human motion detection, and structural health monitoring as flexible, sensitive and stable strain sensors in …

    ucf Repository record for Piezoresistive Behavior of Carbon Nanopaper Polymer Composites for Strain Sensing (opens in a new tab)

  8. Disturbance rejection for U.A.S. aircraft using bio-inspired strain sensing

    … of fast reflexive neuronal paths. Stretch and strain sensors on insect wings are used for flight control and can be found across many species. These are used for monitoring of bending and torsion during flight. The fast reflexive and proprioceptive mechanisms based on strain sensing found in …

    maryland Repository record for Disturbance rejection for U.A.S. aircraft using bio-inspired strain sensing (opens in a new tab)

  9. Improving Strain-Sensing Electronic Skins Based on Electrical Impedance Tomography

    … transduces spatially distributed pressures and strains. In recent years, EIT-based E-skins have gained considerable research interest due to their potential applications in wearable devices, human-machine interfaces, soft robotics, and prosthetics. However, their practicality is limited due to a …

    auckland-tech Repository record for Improving Strain-Sensing Electronic Skins Based on Electrical Impedance Tomography (opens in a new tab)

  10. An Evaluation of Optical Fiber Strain Sensing for Engineering Applications

    … gratings. These fibers were bonded with AE-10 strain gage adhesive. The results indicate that lower strain amplitudes do not produce cause for concern, but that larger strain amplitudes (on the order of 3500 μ) may cause some sensors to become unreliable. The strain response of acrylate coated …

    vt Repository record for An Evaluation of Optical Fiber Strain Sensing for Engineering Applications (opens in a new tab)

  11. Distributed Fibre Optic Strain Sensing to Monitor Deterioration in Reinforced Concrete

    … Rayleigh backscatter distributed fibre optic strain sensing (FOS) is a promising measurement technology that can provide relevant quantitative data across an entire structure as opposed to the single point data acquisition of conventional strain sensors. Utilizing this FOS technology, an …

    queens Repository record for Distributed Fibre Optic Strain Sensing to Monitor Deterioration in Reinforced Concrete (opens in a new tab)

  12. Performance enhancement techniques for Fibre Bragg Grating-based strain sensing systems

    Fibre Bragg Grating based strain sensing systems have found important applications in structural health monitoring of civil infrastructures such as bridges, tunnels and buildings. In my thesis research I systematically investigated on various factors that affect the short-term and long-term …

    unsw Repository record for Performance enhancement techniques for Fibre Bragg Grating-based strain sensing systems (opens in a new tab)

  13. Development to a Flexible Surface Acoustic Wave Sensor for Strain Sensing

    … real-time monitoring of dynamic states including strains. SAW sensors are generally fabricated with a rigid piezoceramic substrate, incapable of adapting to highly curved surfaces or flexible objects. The ongoing demands of sensor adaptability with flexible substrates, which is also capable of …

    embry-riddle Repository record for Development to a Flexible Surface Acoustic Wave Sensor for Strain Sensing (opens in a new tab)

  14. MEMS Capacitive Strain Sensing Elements for Integrated Total Knee Arthroplasty Prosthesis Monitoring

    … orthopedic implant. In this research, a novel sensing system has been developed which is capable of fully characterizing three-dimensional strain and stress at a single location.</p> <p>Capacitance-based sensors were chosen to avoid the power loss and drift characteristics typical of resistive …

    utk-theses Repository record for MEMS Capacitive Strain Sensing Elements for Integrated Total Knee Arthroplasty Prosthesis Monitoring (opens in a new tab)

  15. Printable Carbon Nanotube Based Multifunctional Nanocomposites for Strain Sensing and Self-heating

    … a potential for developing a piezo-resistive strain sensor and a resistive heating sheet with a smart structure. Conventional fabrication techniques of CNT based nanocomposites such as molding, casting or spray coating lack the ability to control the geometry and properties of fabricated …

    ucf Repository record for Printable Carbon Nanotube Based Multifunctional Nanocomposites for Strain Sensing and Self-heating (opens in a new tab)

  16. Numerical Modeling and Data Interpretation of Distributed Strain Sensing Measurements during Production

    … reservoirs. Rayleigh Frequency Shift Distributed Strain Sensing (RFS-DSS) has emerged as a promising diagnostic technology for characterizing near-wellbore and far-field fracture geometries during production. However, the mechanisms driving variations in RFS-DSS strain measurements across …

    tamu Repository record for Numerical Modeling and Data Interpretation of Distributed Strain Sensing Measurements during Production (opens in a new tab)

  17. Quasi-Distributed Intrinsic Fabry-Perot Interferometric Fiber Sensor for Temperature and Strain Sensing

    … and low-cost quasi-distributed temperature and strain sensors that can reliably work under harsh environment or in extended structures. There are two main drives for distributed fiber sensor research. The first is to lower cost-per-sensor so that the fiber sensors may become price-competitive …

    vt Repository record for Quasi-Distributed Intrinsic Fabry-Perot Interferometric Fiber Sensor for Temperature and Strain Sensing (opens in a new tab)

  18. Characterization and Size Optimization of Additively Manufactured Flexible Piezoresistive Sensors for Vibration Strain Sensing

    Flexible piezoresistive strain sensors have promising applications in areas such as wearables and soft robotics. For sensing dynamic strains, such as a runner’s gait or a slipping object held by a robotic gripper, these sensors must capably measure strain over a range of amplitudes and frequencies. …

    waterloo Repository record for Characterization and Size Optimization of Additively Manufactured Flexible Piezoresistive Sensors for Vibration Strain Sensing (opens in a new tab)

  19. Temperature and strain sensing using rare earth fluorescence and Bragg gratings in optical fibres

    … describes the study of the temperature and strain effects on rare earth fluorescence and Bragg gratings in optical fibres. The development and performance of simultaneous temperature and strain measurement systems utilising a combined technique of the fluorescence intensity ratio and the …

    vu-aus Download PDF for Temperature and strain sensing using rare earth fluorescence and Bragg gratings in optical fibres (opens in a new tab)

Page 1 of 11