Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"Stratasys"”.

  1. Automated Loading and Unloading of the Stratasys FDM 1600 Rapid Prototyping System

    … unload the FDM 1600 rapid prototyping system (Stratasys, Inc.). The modifications made to the FDM 1600 system are minimal. The door to the FDM 1600 build chamber is removed, and the .SML build files that are used to drive the FDM 1600 are modified at both ends to facilitate synchronized …

    vt Repository record for Automated Loading and Unloading of the Stratasys FDM 1600 Rapid Prototyping System (opens in a new tab)

  2. Vyrobení vzorku součásti aditivní technologií

    … byla 3D tiskárna Solido SD 300 Pro, 3D tiskárna Stratasys uPrint a 5osá frézka Hermle C20U. Nejvýhodnější použitou technologií pro výrobu jednoho prototypu byl tisk na 3D tiskárně Stratasys uPrint.

    brno-tech Repository record for Vyrobení vzorku součásti aditivní technologií (opens in a new tab)

  3. Open-source conversion of Stratasys FDM Vantage X rapid-prototyping machine : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Albany, New Zealand

    … and concepts. WDTL suffered a failure of a Stratasys FDM Vantage X machine used to 3D print prototype parts. The cost of rectifying the problem put the machine beyond economic repair. The machine was therefore gifted to Massey University, Albany. Mechanically the machine was in good working …

    massey Repository record for Open-source conversion of Stratasys FDM Vantage X rapid-prototyping machine : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Albany, New Zealand (opens in a new tab)

  4. Analysis of accuracy and mechanical properties of 3D-printed polymeric dental materials

    … M2 (DPR10), HeyGears A2D4K (Model HP UV2.0), Stratasys J5 (MED610), Stratasys Origin One (DM200), Envision One (E-Model LightDLP), and Asiga Pro4K (VeriModel) with a standard layer thickness of 50 μm (N=72). The models were scanned after printing using Sirona inEOS X5 scanner, while the …

    bu Repository record for Analysis of accuracy and mechanical properties of 3D-printed polymeric dental materials (opens in a new tab)

  5. Návrh a výroba oční protézy 3D tiskem

    … využita aditivní technologie PolyJet a tiskárna Stratasys J750. Vytištěné jádro bylo za účelem vytvoření biokompatibilního povrchu zalito do čirého akrylátu. Práce byla ukončena diskuzí, kde byly popsány problematické kroky výroby, provedena ekonomická analýza a navrhnut postup na budoucí výrobu …

    brno-tech Repository record for Návrh a výroba oční protézy 3D tiskem (opens in a new tab)

  6. Držák plastových strun pro profesionální technologii 3D tisku FDM

    … je primárně určen pro profesionální tiskárnu Stratasys Dimension SST 1200. Práce se dělí na konstrukční část, jež spočívá v konstrukci všech použitých dílů, a elektronickou část, která řeší program zajišťující definované funkce držáku strun. Elektronická část spočívá v propojení sensorů a …

    brno-tech Repository record for Držák plastových strun pro profesionální technologii 3D tisku FDM (opens in a new tab)

  7. DESIGN AND PERFORMANCE ASSESSMENT OF A MODULAR ADDITIVE MANUFACTURED AXISYMMETRIC MACH 5+ HYPERSONIC TUNNEL

    … Tunnel components were manufactured using the Stratasys F900 printer and assembled using commercially available fasteners and sealing methods. Experimental testing demonstrated sustained Mach 5.38 flow for approximately two minutes with the flow heated to 440 K upstream of the plenum chamber. …

    nps Repository record for DESIGN AND PERFORMANCE ASSESSMENT OF A MODULAR ADDITIVE MANUFACTURED AXISYMMETRIC MACH 5+ HYPERSONIC TUNNEL (opens in a new tab)

  8. Cost model for commercially-available additive manufacturing machines

    … Vanguard SLS, 3D Systems SLA 5000, and the Stratasys J750 Digital Anatomy Printer additive machines. To provide quotes for parts and obtain build-specific information for the aforementioned processes, an open-source software program is developed along with the cost models for each individual …

    texas Repository record for Cost model for commercially-available additive manufacturing machines (opens in a new tab)

  9. Development of 3D Printed Patient Specific Vascular Models to Accurately Replicate Hemodynamics and Simulate Interventional Procedures

    … addition of flexible photoresins, such as the Stratasys Tango family (Stratasys, Eden Prairie, MN) and the Visijet 3D Systems family (3D Systems, Rock Hill, SC). When combined with multi-material 3DP capability, this may allow development of vascular models where the mechanical properties of …

    buffalo Repository record for Development of 3D Printed Patient Specific Vascular Models to Accurately Replicate Hemodynamics and Simulate Interventional Procedures (opens in a new tab)

  10. Viability Study of Nylon-12 Carbon Fiber Filaments for Use in the Construction of a Powered Lower Body Exoskeleton via Fused Deposition Modeling by Means of Computer Simulation

    … used to give the device the characteristics of Stratasys' nylon 12 carbon fiber FDM material to verify it if could be used as the primary construction material for this device when extruded from a FDM printer on either the XZ or ZX printing plane. From the simulations it was found that the …

    unt Repository record for Viability Study of Nylon-12 Carbon Fiber Filaments for Use in the Construction of a Powered Lower Body Exoskeleton via Fused Deposition Modeling by Means of Computer Simulation (opens in a new tab)

  11. Repeatability Case Study of the 3D Printer in the School of Engineering and Applied Science Lab

    … 3D printers on campus. One of those printers, a Stratasys (model: BST 768/SST 768), is in the Senator Mitch McConnell Advanced Manufacturing and Robotics Laboratory. The researcher used this printer for the study to determine if the location of the printer influenced the final product. The …

    wku-diss Repository record for Repeatability Case Study of the 3D Printer in the School of Engineering and Applied Science Lab (opens in a new tab)

  12. Development of a fully digital workflow for fabricating custom nasoalveolar molding appliances

    … SolidWorks and fabricated using SprintRay and Stratasys J850 Digital Anatomy printers with material customization for intraoral and nasal components. Results: Superimposition analysis demonstrated high dimensional accuracy of intraoral scans, with deviations of less than 0.5 mm in clinically …

    umn Repository record for Development of a fully digital workflow for fabricating custom nasoalveolar molding appliances (opens in a new tab)

  13. Modeling and validations of control parameters for material extrusion-based additive manufacturing of thixotropic aluminum alloys.

    … especially using low melting alloys. Recently Stratasys Inc. submitted a patent application for the use of their Material Extrusion technology also called Fused Deposition Modeling (FDM) where they describe the process using thixotropic semi-solid alloys. Currently this process using …

    louisville Repository record for Modeling and validations of control parameters for material extrusion-based additive manufacturing of thixotropic aluminum alloys. (opens in a new tab)

  14. Segmentation of Spinal Computed Tomography to Produce Biomechanically Accurate Patient-Specific Surgical Models

    … MeshMixer for model smoothing. 3D-printing, with Stratasys J750™, specialized for anatomical modeling, integrates materials simulating human anatomy, including bone structures, soft tissues, and intervertebral discs. Quantitative material testing was completed on samples of each printed tissue …

    buffalo Repository record for Segmentation of Spinal Computed Tomography to Produce Biomechanically Accurate Patient-Specific Surgical Models (opens in a new tab)

  15. A Hybrid Data-Driven Methodology to Determine Additive Manufacturing Process Parameters

    … trademarked Fused Deposition Modeling (FDM) by Stratasys, focusing on determining manufacturing parameters to achieve the desired product properties. In FDM, the properties of the end product are influenced by both the filament material and the FDM processing or machine parameters, including …

    buffalo Repository record for A Hybrid Data-Driven Methodology to Determine Additive Manufacturing Process Parameters (opens in a new tab)

  16. Development of Patient Based 3D Printed Cardiac Mitral Valve Phantoms

    … Iterations of the phantom were 3D printed on a Stratasys J750 Digital Anatomy Printer and an Objet Eden 260V 3D printer in various elastic and support materials. Post print support material required 5 to 9-day continuous agitation in basic sodium hydroxide (NaOH) baths to gradually dissolve …

    buffalo Repository record for Development of Patient Based 3D Printed Cardiac Mitral Valve Phantoms (opens in a new tab)

  17. Design and Mechanical Characterization of Functionally Graded Sandwich Beams Fabricated via Additive Manufacturing

    … manufactured using a poly-jet printer (Stratasys J55). The flexural modulus and strength of the additively manufactured sandwich beams are measured by the three-point bend test method. The experimental results clearly match the analytical and numerical estimations.

    ucf Repository record for Design and Mechanical Characterization of Functionally Graded Sandwich Beams Fabricated via Additive Manufacturing (opens in a new tab)

  18. Designing Customized 3D Printed Models for Surgical Planning in Repair of Congenital Heart Defects

    … reconstruction. The models were printed on a Stratasys Connex3 Object260 printer using Tango Plus flexible material to allow surgical suturing. Although some models were segmented from CT acquired data, emphasis was placed on establishing methods for utilizing 3D ultrasound derived data. This …

    jhu Repository record for Designing Customized 3D Printed Models for Surgical Planning in Repair of Congenital Heart Defects (opens in a new tab)

  19. Effects of Conformal Cooling Channels on Additively Manufactured Injection Molding Tooling

    … a benchmark mold out of Digital ABS produced by Stratasys, an acrylic based photopolymer, which was then used to produce injection molded parts until tool failure. Another, more cost-effective material, High Temp Resin produced by Formlabs, another acrylic based photopolymer, was also tested but …

    byu Repository record for Effects of Conformal Cooling Channels on Additively Manufactured Injection Molding Tooling (opens in a new tab) Download PDF for Effects of Conformal Cooling Channels on Additively Manufactured Injection Molding Tooling (opens in a new tab)

  20. An Experimental Investigation of Polymer Additive Manufacturing

    … deposition additive manufacturing machines, Stratasys SST 1200es and Creality CR-10. The AM parts were built on flat and on edge side at different build orientations. The influence of the manufacturing parameters on the mechanical properties of AM components were investigated. This includes …

    carleton Repository record for An Experimental Investigation of Polymer Additive Manufacturing (opens in a new tab)

Page 1 of 2