Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 186 for “"Strength Analysis"”.

  1. Strength analysis of seaweed cultivation module /

    This master thesis is an attempt to a new approach in seaweed cultivation module that is attempted by an industry UAB Metal Production, Lithuania. With the support from Metal Production and Siauliai University it was tried to study and understand how the module made of PE80 will work under given …

    vilnius Repository record for Strength analysis of seaweed cultivation module / (opens in a new tab)

  2. Ultimate strength analysis of stiffened plate structures

    … analytically and by non-linear finite element analysis. The method employed was to systematically alter the geometry used in the benchmark study and then observe the changes that influenced the results. The ultimate capacity of some of these models was also calculated by implementing existing …

    chalmers Repository record for Ultimate strength analysis of stiffened plate structures (opens in a new tab)

  3. Crush Strength Analysis of Hollow Glass Microspheres

    … Microsphere diameter is a major factor affecting strength as well as the Weibull parameters. Two different methods, microscopy counting and laser light scattering, used in the research yielded similar distributions. The main objective of this research was to analyze the crush strength of …

    vt Repository record for Crush Strength Analysis of Hollow Glass Microspheres (opens in a new tab)

  4. Three dimensional ultimate strength analysis of beam-columns.

    … including sectorial warping effects. The analysis incorporates the effect of initial geometrical deflections. Different patterns of residual stress, non-coincidence of the shear centre and centroid, a complete absence of symmetry in the section and the influence of higher order terms in …

    whiterose Download PDF for Three dimensional ultimate strength analysis of beam-columns. (opens in a new tab)

  5. Strength analysis and failure prediction of glass adhesive joints

    … cases examined. It was also observed that lower strength ductile adhesive (in terms of bulk properties) produced joints with higher failure loads. Numerical analyses showed that ductile adhesives developed a large plastic zone and redistributed the stress concentrations more effectively from the …

    soton Download PDF for Strength analysis and failure prediction of glass adhesive joints (opens in a new tab)

  6. Strength analysis for understanding structural relaxations in food materials

    … A new approach uses a simple structural “strength” concept. Strength uses modeling of structural relaxation times for single and multicomponent amorphous solid systems around measured glass transition to translate experimental relaxation times data to a practically meaningful critical …

    cork Repository record for Strength analysis for understanding structural relaxations in food materials (opens in a new tab)

  7. Transmission grid strength analysis and operation of inverter-based microgrids

    … work focuses on evaluating transmission system strength and operation of microgrids with inverter-interfaced resources. The strength of the transmission grid with large wind farms is investigated based on the voltage phase angle stability. A novel approach for evaluating the strength of …

    texas Repository record for Transmission grid strength analysis and operation of inverter-based microgrids (opens in a new tab)

  8. Ultimate Strength Analysis of Stiffened Panels Using a Beam-Column Method

    … the current research for studying the ultimate strength problems of stiffened panels with two load cases: 1) under longitudinal compression, and 2) under transverse compression. Chapter 2 presents an improved step-by-step numerical integration procedure based on (Chen and Liu, 1987) to calculate …

    vt Repository record for Ultimate Strength Analysis of Stiffened Panels Using a Beam-Column Method (opens in a new tab)

  9. Ultimate strength analysis of partially composite and fully composite open-web steel joists

    … experiments are used to evaluate the flexural strength and associated failure modes of partially composite and fully composite joists. The results of each test are compared to theoretical calculations based on an ultimate strength flexural model. The joists are classified by how the provided …

    vt Repository record for Ultimate strength analysis of partially composite and fully composite open-web steel joists (opens in a new tab)

  10. Validation of the ULSAP Closed-Form Method for Ultimate Strength Analysis of Cross-Stiffened Panels

    … of 67 ABAQUS elasto-plastic Riks ultimate strength analyses of cross-stiffened panels. These panels cover a wide range of typical geometries. Uniaxial compression is applied to the panels, and in some cases combined with lateral pressure. For eight of the panels full-scale experimental …

    vt Repository record for Validation of the ULSAP Closed-Form Method for Ultimate Strength Analysis of Cross-Stiffened Panels (opens in a new tab)

  11. Notched strength analysis of tensile specimens taken from a thick, filament-wound graphite/epoxy pressure vessel

    An experimental analysis of specimens taken from a thick, filament-wound composite material pressure vessel (cylinder) was performed by testing tensile coupons with various semi-elliptical surface notches. The strength of specimens with small notches was found to be notch insensitive. The strength …

    vt Repository record for Notched strength analysis of tensile specimens taken from a thick, filament-wound graphite/epoxy pressure vessel (opens in a new tab)

  12. Stress-Function Variational Method and Its Applications in the Strength Analysis of Bonded Joints and Hard Coatings

    … have been available in the literature for joint strength analysis and structural design. Yet, a few deficiencies still exist in most of these models in accurate prediction of joint stresses, including the violation of the generalized Hooke's law of the adhesive layers and failure to satisfy the …

    ndsu Repository record for Stress-Function Variational Method and Its Applications in the Strength Analysis of Bonded Joints and Hard Coatings (opens in a new tab)

  13. Geotechnical Properties Of the Travis Peak (Hosston) Formation in East Texas: A Compressive and Tensile Strength Analysis using Regression Analysis.

    <p>The estimation of rock mass strength is a key parameter in geotechnical engineering which is used in the design of geotechnical structures like tunnels, dams and slopes. Geotechnical engineering is the branch of civil engineering which works on the principles of soil and rock mechanics to …

    sfasu Repository record for Geotechnical Properties Of the Travis Peak (Hosston) Formation in East Texas: A Compressive and Tensile Strength Analysis using Regression Analysis. (opens in a new tab)

  14. The strength of glulam beams with holes - A probabilistic fracture mechanics method and experimental tests

    … deals with experimental tests and methods for strength analysis of glulam beams with holes. Test results and methods for strength analysis available in literature are compiled and discussed. The methods considered comprise both code strength design methods and more general methods for strength …

    lund Repository record for The strength of glulam beams with holes - A probabilistic fracture mechanics method and experimental tests (opens in a new tab) Download PDF for The strength of glulam beams with holes - A probabilistic fracture mechanics method and experimental tests (opens in a new tab)

Page 1 of 10