Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"Strength Reduction Factor"”.

  1. Re-Evaluation of the CSA S304 Concrete Masonry Flexural Compressive Strength Reduction Factor

    … the inclusion and maintenance of the χ-factor in Clauses 10.2.6 and 11.2.1.6 of the CSA S304 Design of Masonry Structures to reduce the flexural compressive strength when the internal compressive stress acts perpendicular to the head joint. The results from recent research conducted …

    sask Repository record for Re-Evaluation of the CSA S304 Concrete Masonry Flexural Compressive Strength Reduction Factor (opens in a new tab)

  2. Evaluation of Strength Reduction Factor for Concentrically Braced Frames Based on Nonlinear Single Degree-of-Freedom Systems

    Strength Reduction Factor (R-Factor), often referred to as Response Modification Factor, is commonly used in the design of lateral force resisting systems under seismic loading. R-Factors allow for a reduction in design base shear demands, leading to more economical designs. The reduction of …

    calpoly Repository record for Evaluation of Strength Reduction Factor for Concentrically Braced Frames Based on Nonlinear Single Degree-of-Freedom Systems (opens in a new tab)

  3. Algorithms for increased efficiency of finite element slope stability analysis

    … uses a bisectional algorithm to arrive at a factor of safety. However, several inefficiencies have been identified in the bisectional algorithm as it is applied to slope stability analysis. Among them are the high computational costs of failing to converge. Several algorithms were proposed to …

    colo-mines Repository record for Algorithms for increased efficiency of finite element slope stability analysis (opens in a new tab)

  4. Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών διασυνδεδεμένων πλαισίων με χρήση τριών νέων μεθόδων

    … ratios, while the second makes use of modal strength reduction factors resulting from the corresponding modal damping ratios. The basic idea of first two design method is related to the creation of an equivalent linear MDOF structure that is able to respond in a similar way to the …

    greece Repository record for Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών διασυνδεδεμένων πλαισίων με χρήση τριών νέων μεθόδων (opens in a new tab)

  5. Long-Term behavior of FRP-strengthened RC Beams

    … long-term deflection, crack width and residual strength of RC beams strengthened with glass FRP system. The effect of three major actions such as sustained loading, cyclic loading and tropical weathering were investigated. Deflections and crack widths of RC beams were found effectively …

    nus Repository record for Long-Term behavior of FRP-strengthened RC Beams (opens in a new tab) Download file for Long-Term behavior of FRP-strengthened RC Beams (opens in a new tab)

  6. Flexural Behavior of CFRP-Pretensioned Girders

    … of loading cycles. The combination of these factors can result in deterioration of highway bridge beams’ serviceability and strength. Beams prestressed with steel are susceptible to corrosion when subjected to environmental exposure. The corrosion of the prestressing steel reduces the beams’ …

    houston Repository record for Flexural Behavior of CFRP-Pretensioned Girders (opens in a new tab)

  7. Resistance Factor for Cold-Formed Steel Compression Members

    This research investigates if the LRFD strength reduction factor for cold-formed steel compression members can be increased above its current value of Ï c = 0.85, which was established by the LRFD Cold-Formed Steel Design Manual (1991) on the basis of 264 column tests. The resistance factor in the …

    vt Repository record for Resistance Factor for Cold-Formed Steel Compression Members (opens in a new tab)

  8. Shear Strength of Full-Scale Prestressed Lightweight Concrete Girders with Composite Decks

    … deal of uncertainty as to how to calculate the strength of this material when designing for shear in beams. Design codes tend to penalize lightweight concrete due to its lower tensile strength and smoother interface along the shear cracks. In this study, there were twelve tests on six …

    vt Repository record for Shear Strength of Full-Scale Prestressed Lightweight Concrete Girders with Composite Decks (opens in a new tab)

  9. Effect of Cage Eccentricity on Moment Capacity of Drilled Shafts

    … capacity of drilled shafts and propose new strength reduction and resistance factors for tension-controlled failure in drilled shafts. A total of 208 drilled shafts across eleven counties within the state of Florida were tested using thermal integrity profiling to identify the worst case …

    usf Repository record for Effect of Cage Eccentricity on Moment Capacity of Drilled Shafts (opens in a new tab)

  10. Análise numérica da estabilidade de talude natural sob diferentes condições pluviométricas e de fraturamento do maciço rochoso subjacente

    … unsaturated behaviour of the soil and the Shear Strength Reduction (SSR) method to determine the factor of safety, expressed by the Strength Reduction Factor (SRF). Seven rainfall scenarios were analysed, defined from different temporal distributions and probabilities of occurrence of landslides …

    brazil-uerj Repository record for Análise numérica da estabilidade de talude natural sob diferentes condições pluviométricas e de fraturamento do maciço rochoso subjacente (opens in a new tab)

  11. Flexural Behavior and Design Of Post-Tensioned Beams With Prestressing CFRP System

    … has been widely used in the construction and strengthening of prestressed highway bridge girders. It provides structural integrity, control of cracks, deflection and camber, thinner structural members, and profiled tendons. The high ductility, elastic modulus, and strength of prestressing …

    houston Repository record for Flexural Behavior and Design Of Post-Tensioned Beams With Prestressing CFRP System (opens in a new tab)

  12. Irregular Welded Rectangular Hollow Section Truss-type Connections

    … other geometric parameters. By comparing the strength of longitudinally offset models and corresponding control models, a required minimum chord end distance is proposed, along with a strength reduction factor in case the minimum end distance is not satisfied. For laterally offset …

    toronto-retro Repository record for Irregular Welded Rectangular Hollow Section Truss-type Connections (opens in a new tab)

  13. Reliability models for circular concrete columns

    … reliability based calibration for new strength reduction factor were studied in this dissertation The latest statistical data were used in the calibration procedure. Rational strength reduction factors corresponding to load and load-combination factors specified by ASCE 7-02 and adopted …

    nebraska Repository record for Reliability models for circular concrete columns (opens in a new tab)

  14. Relative Humidity Effects on the Compression Strength of Corrugated Boxes

    … in a decrease in the top-to-bottom compression strength of corrugated boxes. Therefore, understanding the moisture effect on box compression strength is essential. The goal of this study is to characterize the effect of relative humidity and, subsequently, the effects of moisture content on the …

    clemson Repository record for Relative Humidity Effects on the Compression Strength of Corrugated Boxes (opens in a new tab)

  15. Comparison of Informed and Un-Informed Shear Strength Reduction Procedures for Finite Element Method Slope Stability Analysis

    … of these analyses is typically to determine a Factor of Safety (FoS) like that obtained using Limit Equilibrium Methods (LEM). To compute the FoS, Shear Strength Reduction (SSR) techniques are commonly employed. The SSR procedure involves the systematic computation of elastic-plastic FEM slope …

    queens Repository record for Comparison of Informed and Un-Informed Shear Strength Reduction Procedures for Finite Element Method Slope Stability Analysis (opens in a new tab)

  16. Reliability-based durability assessment of GFRP bars for reinforced concrete

    … the application of environmental and flexural strength reduction factors, which have minimal experimental validation. Our goal in this research is the development of a Monte Carlo simulation to assess the durability of glass fiber reinforced polymer (GFRP) reinforced concrete designed for …

    vt Repository record for Reliability-based durability assessment of GFRP bars for reinforced concrete (opens in a new tab)

  17. Strength and Behavior of Advanced High Strength Steel Structural Components

    Advanced High Strength Steel (AHSS) is the next generation of steel for cold-formed steel (CFS) construction. With the superior strength of AHSS, the design space of CFS structures can be greatly extended, leading to improved efficiency and less steel consumption in construction. A research …

    jhu Repository record for Strength and Behavior of Advanced High Strength Steel Structural Components (opens in a new tab)

  18. Flexural Strength, Ductility, and Serviceability of Beams that Contain High-Strength Steel Reinforcement and High-Grade Concrete

    … the concrete construction industry including a reduction of congestion, improved concrete placement, reduction in the required reinforcement and cross sections which would lead to savings in materials, shipping, and placement costs. Using high-strength reinforcement is expected to impact the …

    portland-state Repository record for Flexural Strength, Ductility, and Serviceability of Beams that Contain High-Strength Steel Reinforcement and High-Grade Concrete (opens in a new tab)

  19. Comparison and Analysis of the Strength, Stiffness, and Damping Characteristics of Concrete with Rubber, Latex, and Carbonate Additives

    … the fine aggregate to measure their effects on strength, stiffness, damping, and air content. The additives included rubber particles from recycled tires, calcium carbonate particles, styrene butadiene rubber (SBR) latex, and a commercially available product named ConcreDamp which contains …

    vt Repository record for Comparison and Analysis of the Strength, Stiffness, and Damping Characteristics of Concrete with Rubber, Latex, and Carbonate Additives (opens in a new tab)

  20. Design and Behavior of Composite Steel-Concrete Flexural Members with a Focus on Shear Connectors

    … consider effect of degree of shear connection on strength reduction factor is proposed. Finally, while basic analysis theories between the two are similar, requirements for determining the strength of composite beams in Eurocode 4 (CEN 1992) and 1999 AISC Specification (AISC 1999) differ in many …

    vt Repository record for Design and Behavior of Composite Steel-Concrete Flexural Members with a Focus on Shear Connectors (opens in a new tab)

Page 1 of 2