Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Strength Reduction Factors"”.

  1. Time-Dependent Reliability Framework for Durability Design of FRP Composites

    … in an approved or consistent format. Loss of strength over time or aging of any structural material should be of concern to engineers as the in-service lifespan of many engineering structures is expected to exceed 100 years. Use of durability strength-reduction factors or factors of safety …

    wvu Repository record for Time-Dependent Reliability Framework for Durability Design of FRP Composites (opens in a new tab)

  2. Web crippling behaviour of cold-formed steel sections with circular web openings under one-flange loading

    … techniques, the material thickness and strength of channel section is increased but research on the cold-formed steel members with web openings is limited. Therefore, the behaviour and design of cold-formed steel channel members with web openings are investigated in this study. …

    qu-belfast Repository record for Web crippling behaviour of cold-formed steel sections with circular web openings under one-flange loading (opens in a new tab) Download PDF for Web crippling behaviour of cold-formed steel sections with circular web openings under one-flange loading (opens in a new tab)

  3. Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών πλαισίων με ιδιομορφικούς συντελεστές συμπεριφοράς και τρεις στάθμες επιτελεστικότητας

    … ratios. With the aid of these spectra, the strength reduction factors different for each mode can be computed. Since the seismic records have been properly scaled, the modal damping ratios and the modal strength reduction factors correspond to the performance levels of the SEAOC2000 or the …

    greece Repository record for Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών πλαισίων με ιδιομορφικούς συντελεστές συμπεριφοράς και τρεις στάθμες επιτελεστικότητας (opens in a new tab)

  4. Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών διασυνδεδεμένων πλαισίων με χρήση τριών νέων μεθόδων

    … ratios, while the second makes use of modal strength reduction factors resulting from the corresponding modal damping ratios. The basic idea of first two design method is related to the creation of an equivalent linear MDOF structure that is able to respond in a similar way to the …

    greece Repository record for Αντισεισμικός σχεδιασμός επίπεδων μεταλλικών διασυνδεδεμένων πλαισίων με χρήση τριών νέων μεθόδων (opens in a new tab)

  5. Shear behavior of post-tensioned girder containing grouted and ungrouted ducts

    … Design Specifications (AASHTO), include shear strength reduction factors to account for the presence of the duct in the web and its condition, grouted or ungrouted. These factors are applied to the shear resistance provided by the concrete component, as well as to the shear resistance provided …

    texas Repository record for Shear behavior of post-tensioned girder containing grouted and ungrouted ducts (opens in a new tab)

  6. Reliability models for circular concrete columns

    … reliability based calibration for new strength reduction factor were studied in this dissertation The latest statistical data were used in the calibration procedure. Rational strength reduction factors corresponding to load and load-combination factors specified by ASCE 7-02 and adopted …

    nebraska Repository record for Reliability models for circular concrete columns (opens in a new tab)

  7. Effect of superposition of stress raisers on axial-load fatigue strength

    … California, to evaluate the effects on fatigue strength caused by the superposition of two stress-raisers. The cases of reversed bending and torsion have been previously considered. This paper continues the investigation for axial tension of a thin flat plate of finite width. The stress raisers …

    nps Repository record for Effect of superposition of stress raisers on axial-load fatigue strength (opens in a new tab)

  8. Reliability-based durability assessment of GFRP bars for reinforced concrete

    … the application of environmental and flexural strength reduction factors, which have minimal experimental validation. Our goal in this research is the development of a Monte Carlo simulation to assess the durability of glass fiber reinforced polymer (GFRP) reinforced concrete designed for …

    vt Repository record for Reliability-based durability assessment of GFRP bars for reinforced concrete (opens in a new tab)

  9. DESIGN FRAMEWORK FOR CIRCULAR TUNNELS WITH CEMENT-ADMIXED SOIL SURROUNDS

    … of spatial variability and heterogeneity in the strength and stiffness of cement-treated soils is examined by using random finite element analysis. Finally, the degradation in stability due to spatial variability is quantified in terms of the design strength ratios and strength reduction factors.

    nus Repository record for DESIGN FRAMEWORK FOR CIRCULAR TUNNELS WITH CEMENT-ADMIXED SOIL SURROUNDS (opens in a new tab) Download file for DESIGN FRAMEWORK FOR CIRCULAR TUNNELS WITH CEMENT-ADMIXED SOIL SURROUNDS (opens in a new tab)

  10. Strength Calculation Model for Standoff Screws in Composite Joists

    … 8 standoff screws. The goal is to develop a strength prediction equation and determine reliability parameters compatible with the Load Factor Resistance Design (LRFD) procedure that would allow the use of this shear connector in design of composite floor systems. The study considers results …

    vt Repository record for Strength Calculation Model for Standoff Screws in Composite Joists (opens in a new tab)

  11. Microstructural Characterisation of Structural Bolt Assemblies in Fire

    … design uses the temperature-dependent bolt strength-reduction factors prescribed in Eurocode 3, despite the existence of two distinct failure modes under tension; bolt breakage, and thread-stripping. This thesis investigates the factors which influence failure modes at ambient and elevated …

    whiterose Download PDF for Microstructural Characterisation of Structural Bolt Assemblies in Fire (opens in a new tab)

  12. Shear Strength of Full-Scale Prestressed Lightweight Concrete Girders with Composite Decks

    … deal of uncertainty as to how to calculate the strength of this material when designing for shear in beams. Design codes tend to penalize lightweight concrete due to its lower tensile strength and smoother interface along the shear cracks. In this study, there were twelve tests on six …

    vt Repository record for Shear Strength of Full-Scale Prestressed Lightweight Concrete Girders with Composite Decks (opens in a new tab)

  13. The effect of geometrical imperfections on the strength of OCTG

    … that these geometrical imperfections have on the strength of OCTG, which is a concern for both casing and tubing designers and tubular manufacturers. Eccentricity between the pipe outside and inside diameter, ovality of the pipe cross-section and lack of longitudinal straightness are the common …

    rice Repository record for The effect of geometrical imperfections on the strength of OCTG (opens in a new tab)

  14. Web crippling behaviour of cold-formed steel member with web openings

    … element analyses is obtained in terms of both strength and failure modes. The finite element model is then used for the purpose of a parametric study on the effect of different sizes and position of holes in the web. It is demonstrated that the main factors influencing the web crippling …

    strathclyde Repository record for Web crippling behaviour of cold-formed steel member with web openings (opens in a new tab)

  15. Durability of GFRP Composites under Harsh Environments: Effect of pH and Temperature

    … to obtain the long-term degradation curves and strength reduction factors for design purposes.;In this work, a comprehensive literature review was performed to collect accelerated and natural aging data for glass fiber reinforced composites. Various methodologies were employed to normalize the …

    wvu Repository record for Durability of GFRP Composites under Harsh Environments: Effect of pH and Temperature (opens in a new tab)

  16. Relative Humidity Effects on the Compression Strength of Corrugated Boxes

    … in a decrease in the top-to-bottom compression strength of corrugated boxes. Therefore, understanding the moisture effect on box compression strength is essential. The goal of this study is to characterize the effect of relative humidity and, subsequently, the effects of moisture content on the …

    clemson Repository record for Relative Humidity Effects on the Compression Strength of Corrugated Boxes (opens in a new tab)

  17. Performance of Timber-to-Steel Bolted Connections Exposed to Fire

    … B for large-cross-section wood elements and strength reduction factors at elevated temperatures from CSA S16’s Annex K for steel elements. The predictions of fire resistance using the empirical calculation method can accurately estimate the fire resistance of both WSW and SWS connections.

    carleton Repository record for Performance of Timber-to-Steel Bolted Connections Exposed to Fire (opens in a new tab)

  18. Strengthening of Unreinforced Masonry Walls using ECC Shotcrete

    … strain-hardening characteristic, for the seismic strengthening of unreinforced masonry structures. Additionally, the feasibility of utilising ECC shotcrete as a chloride resistant cover concrete to improve the service life of reinforced concrete structures was examined. A series of laboratory …

    auckland-ms Repository record for Strengthening of Unreinforced Masonry Walls using ECC Shotcrete (opens in a new tab)

  19. Behavior of bolted connections during and after a fire

    … program, which provide useful information on the strength of bolted connection at elevated temperature. Shear strength of A325 and A490 high strength bolts were studied with double shear tests performed at different temperature levels, from ambient temperature to 1500°F. It was found that both …

    texas Repository record for Behavior of bolted connections during and after a fire (opens in a new tab)

Page 1 of 2