Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 57 for “"Strength Retention"”.

  1. An Analysis of Strength Retention During an Eight-Week Walk/Jog Training Program

    … effects of an eight-week walk/jog program upon strength retention. Twenty-four male executives from Dallas, Texas represented the sample size Following eight weeks of resistive training, all subjects were pretested for strength and endurance measures. After the eight-week walk/jog program, all …

    unt Repository record for An Analysis of Strength Retention During an Eight-Week Walk/Jog Training Program (opens in a new tab)

  2. A Comparison of Two Groups of College Men, Isometrically and Isotonically Trained, With Respect to Strength Retention

    … was to determine the difference, if any, in the retention of strength obtained by taking part in a weight-training program of exercises opposed to a program of isometric exercises. The subjects selected for this study were freshman and sophomore male students at the University of North Dakota …

    nodak Repository record for A Comparison of Two Groups of College Men, Isometrically and Isotonically Trained, With Respect to Strength Retention (opens in a new tab)

  3. The effects of four strength maintenance programs on the dynamic strength retention of football players during the in-season

    … of this study are (1) to determine whether strength training during the in-season is beneficial for dynamic strength retention purposes, and (2) to determine which type of strength training program is most effective in maintaining dynamic strength levels acquired during the off-season as …

    u-pacific Repository record for The effects of four strength maintenance programs on the dynamic strength retention of football players during the in-season (opens in a new tab)

  4. A comparison of two weight training programs for strength development and the effects of spring football practice on strength retention

    … possible effects of spring football practice on strength retention among the varsity football players at the University of the Pacific as measured by the four strength tests from Edwin A. Fleishman’s Basic Fitness Test Battery for Evaluation of Physical Fitness Factors; the one repetition maximum …

    u-pacific Repository record for A comparison of two weight training programs for strength development and the effects of spring football practice on strength retention (opens in a new tab)

  5. Micro and Molecular Phase Modulation for Long-Lasting Absorbable, Compliant Polymers for Orthopedic Applications

    … fail to meet the combined requirements of long strength retention, tensile strength, and flexibility, a solution may be achieved by incorporating the strength of poly(lactide) (PLLA) and the flexibility of poly(ε-caprolactone) without reducing the strength retention profile of the construct. To …

    clemson Repository record for Micro and Molecular Phase Modulation for Long-Lasting Absorbable, Compliant Polymers for Orthopedic Applications (opens in a new tab)

  6. Reliability-based durability assessment of GFRP bars for reinforced concrete

    … the application of environmental and flexural strength reduction factors, which have minimal experimental validation. Our goal in this research is the development of a Monte Carlo simulation to assess the durability of glass fiber reinforced polymer (GFRP) reinforced concrete designed for …

    vt Repository record for Reliability-based durability assessment of GFRP bars for reinforced concrete (opens in a new tab)

  7. Strength and Durability of Plastic Clays Treated with Cement or Lime

    … cement to that of lime for improving the strength and durability of plastic clays. The scope of work associated with this research involved laboratory strength and durability testing of three plastic clays treated with portland cement or lime. To ensure a broad application of the work, the …

    byu Repository record for Strength and Durability of Plastic Clays Treated with Cement or Lime (opens in a new tab) Download PDF for Strength and Durability of Plastic Clays Treated with Cement or Lime (opens in a new tab)

  8. Strength Degradation of Gfrp Bars

    … objective of this research was to examine the strength degradation of Glass Fiber Reinforced Polymer (GFRP) bars at high temperature and alkalinity and determine if an Arrhenius type relationship can be used as a means of projecting life. The work done includes a thorough literature review, …

    vt Repository record for Strength Degradation of Gfrp Bars (opens in a new tab)

  9. Evaluation of Moisture Damage in Warm Mix Asphalt Containing Recycled Asphalt Pavement

    … AASHTO T283 freeze and thaw (F-T) tensile strength ratio (TSR), Superpave indirect tensile test (IDT) with F-T and MIST conditioning, and Asphalt Pavement Analyzer (APA) Hamburg wheel tracking tests were utilized to evaluate asphalt mixtures.</p> <p>Moisture tests indicated that with the …

    ut-knoxville Repository record for Evaluation of Moisture Damage in Warm Mix Asphalt Containing Recycled Asphalt Pavement (opens in a new tab)

  10. Reaction processing for the development of ultra-high temperature ceramics

    … that exceed 3000⁰C, the potential for strength retention at elevated temperatures, and moderate oxidation resistance when compared to high temperature carbides. However, diborides have often been reported to exhibit low strength and significant strength degradation by 1500⁰C; therefore, …

    must-thes Repository record for Reaction processing for the development of ultra-high temperature ceramics (opens in a new tab)

  11. The Lateral and Post-Impact Residual Lateral Strength of Reinforced Concrete Columns

    … performance and lateral load capacity retention. From these tests it was determined that the CFST specimens exhibited both the largest lateral and residual lateral capacities of 37.37 kN and 40.17 kN, respectively. The CFST member had the highest retention of lateral load capacity for …

    carleton Repository record for The Lateral and Post-Impact Residual Lateral Strength of Reinforced Concrete Columns (opens in a new tab)

  12. CMZP and Mg-doped Al2TiO5 Thin film Coatings for High Temperature Corrosion Protection of Si3N4 Heat Exchangers

    … tests indicated better corrosion resistance and strength retention for CMZP coated Si3N4 compared to as received and Mg-doped Al2TiO5 coated Si3N4. This difference was attributed to the protective nature of the corrosion layer, which in the case of CMZP, significantly impeded the inward diffusion …

    vt Repository record for CMZP and Mg-doped Al2TiO5 Thin film Coatings for High Temperature Corrosion Protection of Si3N4 Heat Exchangers (opens in a new tab)

  13. Micro-mechanical testing of the hex-BN interphase in SiCf/SiC composites for aero-propulsion

    … The latter included the interfacial shear strength (varied), modulus (25.9 ± 5.4 GPa), hardness (1.3 ± 0.1 GPa), fracture toughness (6.7 ± 2.4 MPa.m<sup>1/2</sup>), debonding toughness (13.3 J.m<sup>-2</sup>), and frictional sliding resistance (4 ± 1 MPa) of the interphase, alongside other …

    oxford Repository record for Micro-mechanical testing of the hex-BN interphase in SiCf/SiC composites for aero-propulsion (opens in a new tab)

  14. Premix molding compounds : the effect of processing technique on profitability and product integrity

    … fiber degradation and. consequent mechanical strength reductions in moldings. Previously, as this was the only equipment, available with the capability to admix highly viscous materials, processors would formulate and design to compensate for the resultant property reductions that are …

    njit Repository record for Premix molding compounds : the effect of processing technique on profitability and product integrity (opens in a new tab)

  15. Simulation and experimental methods for damage prediction in advanced marine composites

    … utilising advanced composites due to their high strength-to-weight ratio and corrosion resistance. However, accurate prediction of low velocity impact (LVI) damage remains a challenge due to the complexity of composite materials and the challenges of the marine environment. These challenges are …

    unsw Repository record for Simulation and experimental methods for damage prediction in advanced marine composites (opens in a new tab)

  16. Predicting the Ductility of Tungsten Based BCC Refractory High Entropy Alloys: A Computational Science Driven Study

    … promise excellent irradiation resistance and strength retention at high temperatures but exhibit brittle behavior at room temperatures limiting their formability. Understanding the deformation mechanisms and predicting their ductility at room temperature is a topic of interest in contemporary …

    clemson Repository record for Predicting the Ductility of Tungsten Based BCC Refractory High Entropy Alloys: A Computational Science Driven Study (opens in a new tab)

  17. Influence of Remelting on Microstructural Defects in Laser Powder Bed Fusion-Produced Tungsten

    … due to its high thermal conductivity and strength retention at high temperatures. However, traditional manufacturing of tungsten is limited by its brittle behavior at room temperature and high melting point. Additive manufacturing (AM), in particular laser powder bed fusion (PBF-LB), has …

    gatech Repository record for Influence of Remelting on Microstructural Defects in Laser Powder Bed Fusion-Produced Tungsten (opens in a new tab)

  18. PHASE EQUILIBRIA AND MICROSTRUCTURAL EVOLUTION IN NI-CE EUTECTIC ALLOYS

    … only exhibits solid solution and precipitation strengthening, resulting in exceptional microstructural and mechanical properties, but is also castable. Current studies have demonstrated that binary and ternary Ni-Ce alloys exhibit exceptional strength retention when exposed to elevated …

    utk-theses Repository record for PHASE EQUILIBRIA AND MICROSTRUCTURAL EVOLUTION IN NI-CE EUTECTIC ALLOYS (opens in a new tab)

  19. Novel, inorganic composites using porous, alkali-activated, aluminosilicate binders

    … temperature matrix material. It showed the best strength retention at elevated temperature, as well as a very low coefficient of thermal expansion when crystallized into pollucite. These qualities made cesium geopolymer the best choice for creep resistant applications. Cesium geopolymer binders …

    uiuc Repository record for Novel, inorganic composites using porous, alkali-activated, aluminosilicate binders (opens in a new tab)

Page 1 of 3