Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 45 for “"Strength models"”.

  1. Seal strength models for medical device trays

    … were developed for the prediction of seal strength for medical device trays. A new methodology was developed and used for identifying burst and peel locations and comparing burst pressure and peel force. Multiple linear regression was used to fit 76 models, selecting the best models based …

    tamu Repository record for Seal strength models for medical device trays (opens in a new tab)

  2. Simulated dynamic lifting strength models for manual lifting

    … for the development of the mathematical models for prediction of the weight lifting capacity of individuals for lifting a box and a bag from floor to shoulder height and knuckle to shoulder height at frequencies of 2 and 6 lifts per minute. The dependent variable was the maximum …

    ttu Repository record for Simulated dynamic lifting strength models for manual lifting (opens in a new tab)

  3. Objective Bayesian inference for stress-strength models and Bayesian ANOVA

    … estimating the reliabilities in Weibull stress-strength models, some matching priors are derived based on a modi ed pro le likelihood. Simulation studies show that these matching priors perform well with small sample sizes. Next, a generalized Zellner's g-prior is proposed for model selection in …

    missouri Repository record for Objective Bayesian inference for stress-strength models and Bayesian ANOVA (opens in a new tab)

  4. Development and assessment of response and strength models for bolted steel connections using refined nonlinear 3D finite element analysis

    … in existing methods to characterize their strength and typically nonlinear response due to the complex interaction of the bolts and structural components. Yet it is necessary for the engineer to be able to determine the three main connection response characteristics: stiffness, strength, …

    gatech Repository record for Development and assessment of response and strength models for bolted steel connections using refined nonlinear 3D finite element analysis (opens in a new tab)

  5. Exploring the structure of cognitive processes: discrete and continuous theories of memory and perception

    … the literature is dominated by continuous latent-strength models such as signal detection theory. Here the author sought to test the effectiveness of discrete-state models at predicting performance on cognitive tasks. Thirty-nine participants completed Experiment 1, which analyzed recognition …

    missouri Repository record for Exploring the structure of cognitive processes: discrete and continuous theories of memory and perception (opens in a new tab)

  6. Investigation and modeling of shock wave propagation in a shock tube with a partially opened diaphragm

    … are used to develop and assess theoretical shock strength models, based on discharge coefficients for orifice plates in compressible pipe flow and sonic nozzles. Model predictions are compared to an empirical model from the literature to assess performance. Limitations of the models are examined, …

    calgary Repository record for Investigation and modeling of shock wave propagation in a shock tube with a partially opened diaphragm (opens in a new tab)

  7. Performance simulation of a composite orthopedic implant device

    The static strength and long-term performance of composite hip prostheses under complex mechanical and environmental loading conditions are studied through theoretical modelling and experimental investigations. Two static strength models, namely, a cantilever beam model and an elastic foundation …

    vt Repository record for Performance simulation of a composite orthopedic implant device (opens in a new tab)

  8. Mechanism and Conditions of Failure of a Gigantic Mass Wasting Event in Basalt: A Geotechnical Investigation of the Sanford Pasture Landslide Complex, Yakima County, Washington

    … and the Nile thrust, respectively. Rock mass strength models were developed for each geologic unit based on laboratory testing, structural data collected in the field, and semi-empirical relationships. By combining the strength models with a geologic cross section developed by previous …

    unr Repository record for Mechanism and Conditions of Failure of a Gigantic Mass Wasting Event in Basalt: A Geotechnical Investigation of the Sanford Pasture Landslide Complex, Yakima County, Washington (opens in a new tab)

  9. Seismic performance evaluations and analyses for composite moment frames with smart SMA PR-CFT connections

    … prototypes were designed based on a hierarchy of strength models for each connection component. Numerical simulations with refined three dimensional (3D) solid elements were conducted on full scale PR-CFT connection models in order to verify the strength models and evaluate the system performance …

    gatech Repository record for Seismic performance evaluations and analyses for composite moment frames with smart SMA PR-CFT connections (opens in a new tab)

  10. Shrinkage and strength characterizations of concrete containing supplementary cementing materials

    … in drying shrinkage strains and compressive strengths are observed in HPC containing supplementary cementing materials from normal concrete (without any supplementary cementing material). The differences in these properties due to addition of supplementary cementing materials occur because of …

    wvu Repository record for Shrinkage and strength characterizations of concrete containing supplementary cementing materials (opens in a new tab)

  11. STEEL CONNECTION DESIGNS BASED ON INELASTIC FINITE ELEMENT ANALYSES (GUSSET, BRACING, STRUCTURES).

    … in diagonally braced frames. Stiffness and strength models of structural fasteners based on physical tests were incorporated into inelastic finite element analyses. The modeling techniques were verified by comparing analytical and experimental results of full scale connection tests. Finite …

    arizona-thes Repository record for STEEL CONNECTION DESIGNS BASED ON INELASTIC FINITE ELEMENT ANALYSES (GUSSET, BRACING, STRUCTURES). (opens in a new tab)

  12. Effect of Pore-Water Surface Tension on Tensile Strength of Unsaturated Sand

    … of pore-liquid. It was found that the tensile strength decreases, as the surface tension of the pore-liquid decreases. However, tensile strength does not decrease as a simple multiple of ratio of surface tension of pore-liquid. The experimental results were also compared with the predicted …

    york Repository record for Effect of Pore-Water Surface Tension on Tensile Strength of Unsaturated Sand (opens in a new tab)

  13. High-Precision Measurements And Modeling Of How Brittle Granular Materials Behave Under Shock Compression

    … and used to calibrate continuum compaction models. Empirical fitting parameters for the continuum compaction models are investigated for correlations with the CeO2 powder initial density. The single fitting parameter of the P-α Menikoff-Kober compaction model, PC, is shown to exponentially …

    gatech Repository record for High-Precision Measurements And Modeling Of How Brittle Granular Materials Behave Under Shock Compression (opens in a new tab)

  14. Υπολογιστική και πειραματική μελέτη της κλασματικής συμπεριφοράς επιφανειών βράχου

    … principles inducted a new fractal model of shear strength behavior. This new model presents several advantages compared to previous, fractal or not, as it only demands knowledge of the basic fractal quantities and it does not premise the execution of other experiments. Besides, the existing shear …

    greece Repository record for Υπολογιστική και πειραματική μελέτη της κλασματικής συμπεριφοράς επιφανειών βράχου (opens in a new tab)

  15. Probabilistic Finite Element Simulation of Sheet Molding Compound Composites with Multimodal Weibull Distribution

    … properties and the large difference in strengths under different stress distribution or loading conditions. For example, SMC demonstrates 1.5-2 times higher strength under 3-point (3-pt) bending in comparison to uniaxial tension strength. This phenomenon is known as the size effect on …

    msu Repository record for Probabilistic Finite Element Simulation of Sheet Molding Compound Composites with Multimodal Weibull Distribution (opens in a new tab)

  16. Standoff screws functioning as mechanical shear connectors in composite joists

    … were (1) to provide an understanding of the strength of the standoff screw in various test geometries and (2) to provide an understanding of the slip characteristics, or ductility, of the connector. A review of literature presents several applicable existing welded stud strength models based …

    vt Repository record for Standoff screws functioning as mechanical shear connectors in composite joists (opens in a new tab)

  17. Codeformation Processing of Mechanically-Dissimilar Metal/Intermetallic Composites

    … which are often used in discontinuous composite strength models. Study of the high temperature flow behavior of the components of the metal/IMC composite is critical to the development of an understanding of codeformation. A series of compression tests performed at 1000° to 1200°C and …

    vt Repository record for Codeformation Processing of Mechanically-Dissimilar Metal/Intermetallic Composites (opens in a new tab)

  18. Solid solution strengthening mechanisms in high entropy alloys

    … experimentation. Although solid solution strengthening is the main strengthening mechanism of HEAs, the fundamentals behind this mechanism are not fully understood in this context, and further consideration with respect to modeling is warranted. In this work, the solid solution …

    colo-mines Repository record for Solid solution strengthening mechanisms in high entropy alloys (opens in a new tab)

  19. Determination of geotechnical properties of seafloor sediment using a free fall penetrometer

    … physical properties such as undrained shear strength, coefficient of consolidation and shear modulus for soft fine-grained sediment.Acceleration signals from drops of a free fall penetrometer contain information about the nature of the seafloor. A simple sediment classification model was …

    unh-thes Repository record for Determination of geotechnical properties of seafloor sediment using a free fall penetrometer (opens in a new tab)

  20. Anisotropic shock response of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB)

    … incorporate anisotropic crystal plasticity and strength models into the continuum descriptions. The deformation mechanisms of TATB crystals in the shock-induced pore collapse MD simulations were studied using Strain Functional Analysis. This new approach maps discrete quantities from atomistic …

    missouri Repository record for Anisotropic shock response of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) (opens in a new tab)

Page 1 of 3