Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 221 for “"Strength of materials"”.
-
The development of a portable strength of materials demonstrator
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1938
-
The effect of stress ratio, maximum stress, stress amplitude and yield strength of materials on fatigue crack closure of 2024 aluminum and 4130 steel
… in analyzing fatigue crack propagation. Validity of crack closure phenomenon was investigated by many researchers and conflicting results were presented in the literature. This experiment was conducted to investigate crack closure phenomenon more thoroughly and to identify the governing factors …
-
Reduced Order Structural Modeling of Wind Turbine Blades
… prove to be expensive for the preliminary design of wind turbine blades. However, wind turbine blades are large slender members with complex cross sections. They can be accurately modeled using beam models. The accuracy in the predictions of the structural behavior using beam models depends on the …
-
Notched strength analysis of tensile specimens taken from a thick, filament-wound graphite/epoxy pressure vessel
An experimental analysis of specimens taken from a thick, filament-wound composite material pressure vessel (cylinder) was performed by testing tensile coupons with various semi-elliptical surface notches. The strength of specimens with small notches was found to be notch insensitive. The strength …
-
Investigation of the stretch moduli
Text from page 15: Professor E. R. Hedrick, after plotting numerous curves from data obtained by the Watertown Arsenal, on testing strength of materials, found that in a great many determinations of the relation of the stress to the strain Hooke's Law was not always followed. This deviation from a …
-
The Design, Construction, Testing and Evaluation of a Strength-of-Material Testing Device
The purpose of this study was to design, construct, testing and evaluate a strength-of-materials testing device to be used as an appropriate aid to instruction in industrial arts education. In addition to providing a suitable testing device specifically the criteria of size, economy, simplicity of …
-
A probabilistic approach for seismic risk assessment with uncertain input parameters
The main objective of this thesis is the development of a procedure for analyzing the seismic reliability of a structure considering uncertainties in the factors affecting its performance. These uncertainties stem from different earthquakes records, from structural mass distributions, foundation …
-
Moisture absorption characteristics of 100% recycled corrugated board
Thesis (M.S.)--Michigan State University. School of Packaging, 1995
-
Digital computer analysis of rigid body problems
… idealized as a rigid body supported by a system of links. The program checks on the arrangement and number of the support links. Flags are set so that this subroutine may be used to select whether to use simple statics or strength of materials methods in subsequent analysis of the problem. …
-
Failure analysis of bonded steel/CFRP laminate connections
… are widely used in industry, because of significant advantages such as uniform stress distribution, design flexibility and suitability to bond similar and dissimilar structural materials. This study focuses the adhesive-bonded long overlap of steel/carbon fibre reinforced polymer …
-
Scale dependence in friction: the transition from intimate contact to monolayer lubricated contact
… and AFM friction experiments ranged in the order of tens of [mu]m (>10⁵ m) and several nm (< 10⁻⁸ m), respectively. In spite of the fact that the contact radii in these experiments differ by several orders of magnitude, the data from both experiments obey Bowden and Tabor's friction law F = [tau]A …
-
Load resistance charts for heat-treated window glass
Major U.S. glass manufacturers such as LOF/Pilkington and PPG Industries, Inc. once supplied design recommendations in the form of glass thickness selection charts. These charts enabled users to select an appropriate glass thickness based on required design pressures and glass area. ASTM …
-
A photoelastic technique for the determination of stress intensity factors
A technique for obtaining values of the stress intensity factor from photoelastic data for three dimensional cracked body problems is described. The stress intensity determination is accomplished without resorting to stress separation methods through employing an expression for the maximum in-plane …
-
The relation between edgewise compression strength and the degree of the angle perpendicular to the compressive force of corrugated fibreboard
Thesis (M.S.)--Michigan State University. School of Packaging, 1972
-
Investigation of a dynamic Saint-Venant region in a semi-infinite strip
… (Ph. D.)--Michigan State University. Department of Metallurgy, Mechanics, and Materials Science, 1972
-
A study of the sufficiency of materials in a one story residence built to withstand hurricane winds
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1947
-
Bending of a bonded beam as a test method for adhesive properties
A strength of materials type solution is obtained for the shear stress state in the adhesive layer of a bonded cantilever beam subjected to an end load. The shear stress is constant through the thickness of the adhesive layer and varies from zero at the fixed end to a maximum value at the free end. …
Page 1 of 12