Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 589 for “"Stress Concentration"”.
-
Stress concentration factors for circular notches
… and adapted to the successful determination of stress concentration factors for thin elastic bars containing V-shaped round bottom notches and subjected to tensile or bending loads. Accuracy and reliabilty are demonstrated. Comparisons are made with previous analytical and experimental …
-
Stress concentration in fibrous composite material
This thesis work involves an initial study on Stress Concentration caused by holes out of center in thin plates of finite width made of Unidirectional and Crossply Fiberglass Composites. The results are reported under the form of the Stress Concentration factor K. as a function of two …
-
Alleviation of stress concentration with analogue reinforcement
In order to reduce the stress concentration around a hole in a plate, new, “analogue” reinforcements instead of reinforcing rings were used in this investigation. In two of these specimens, reinforcements with different volume fractions were arranged to coincide with the stress trajectories for an …
-
Fatigue Cracking from Stress Concentration in Mild Steel
… The results could be described by the range of stress intensity factor, which for crack initiation was modified to take account of the notch root radius. Analysis of elastic stress distributions at cracks and notches and models of plasticity at crack tips are used to discuss the results. Limited …
-
Determination of stress concentration factors using experimental methods
Several experimental methods are examined for stress concentration factor determination. Tests are performed on a chosen 2-D specimen using strain gages, brittle coating, brittle specimen failure, photoelasticity, and Moire interferometry. Results are compared to each other and to finite element …
-
Torsional stress concentration factor for hollow stepped shafts
In this investigation the stress concentration factor was evaluated for a hollow stepped shaft with variable wall thickness and two fillet sizes. Electric strain gages of the SR-4 type were employed to measure strains in the fillet section. Values of the stress concentration factor were determined …
-
Temperature dependence of stress concentration factors in composite materials
… of the effects of temperature on the strain concentration factor due to a circular hole in a graphite/ epoxy laminated composite plate subjected to tension in a principal material direction. It is shown that for the [0/+45/0] laminate tested, the strain concentration factor at 300 degrees …
-
Experimental study of inelastic stress concentration around a circular notch
… relations can be used to predict elastic-plastic stresses and strains near a circular notch for 7075-T6 aluminum alloys and ARALL 4 composites. The loading conditions were tension and four-point bending. Glinka and Neuber have developed relations that predict local inelastic strain response based …
-
Stress concentration factors for truss-end hollow structural section connections
… in current design guidelines [for calculation of stress concentration factors (SCFs)] cater to: (i) unreinforced connections, with (ii) sufficient chord continuity beyond the connection on both sides. Existing formulae in CIDECT Design Guide 8 (DG8) for regular connections were shown to be …
-
Stress concentration around dowel bars in jointed rigid concrete pavements
In this study, the magnitude and state of stresses induced around dowel bars were identified through detailed 3D Finite Element (3DFE) modeling of dowel jointed rigid pavement structures. Both straight and skewed joints were modeled using extremely fine meshing that allows accurate modeling of the …
-
Experimental Determination of Dynamic Stress Concentration Factors in Rectangular Steel Bars
Stress concentration factors obtained from impact tests indicate substantial agreement with experimentally derived static stress concentration factors. Testing was limited to one 3/8 diameter centrally located hole in a long rectangular bar 2 inches wide. The hole was located at a bar cross section …
-
A study of failure in carbon/foam sandwich composites with stress concentration
… of carbon/foam sandwich composite plates with stress concentration. The plates had circular holes and were subjected to bending and compressive loading. Both three-point and four-point bending tests were conducted, For the testing, the foam thickness, the size of the hole, the number of holes, …
-
Interacting stress concentration factors and their effect on fatigue of metallic aerostructures
… or some other similar detail. The interaction of stress concentration effects between a hole and step are not well understood and the resulting impact on fatigue performance is difficult to predict. There exists a need for fatigue data that can be used to determine the analysis methods for …
Page 1 of 30