Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 136 for “"Stress Redistribution"”.
-
Numerical modeling of pillar stress redistribution during the retreat mining process
… retreat process impacts the global and local stresses in the mine. This thesis aims to contribute to closing this gap. A preliminary study was performed in order to understand the influences of model type (elastic versus inelastic), pillar width to height (W/H) ratio, and roof properties on …
-
Stress Redistribution in Berea Sandstone Samples Using Acoustic Emission Tomography in the Laboratory
… velocity are typically representative of higher stress concentrations, whereas areas of low velocity can be areas of fracturing. The variation of velocity tomography described in this thesis uses acoustic emissions as sources for the propagation wave. Acoustic emission sources provide advantages …
-
Effect of Phase Transformation on Stress Redistribution and Damage Evolution During Actuation Fatigue in Shape Memory Alloys
… phase transformation cycle by considering the redistribution of stresses during phase transformation in notched cylindrical SMA bars under both pseudoelastic and thermal actuation loading paths. These notches are tailored to achieve stress concentrations of varying magnitude in order to see how …
-
3-D Stress Redistribution During Hydraulic Fracturing Stimulation And Its Interaction With Natural Fractures In Shale Reservoirs
… some other affecting factors, e.g. in-situ stress conditions, reservoir mechanical properties, natural fracture distribution, and redistribution of the stress regime around the hydraulic fracture. Therefore, an accurate estimation of the redistribution of pore pressure and stresses around …
-
Passive Tomography to Image Stress Redistribution Prior to Failure on Berea Sandstone and Marcellus Shale for Caprock Integrity
… sample were calculated to determine how well the stress redistribution within the sample could be mapped using the recorded data. For the main indenter tests two samples were tested, a piece of Berea Sandstone and a piece of Marcellus Shale. The secondary test was a transform shear test using …
-
Patient-Specific Finite Element Analysis of Stress Redistribution and Adjacent Vertebral Fracture Risk Following Cement Augmentation Toward Predictive Adjacent Fracture Modeling in Pre/Post-Operative Vertebroplasty for Cancer Relief
… element analysis (FEA) framework to evaluate stress redistribution and adjacent vertebral fracture risk following vertebroplasty with polymethyl methacrylate (PMMA) cement. Using CT-derived DICOM data, individualized vertebral geometries and cement morphologies were segmented, reconstructed, …
-
Defining Stress Changes Ahead of a Tunnel Face and Design of a Data Acquisition System
… is a non-invasive technique to map the stress changes induced by mining ahead of the active face. Seismic tomography maps the velocity distributions of elastic waves traveling through a rock mass. The velocity distributions mapped in the tomograms can relate to anomalies in the rock such …
-
Acoustoelasticity and data processing for acoustic-based corrosion monitoring in structures
… from cable-stayed and suspension bridges to prestressed and post-tensioned concrete members. The common theme in these structures is corrosion of the load-bearing steel strands. These members carry significantly larger stresses compared to steel reinforcing bars, and corrosion can therefore be …
-
Numerical analyses of the long term behavior of enhanced geothermal system (EGS)
… is to gain a better understanding of thermal stresses generated during the heat recovery process as a result of induced cooling of rocks and interaction of thermal stresses with existing lithologic stresses. The long term behavior of the EGS is assessed in terms of stress redistribution and …
-
Study of the Effect of Interface Slip and Diffusion Mechanisms on the Creep of Metal and Intermetallic Matrix Composites
… influence of the two mechanisms on the transient stress redistribution between the composite constituents is investigated. For a composite whose matrix-reinforcement interface is either perfectly bonded, freely slipping, or rapidly diffusive, the transient solution scales with the applied load and …
-
Imaging of Stress in Rock Samples using Numerical Modeling and Laboratory Tomography
… Many of these incidents take place due to stress redistribution resulting from mine workings. Thus it is very important to develop some tools to predict this failure in advance and prevent any fatalities arising from the failure. The current study uses two tools — numerical modeling and …
-
Applications of Double-Difference Tomography for a Deep Hard Rock Mine
… the rock mass that can be used to infer relative stress of the rock mass. The data set used for the double-difference tomography inversion was from Creighton Mine in Sudbury, Ontario, Canada, and consisted of two months of data averaging 150 microseismic events per day. Three separate studies were …
-
Microseismic Monitoring of a Room and Pillar Retreat Coal Mine in Southwest Virginia
… to provide more information about the changing stress conditions created by retreating and ultimately reduce risk to miners. Microseismicity has been proven to be an acceptable method of monitoring stress redistribution in underground coal mines and assist in explaining rockmass behavior …
-
Viscoelastic Cylindrical Pressure Vessel With Variable Inner Radius
… is to predict from a theoretical basis the stress redistribution processes occurring within the viscoelastic core of a cylindrical pressure vessel reinforced by an elastic casing around the outer perimeter, and subject to internal pressure applied to the time-dependent inner boundary of the …
-
Mitigation of Vehicular Crashes into Masonry Walls with Innovative Auxetic Composites
… resilience. Applied to masonry, ATRM enhances stress redistribution and reduces failure severity, confirming its potential for high-speed impact protection and future optimization in composite design and material synergy.
-
Nonlinear finite element analysis of tubular joints
… of tubular joints. The results include the stress redistribution within the joint at the ultimate state, the stiffness of the T-type joints at different load levels, the real failure modes of tubular joints under external loads and the assessment of the safety margins in the design process.
-
Impact Behaviour of Hybrid Long Fibre Thermoplastic Composites
… pull out for short fibres, in addition to fibre stress redistribution for long fibres. Good agreement between the presented model predictions and experimental data was observed. For the case of hybrid composites with long fibres, the dominant failure mechanisms were fibre stress redistribution …
-
Design and Testing of a Laboratory Ultrasonic Data Acquisition System for Tomography
… tomography allows for the measurement of stress-induced density changes inside of a rock mass or sample by non-invasive means. Tomography is a non-destructive testing method by which sensors are placed around a sample and energy is introduced into the sample at one sensor while the other …
-
Static and Seismic Stability of Cut Slopes in Terms of Reliability
… failure as the critical failure mode. The stress condition along a potential failure surface both prior to and after an excavation is investigated by finite-element elasto-plastic analysis; in this process, a potential failure surface is modeled as joint elements. Through the investigation, …
Page 1 of 7