Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Stress estimation"”.

  1. A Deep Learning Framework for Quantitative Stress Estimation using Wearables

    Repeated exposure to everyday stressors without sufficient recovery can progressively lead to chronic stress and depression, highlighting the importance of early stress monitoring and prevention. Although advances in wearable devices have enabled stress detection, most methods adopt discrete …

    queens Repository record for A Deep Learning Framework for Quantitative Stress Estimation using Wearables (opens in a new tab)

  2. Stress Estimation Using Clock Spring Modeling Techniques in Twist Capsule Design

    … This cyclic tightening and loosing can cause stresses on these flex tapes consequently, resulting in their failure due to fatigue. Therefore, it is imperative that some method be used to estimate the stresses in the flex tape in order that the optimal design parameters may be calculated. The …

    vt Repository record for Stress Estimation Using Clock Spring Modeling Techniques in Twist Capsule Design (opens in a new tab)

  3. Development of Bayesian Approaches for Uncertainty Quantification in In Situ Stress Estimation

    Knowledge of the in situ stress state is crucial for a wide range of rock mechanics applications, but stress estimation at different scales may be unreliable due to various sources of uncertainty. It is therefore critical to be able to probabilistically quantify uncertainty in stress estimation, as …

    toronto-retro Repository record for Development of Bayesian Approaches for Uncertainty Quantification in In Situ Stress Estimation (opens in a new tab)

  4. Stress estimation for fatigue monitoring: determination through numerical models and operational modal analysis.

    Muchas estructuras están sometidas a cargas dinámicas que generan tensiones de amplitud variable, las cuales pueden provocar fallos por fatiga. Dado el gran número de estructuras, como puentes, chimeneas, torres, turbinas eólicas, paneles solares, etc., que son susceptibles de sufrir este fenómeno, …

    oviedo Repository record for Stress estimation for fatigue monitoring: determination through numerical models and operational modal analysis. (opens in a new tab)

  5. Stress Estimation From Borehole Scans For Prediction Of Excavation Overbreak In Brittle Rock

    … considerations during design is the state of stress that exists at the location of a project. Despite this, stress is often the most poorly understood site characteristic, given the current challenges in accurately measuring it. This stems from the fact that stress can’t be directly measured, …

    queens Repository record for Stress Estimation From Borehole Scans For Prediction Of Excavation Overbreak In Brittle Rock (opens in a new tab)

  6. Borehole Breakout: A Multi-Method Investigation of Formation Mechanisms for In-Situ Stress Estimation

    In-situ stresses are of fundamental importance for all subsurface activities. Despite advancements in stress measurement techniques, they often involve a trade-off: either high costs and significant time consumption for accuracy or compromised reliability and accuracy for efficiency. Borehole …

    unsw Repository record for Borehole Breakout: A Multi-Method Investigation of Formation Mechanisms for In-Situ Stress Estimation (opens in a new tab)

  7. In Situ Stress Estimation Methods and the Integration of Numerical Modelling for Stress Reconstruction and Future Stress Evolution

    A reliable estimation of in situ stress orientation and magnitude is necessary for determining wellbore stability in the oil and gas industry, or assessing excavation stability for mining and civil engineering projects. Methods of stress estimation in deep borehole investigations are generally …

    queens Repository record for In Situ Stress Estimation Methods and the Integration of Numerical Modelling for Stress Reconstruction and Future Stress Evolution (opens in a new tab)

  8. Development of forward-viewing high-frequency ultrasound techniques for velocity and wall shear stress estimation in coronary arteries

    … causes of death in the United States. Wall shear stress (WSS), a hemodynamic drag force exerted by viscous blood flowing tangentially to the vessel walls, has been recognized as one of the critical physical factors contributing to atherosclerosis. Low wall shear stress (WSS) is believed to be …

    gatech Repository record for Development of forward-viewing high-frequency ultrasound techniques for velocity and wall shear stress estimation in coronary arteries (opens in a new tab)

  9. Development of a 1D Mechanical Earth Model and Fracture Analysis at the HFTS-1 Site, Midland Basin

    … design requires reliable pore-pressure and stress estimates. This thesis compares poroelastic and viscoelastic stress-estimation approaches using an extensive dataset from Hydraulic Fracture Test Site 1 (HFTS-1) in the Midland Basin, Reagan County, Texas. The Wolfcamp Formation exhibits …

    houston Repository record for Development of a 1D Mechanical Earth Model and Fracture Analysis at the HFTS-1 Site, Midland Basin (opens in a new tab)

  10. Analysis and Characterization of Residual Stresses in Pipe and Vessel Welds

    This research sought to establish residual stress distribution characteristics in typical pipe and vessel welds by carrying out a comprehensive parametric study using an advanced sequentially coupled thermo-mechanical finite element procedure. The parametric study covered vessel and pipe components …

    uno Repository record for Analysis and Characterization of Residual Stresses in Pipe and Vessel Welds (opens in a new tab)

  11. A Study of Hydraulic Fracturing Initiation in Transversely Isotropic Rocks

    … interest for reservoir stimulation and in-situ stress estimation. Rock fabric anisotropy not only causes in-situ stress anisotropy, but also affects fracture initiation from the wellbore. In this study a semi-analytical method is used to investigate these effects with particular reference to …

    tamu Repository record for A Study of Hydraulic Fracturing Initiation in Transversely Isotropic Rocks (opens in a new tab)

  12. Stress Indices in surgical simulation

    … method makes estimating surgeons’ mental stress during an operation difficult to quantify and interpret. Although several non-invasive stress measuring methods have been proposed, most studies have used only one or two stress estimation parameters and produced conflicting results. Τhe …

    greece Repository record for Stress Indices in surgical simulation (opens in a new tab)

  13. Computational Stress and Deformation Analysis of Mammary Prosthesis

    … finite element models to determine the stresses in the implant walls under tissue loading. The non-linear material models were used to more accurately model the complex nature of the implant stresses. After analysis it was found that the implants were under compressive loading which …

    vt Repository record for Computational Stress and Deformation Analysis of Mammary Prosthesis (opens in a new tab)

  14. Modeling Elastic Anisotropy in Diffraction Experiments using Finite Elements

    … on the results, and a new method of stress estimation from diffraction experiments. Chapter 1 includes an explanation of the methods used along with a presentation of the experimental data referred to throughout the work. It contains the material from [1]. The experiments are neutron …

    cornell Repository record for Modeling Elastic Anisotropy in Diffraction Experiments using Finite Elements (opens in a new tab)

  15. Field Estimates of Fluid Thresholds for Aeolian Sand Transport

    … were estimated with 2 minute-averaged Reynolds stress derivations based on UA measurements. Median grain sizes for each event were estimated via photosieving.The regression results from surface and near-surface data indicate no statistically significant relationship between threshold shear and …

    alabama Repository record for Field Estimates of Fluid Thresholds for Aeolian Sand Transport (opens in a new tab)

  16. Endografts, Pressure, and the Abdominal Aortic Aneurysm

    … endograft-treated AAA showed that peak von Mises stress within the wall varied between 533 kPa and 1200 kPa when different material properties for the endograft were used. The patient-specific models, built from time series of patient CT scans with similar patient history but different outcomes, …

    tamu Repository record for Endografts, Pressure, and the Abdominal Aortic Aneurysm (opens in a new tab)

  17. Reliable Estimation of Horizontal Stress Magnitudes from Borehole Breakout Data

    … mines, understanding of the state of in-situ stresses will be increasingly important to ensure the workplace safety. However, current stress measurement techniques experience difficulties in obtaining reliable results at low costs. Borehole breakout is a drilling-induced phenomenon due to the …

    unsw Repository record for Reliable Estimation of Horizontal Stress Magnitudes from Borehole Breakout Data (opens in a new tab)

  18. A stress analysis method for fatigue life prediction of welded structures

    … loads and material. Detailed knowledge of stress fields in the critical regions of weldments is used to determine the fatigue life. The main theme of the research discussed in this thesis is to provide details of the methodology which has been developed to determine peak stress and …

    waterloo Repository record for A stress analysis method for fatigue life prediction of welded structures (opens in a new tab)

  19. Flexural distress and degradation mechanisms in pretensioned concrete beams and railroad crossties

    … Concrete crossties are often designed as prestressed concrete beams, but their use in the track structure differs greatly from other prestressed concrete beam applications. Although such beams are typically safety-critical structural components, individual concrete crossties can fail with …

    uiuc Repository record for Flexural distress and degradation mechanisms in pretensioned concrete beams and railroad crossties (opens in a new tab)

  20. Effects of transient borehole deformation on rock stress and rock properties analysis

    Understanding the in-situ stresses and rock mechanical properties is necessary to ensure successful drilling, quality wellbore completion, and reservoir performance analysis. However, the conventional determination methods normally require a substantial financial investment, including prolonged rig …

    waterloo Repository record for Effects of transient borehole deformation on rock stress and rock properties analysis (opens in a new tab)

Page 1 of 2