Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"Stress inversion"”.
-
Stress Inversion Using LiDAR Tunnel Deformation Measurements
Far-field stresses are those present in a volume of rock prior to excavations being created. Estimates of the orientation and magnitude of far-field stresses, often used in mine design, are generally obtained by single-point measurements of stress, or large-scale, regional trends. Point …
-
Far-Field Stress Determination Using Seismic Stress Inversion
… to achieve more reliable information about the stress field in deep mines, especially around mining excavations by using the method of seismic stress inversion. After investigating several stress inversion algorithms, one method, MOTSI, has been applied to the seismic data collected from Nickel …
-
Stress State Mapping Using Seismic Stress Inversion: Application to Kidd Mine
… study investigates the applicability of seismic stress inversion in a mining environment with active geological structure, in order to map spatiotemporal stress states. First Motion Stress Inversion (MOTSI) (Abers, 2001) software is utilized, whereby this research outlines methods to establish …
-
Stress Inversion and Damage Quantification in Tight Gas Shale with Application to Hydraulic Fracturing
… aims to advance the quantitative analysis of stress and failure process in tight gas shale under hydraulic fracturing by integrating stress inversion, microseismic monitoring, acoustic emission and discrete element modeling techniques. With the introduction of a modified Bott hypothesis that …
-
Active tectonics and space-time dependent seismicity in the region of Central Asia
… setting is examined by the estimation of the stress regime. The direction of the primary stress axes in all major tectonic features is calculated by the “classical” Stress Inversion method (FMSI), but also by a new approach based on the application of Fisher statistics on the distribution of …
-
Source Parameters and Tectonic Setting of the 2017 St. Elias Earthquake Sequence near the Southern Terminus of the Eastern Denali Fault, Northwestern Canada
… by more than 2,700 aftershocks. Moment-tensor inversion of the mainshock signals shows that the initial event produced reverse slip on a steeply dipping fault with a NW-SE strike direction, while the second produced left-lateral strike-slip on a near-vertical fault with an E-W strike direction. …
-
Investigating the Seismicity and Stress Field of the Truckee - Lake Tahoe Region, California - Nevada
… limited lateral extent. In addition, the local stress field is modeled from 679 manually determined short–period focal mechanism solutions, between 2000 and 2013, located within a fairly dense local seismic network. Short–period focal mechanisms were developed with the HASH algorithm …
-
Συμβολή στη μελέτη της σεισμικότητας, της σεισμικής επικινδυνότητας και της ενεργού τεκτονικής στο Ν. Αιγαίο
… the present thesis was the study of the active stress field of the Southern Aegean Sea subduction area from fault plane solution data, either collected or computed in the framework of the thesis, focusing on the results from the application of different stress inversion methods. We employ the …
-
Seismic analysis of a slab tear in the Northeast Caribbean.
… depths of 100-150 km have oblique mechanisms. A stress inversion reveals two distinct stress regimes, which supports the hypothesis that the subducting NOAM plate is tearing at or near these swarms. Global and well-documented slab tears associated with high rates of intermediate-depth seismicity …
-
Crustal stress across the northern Arabian plate and the relationship with the plate boundary forces
… provide insight into crustal kinematics and stress; however, reliable determination of earthquake source parameters can be challenging in a complex geological region, such as the continental collision zone between the Arabian and Eurasian plates. The goal of this study is to investigate …
-
North-northwest shortening across Laramide structures in the southeastern Uinta Mountains, Colorado and Utah
… conjugate fracture, octahedra, and direct stress inversion analyses of 1206 slickensided minor faults give slip and σ1, trends averaging N22°W. Although the slip and σ1 trends are nearly perpendicular to individual structural trends, suggesting local control of stress and strain fields by …
-
The Influences of Stress and Structure on Mining-induced seismicity in Creighton Mine, Sudbury, Canada
… do not align with shear-zone orientations. A stress inversion using microseismic focal mechanism information yields a stress tensor that is comparable to the regional stress tensor. Universal Distinct Element Code numerical models demonstrate that a yield zone exists immediately surrounding …
-
Damage Detection and Sensor Placement Strategies for Structures Under Frequency-Domain Dynamics
… </p><p>To that end, we formulate a simultaneous inversion and optimal experimental design (OED) framework for models described by a set of discretized partial differential equations (PDEs). Abstractly, we construct and solve the corresponding (potentially nonlinear) inverse problem to attain a …
-
Exploring Physical Controls on Subduction-Zone Slip Processes and Inverting Seismic Data for Dynamic Stress Changes
… zones. The second goal is to develop an inversion method to obtain the coseismic dynamic stress evolution directly using seismic waveforms, instead of from inverted kinematic slip models. For the first goal, I utilize a recently developed dynamic earthquake simulator EQdyna, based on an …
-
Connecting Time-scales: A Comprehensive Study of Faulting and Uplift in the Hellenic Subduction Forearc
… dynamics of faulting, vertical deformation, and stress within the Hellenic Subduction System (HSS) forearc, focusing on the islands of Kythira, Antikythira, Kassos, Karpathos, and Rhodes. Using techniques such as field mapping, analysis of high-resolution Digital Elevation Models (DEMs), seabed …
-
The paleostress history of the Central European basin system
… scope of this PhD thesis is to assess which paleostress fields controlled the evolution of the basin system. The present thesis introduces the “Stress Inversion via Simulation” (SVS) as a new strategy for estimating paleostress states. For a set of striated fault planes with known sense of slip …
-
Seismic Source characteristics that shape the Seismic Hazard Assessment in Greece
… what is typically expected for normal faulting. Stress inversion indicated a ∼25° clockwise rotation of the local extensional axis relative to the regional ∼north-south extension, possibly reflecting activation of older structures oblique to the contemporary stress field. On 12 March, the Mw 5.5 …
-
A Multiscale Approach towards the Characterisation of Upper Crustal Deformation at Passive Continental Margins: A Case Study on the Otway Basin, Australia
… providing an effective means of characterising stress and strain across space and time. The integration of these investigative methods at a passive continental margin for the first time, has assisted in reducing structural uncertainty for basin evolution models, delivering original insights into …
-
Structural Controls of the Neal Hot Springs Geothermal System, Eastern Oregon
… the geothermally related Neal fault zone. Stress inversion of kinematic data reveal an extensional stress regime, including an interpreted younger, southwest-trending (~243°), least principal stress and an older, west-trending (~265°) least principal stress. The geothermal field is bounded …
-
Sources of seismic hazard in British Columbia: what controls earthquakes in the crust?
… including source mechanism determination, stress inversion and earthquake relocations are used to determine where earthquakes occur and what forces influence faulting. We also determine if forces that control faulting can be monitored using seismic anisotropy. Investigating the processes …
Page 1 of 2