Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Stress-shielding effect"”.

  1. The Strain Distribution in the Proximal Femur: A Method for Evaluation of New Femoral Component

    … many researchers that disuse atrophy caused by stress shielding of the upper femur after implantation of the femoral component is the primary cause of bone resorption in the calcar region. The purpose of this study was to evaluate the effectiveness of a prototype prosthesis, that incorporates a …

    clemson Repository record for The Strain Distribution in the Proximal Femur: A Method for Evaluation of New Femoral Component (opens in a new tab)

  2. On Patellofemoral joint replacement - Clinical, radiological, and numerical studies.

    … joint replacement does not have a negative effect on the clinical outcome of later total knee replacement as assessed with standardised clinical and patient-relevant outcome measures. However, the stress-shielding effect of the femoral component in the Richards II patellofemoral joint …

    radboud Repository record for On Patellofemoral joint replacement - Clinical, radiological, and numerical studies. (opens in a new tab) Download PDF for On Patellofemoral joint replacement - Clinical, radiological, and numerical studies. (opens in a new tab)

  3. Optimized 3D-printing of Carbon Fiber-Reinforced Polyether-ether-ketone (CFR-PEEK) for Use in Overmolded Lattice Composite

    … properties, but this can additionally result in stress shielding due to a modulus mismatch between the bone tissue and implanted device. Polymeric implants reduce this stress shielding effect but have much lower mechanical properties, limiting their use. Polylactic acid (PLA) is a widely used …

    ut-knoxville Repository record for Optimized 3D-printing of Carbon Fiber-Reinforced Polyether-ether-ketone (CFR-PEEK) for Use in Overmolded Lattice Composite (opens in a new tab)

  4. Magnesium for biomedical applications as degradable implants: thermomechanical processing and surface functionalization of a Mg-Ca alloy

    … its low elastic modulus helps to reduce stress-shielding effect during bone healing. Mg- Ca alloys are particularly of interest for the additional processing and property benefits that Ca addition provides. The potential use of these alloys necessitates multi-faceted studies so that …

    waterloo Repository record for Magnesium for biomedical applications as degradable implants: thermomechanical processing and surface functionalization of a Mg-Ca alloy (opens in a new tab)

  5. Fault characterisation in the Pre-Zechstein succession of the Anglo-Dutch and East Pennine basins

    … be explained only by rotations of the regional stress field and the alternation of periods of tectonic extension and compression alone. There is a clear relationship between three profoundly different structural style types. A primary faulting mechanism resulting from regional tectonic stresses …

    oxford Repository record for Fault characterisation in the Pre-Zechstein succession of the Anglo-Dutch and East Pennine basins (opens in a new tab)

  6. Geometries and mechanics of veins and dykes

    … natural crack geometry can be used to infer paleostress conditions and propagation histories from the time of their initiation. It is suggested that veins initially propagate as essentially mode I (extension) fractures. Local crack- induced stresses generated through mechanical interaction, or by …

    soton Download PDF for Geometries and mechanics of veins and dykes (opens in a new tab)

  7. MECHANICALLY AND ELECTROCHEMICALLY STABLE MULTIFUNCTIONAL NANOTUBES FOR BIOMEDICAL APPLICATIONS

    … etc. 4) their low elastic modulus can provide stress gradient to the surrounding tissue, thereby preventing stress shielding effect and 5) its excellent corrosion resistance property due to its significantly thick TiO2 layer. Although many advantages of TNTs has been reported, some clinical …

    mtu Repository record for MECHANICALLY AND ELECTROCHEMICALLY STABLE MULTIFUNCTIONAL NANOTUBES FOR BIOMEDICAL APPLICATIONS (opens in a new tab)

  8. Analyzing the Effects of High Repetition Laser Shock Peening on Corrosion Resistance of Magnesium

    … properties similar to human bone, which avoids stress shielding effect, a major problem experienced with conventional implants. In addition, magnesium implants eliminate the need for successive surgery due to their biodegradable nature, which is inevitable in the case of conventional implants. …

    concordia Download PDF for Analyzing the Effects of High Repetition Laser Shock Peening on Corrosion Resistance of Magnesium (opens in a new tab)

  9. Optimization of the mechanical properties of the metallic components by micro-surface structuring and the improvement of the fatigue behavior

    … deformation during cyclic loading and its effect on cracking mechanism in cp-Ti.<br>Furthermore, despite the corrosion resistance of Ti, there is a considerable concern of ions release from the implants resulting from the reactions with the hostile body environment which leads to the …

    freiburg-diss Repository record for Optimization of the mechanical properties of the metallic components by micro-surface structuring and the improvement of the fatigue behavior (opens in a new tab)

  10. Applications and advanced sintering techniques of functionally graded ZnO-based thermoelectric material

    … are susceptible to degradation due to thermal stress cracking, which subsequently causes decreased lifetime. Previous efforts to prevent the thermal degradation have led to the following approaches: geometric pinning, compositional gradients, and segmentation of different materials. In the …

    colostate Repository record for Applications and advanced sintering techniques of functionally graded ZnO-based thermoelectric material (opens in a new tab)

  11. Η χρήση των βραχέων μεταφυσιακών στυλεών στην πρωτοπαθή οστεοαρθρίτιδα του ισχίου: ανάλυση πεπερασμένων στοιχείων (finite element analysis), πειραματική εμβιομηχανική μελέτη (experimental biomechanichal testing) και προοπτική, τυχαιοποιημένη συγκριτική μελέτη δυο διαφορετικών στυλεών σε ασθενείς με πρωτοπαθή οστεοαρθρίτιδα του ισχίου

    … FE models can be used for the calculation of stresses and strains at the implanted femurs. Furthermore, this study demonstrates that stress shielding effect cannot be avoided as proximal unloading of the femur was noted after the implantation of both short stem designs. A distally shifting …

    greece Repository record for Η χρήση των βραχέων μεταφυσιακών στυλεών στην πρωτοπαθή οστεοαρθρίτιδα του ισχίου: ανάλυση πεπερασμένων στοιχείων (finite element analysis), πειραματική εμβιομηχανική μελέτη (experimental biomechanichal testing) και προοπτική, τυχαιοποιημένη συγκριτική μελέτη δυο διαφορετικών στυλεών σε ασθενείς με πρωτοπαθή οστεοαρθρίτιδα του ισχίου (opens in a new tab)

  12. ADDITIVELY MANUFACTURED BETA–TI ALLOY FOR BIOMEDICAL APPLICATIONS

    … between bone and implant alloy reducing the stress shielding effect and improving implant morphology providing biological anchorage for tissue in-growth. In this scenario, the first goal of the present PhD thesis work was to identify a high-performance β-Ti alloy formulation suitable to …

    trento Repository record for ADDITIVELY MANUFACTURED BETA–TI ALLOY FOR BIOMEDICAL APPLICATIONS (opens in a new tab) Download PDF for ADDITIVELY MANUFACTURED BETA–TI ALLOY FOR BIOMEDICAL APPLICATIONS (opens in a new tab)

  13. Selective laser melting of Ti-35NB alloy: Processing, microstructure and properties

    … biocompatibility, corrosion resistance, and stress shielding effect are the key challenges for developing titanium biomaterials for orthopedic applications. Adding nontoxic alloying elements into titanium can solve the issues of toxicity and biocompatibility. One of the best solutions for …

    edithcowan Repository record for Selective laser melting of Ti-35NB alloy: Processing, microstructure and properties (opens in a new tab)

  14. Inspired by Nature: materials biomimicry to support human activities

    … and bearings. For this reason, and thanks to stress and deformation values similar to those of biological tissues, EAPs are also referred to as “artificial muscles” [1]. As far as magnesium foams are concerned, within a biomimicry outlook, the context of orthopedic surgery sets the morphology …

    poli-torino Repository record for Inspired by Nature: materials biomimicry to support human activities (opens in a new tab)

  15. Optimization of distribution of porosity of a short metaphyseal femoral stem with respect to the strain field and the micromotion

    … but long-term complications such as stress shielding and aseptic loosening can lead to hardware failure. Stems with increased porosity toward the distal end were discovered to be effective at reducing stress shielding; however, there is a lack of research on customized porous …

    greece Repository record for Optimization of distribution of porosity of a short metaphyseal femoral stem with respect to the strain field and the micromotion (opens in a new tab)