Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 45 for “"Stribeck"”.
-
Tribological Aspects of Journal Bearings Focusing on the Stribeck Curve
… of journal bearings as represented by the Stribeck curve. The behavior of lift-off speed and the factors that affect it are explored. An equation is proposed for predicting the lift-off speed. The comparison between the experimental results of oil- and grease-lubricated journal bearings …
-
Fundamental Characterization of Chemical Mechanical Planarization Relating to Slurry Dispensing and Conditioning Method
… new method for rapidly generating an "improved" Stribeck curve (i.e. Stribeck+ curve) that, compared to traditional Stribeck curves, shows a more complete tribological picture of the chemical mechanical planarization (CMP) process. The method significantly reduces the consumables and time …
-
An investigation into the reduction of stick-slip friction in hydraulic actuators
… avoidance. By rotating the piston and rod, the Stribeck region of the friction - velocity curve is avoided and the axial friction opposing the piston movement is approximately linearized. As a result, simpler, linear control techniques at low speeds may then be utilized. Simulation and …
-
Synthesis and Characterization of Nanostructured Materials And Tribological Studies Of CMP Retaining Rings
… in the ring-slurry interface by analyzing the Stribeck and Stribeck+ curves. Both methods gave consistent results with the lubrication mechanisms starting at “boundary lubrication,” and transitioning into “mixed lubrication” as pseudo-Sommerfeld numbers increased. Rings made of different …
-
Investigation of Acceleration Dependent Nonlinear Lubricated Friction in Hydraulic Actuation Systems
… the characteristics of friction is that of Stribeck in which the dependency of the friction force is based on velocity alone. However, experimentally, it has been found that lubricated friction is dependent on acceleration. Thus, the Stribeck model can be considered as a subset of a dynamic …
-
Desenvolvimento de metodologia para avaliação do desempenho tribológico de biolubrificantes
… foi realizado o levantamento das curvas de Stribeck dos biolubrificantes utilizando um tribômetro do tipo bloco-sobre-anel (BoR) do departamento de Engenharia Mecânica da Universidade de Coimbra. Além disso, também foi obtida a curva de Stribeck de um dos biolubrificantes, utilizando um …
-
Computer simulation of automotive disc brake noise
… The twodimensional model including damping, Stribeck effect and stick-slip friction was built. The model is unique in a way that all the similar models have been built using complicated FEM software. It is also unique because it considers the stick-slip phenomenon that has not been considered …
-
Pad-Wafer and Brush-Wafer Contact Characterization in Planarization and Post-Planarization Processes
… needed for constructing and interpreting Stribeck curves, and its application to processes where Stribeck curves fail to yield any useful data. Moreover, this method is applied to investigate the effect of brush roller design on scrubbing process and to analyze behaviors of eccentric …
-
Boundary Mode Frictional Properties of Articular Cartilage: Functional Implications of Lubricin Localization
… and validated, and a novel extension of the Stribeck curve, a "Stribeck surface," was created to map cartilage lubrication modes. The first aim identified the ability of exogenous lubricin to lubricate articular cartilage and characterized the differential roles of bound and soluble lubricin. …
-
Friction and lubrication behaviour of hip resurfacing metal-on-metal and ZTA ceramic on CFR peek implants with various diameters and clearances. Friction and lubrication behaviour of hip resurfacing Co-Cr-Mo and zirconia toughened alumina ceramic heads against carbon fibre reinforced poly-ether-ether-ketone cups with various diameters and clearances have been investigated using serum-based lubricants.
… along with Sommerfeld numbers leading to Stribeck analysis and hence the lubricating mode was also investigated. This involved using lubricants based on pure bovine serum (BS) and diluted bovine serum (25 vol. %BS+75 vol. %distilled water) with and without carboxymethyl cellulose (CMC) (as …
-
Multi-scale friction modelling of lubricant-surface interaction in tribological contacts
… determined by fitting the simulated lubrication Stribeck curve to the measured data for each of the selected biodiesels. Through this, a polynomial correlation is then obtained for the term χ as a function of the product of average number of carbon atoms and average number of double bonds for the …
-
VIBRATION INSTABILITY IN FRICTIONALLY DRIVEN ELASTIC MECHANICAL SYSTEM
… is manifested through three mechanisms termed Stribeck effect, mode-coupling and sprag-slip. Mechanical systems prone to vibrations by one or more of the three mechanisms of instability are considered and studied in detail. The mechanical systems fall into one of two groups. A system in the …
-
Identification non linéaire du modèle de frottement GMS pour l'amélioration de la commande des systèmes mécaniques
… la partie statique du frottement (frottement de Stribeck) basée sur une théorie non linéaire d'optimisation min-max. Cette approche permet d'identifier tous les paramètres du modèle de Stribeck en même temps et en particulier les paramètres qui agissent d'une façon non linéaire dans le modèle de …
-
Design optimization and efficiency modeling of a hot gas vane motor
… friction will also be considered. A model of Stribeck friction was developed to account for losses from friction. For the device to remain portable, there are limitations on the size of the final design which will restrict the optimal efficiency of the vane motor.
-
Friction and lubrication behaviour of metal-on-metal and ZTA ceramic-on-CFR PEEK hip prostheses. Friction and lubrication behaviour of metal-on-metal hip resurfacing and ZTA ceramic heads versus CFR PEEK cups wiith various diameters and clearances using serum-based lubricants with various viscosities.
… so as the friction factor can be calculated. Stribeck analysis was then employed to assess the mode of lubrication. For the metal-on-metal hip resurfacing joints, the friction factors were in the range 0.03-0.151 and those for the ZTA ceramic heads versus CFR PEEK cups were in the range …
-
Modeling and experimental validation of an ultrasonic rotary motor
… torque function. A rotor model based on the Stribeck effect, Coulomb and viscous friction is also incorporated to describe the friction torque associated with the motor response. An extensive series of experiments have been designed together with a state-of-the-art test bench built at the …
-
Tribological Study of Textured Surfaces created using Modulation Assisted Machining for Steel-Aluminum Contact
… the lubrication regimes. In this study, the Stribeck curve of untextured and textured surfaces created using vibration/modulation-assisted-machining are determined experimentally and numerically. Aluminum 6061-T6 disk mated with a high speed steel pin are studied in a pin-on-disk tribometer …
-
SYNOVIAL FLUID LUBRICATION IN DISEASE: CHARACTERIZATION, MECHANISMS, AND THERAPY
… important and novel concepts; notably, (1) the Stribeck framework was applied successfully for the first time to synovial fluid, (2) effective viscosities of synovial fluid were calculated and applied to compare lubricating properties, and (3) finally, the lubricating effect of HA …
-
Control and prediction of the performance of lubricated tribosystems: experiments and data-driven AI models
… electrically-conductive fluid by analyzing its Stribeck behavior under different intensities of magnetic fields. This works aims to elucidate the potential of externally applied electromagnetic fields to achieve reversible and non-invasive control of friction in lubricated tribosystems, and to …
-
Pitting of Rolling and Sliding Steel Discs by fire-Resistant Fluids
… been studied using an Amsler2-disc machine. A stribeck curve was plotted for the system and it is shown that pitting damage is dependant on the region of the curve in which the system is operated, pitting life being a minimum in the mixed-elastohydrodynamic region. Wear rates were found to be …
Page 1 of 3