Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Strontium ferrite"”.
-
Phase formation and structural transformation of strontium ferrite SrFeOx
Non-stoichiometric strontium iron oxide is described by an abbreviated formula SrFeOx (2.5 ≤ x ≤ 3.0) exhibits a variety of interesting physical and chemical properties over a broad range of temperatures and in different gaseous environments. The oxide contains a mixture of iron in the trivalent …
-
Study of Systematic Error in Biaxial Torque, and Magnetic Characterization of Strontium Ferrite
… investigates the magnetic torque of 3D-printed strontium ferrite/PA-12 samples using a biaxial VSM and compares these measurements with those from a torque magnetometer. Torque curves were recorded from 16-22 kOe at 2 kOe intervals for a 4.8 mm wire and a 1.23 mm dot sample using a MicroSense …
-
The Effect of Flow on the Magnetic Anisotropy of 3D-Printed Strontium Ferrite/PA12 Magnetic Composites
… shapes and controlled properties. In this work, strontium ferrite (SFO) particles mixed with polyamide 12 (PA12) are used to 3D print magnetic composites. During the printing process, the flow of the material through the nozzle creates shear forces and torques that align the magnetic particles, …
-
The Impact of the Silane Treatment on Mechanical and Magnetic Properties of PA12 and Strontium Ferrite Composite
… of a composite. Magnetic powder, i.e., Strontium ferrite (SF), is treated with varying concentrations of silane using different mixing experimental setups. The treated samples were characterized using Thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), Scanning …
-
Development and use of a new curvature relaxation technique to measure the in situ oxygen surface exchange coefficients and stress of lanthanum strontium ferrite films
Solid oxide fuel cells (SOFCs) provide fuel flexibility and the highest efficiency of any chemical-to-electrical energy conversion technology. Unfortunately, slow oxygen transport, especially that caused by low surface exchange kinetics at the cathode, limits overall SOFC performance. In the common …
-
Theoretical Investigation and Experimental Design of Practical Millimeter Wave Isolaters
… of resonant frequency of a single crystal ferrite isolator at 58 kMc. The derivation takes into account the ferrite isolator as a bounded system. Using this relation, equations are derived which relate line width to resonant frequency, line width to bandwidth, and line width to applied …
-
Evidence for non-collinear magnetic structure at low temperature in M-type hexaferrite
… ME multiferroics reported, M-type hexaferrite shows potential for device applications as they exhibit a low field ME effect at room temperature. The observed magnetoelectric properties in Co-Ti doped strontium M-type hexaferrrite are associated with the presence of the non-collinear …
-
A 3d printing and moulding method of the fabrication of a miniature voice coil motor actuator
… applications. Polydimethylsiloxane (PDMS) and strontium ferrite (SrFe) nano powder were used as the main structural material. Young’s modulus and the magnetization of the material with SrFe-doping ratios ranging from 20% to 60% by weight were characterized. The actuator, consisting of four …
-
Developing High-Performance Polyamide Bonded Magnet for Magnetic Field Assisted Additive Manufacturing (MFAAM) Process
… (FFF) AM technique was used to 3D print strontium ferrite (SFO) bonded magnets using high-performance Polyamide 4.6 (PA4.6) binder, which was developed via the twin screw compounding process. By applying a magnetic field of 0.3 - 0.5 Tesla transverse to the print direction, a magnetic …
-
Design and Application of Conformal Magnetic and Graphene Waveguide Antenna
… achieved are 12 and 29.5 respectively of strontium ferrite material. Then the measured data was used to design and simulate the ferromagnetic waveguide with High Frequency Structure Simulator (HFSS) software from ANSOFT. The simulation results of 25.4 cm × 17 cm × 0.0125 cm ferromagnetic …
-
The Interplay of Spin, Charge, and Heat: From Metal/Insulator Heterostructures to Perovskite Bilayers
… we explore the spin-flopped coupled lanthanum strontium ferrite (LSFO) lanthanum strontium manganite (LSMO) bilayer grown on a lanthanum strontium aluminate (LSAT) substrate. This research focuses on the possible control of magnetic moments using current pulses.
-
Microfabrication technology for an integrated monolithic electromagnetic microactuator based on polymer bonded permanent magnet.
… surface micromachined polyimide beam and Strontium ferrite/EPOFIX permanent magnet (diameter of 460 μm and 30 μm thickness). Large deflection in excess of 100 μm at 35 mA driving current and magnetic force of 0.39 μN/mA have been achieved. It compares favourably with other much larger …
-
Synthesis, characterization, and enhanced magnetic properties of iron carbide nanomaterials
… magnetic properties comparable to that of hexaferrite materials. Unfortunately, CoxC magnets have a low magnetic saturation (50 emu g-1) which drastically lowers its energy product. Alternatively, iron carbide has a rather high bulk magnetization value of 140 emu g-1 and is composed of …
-
Θεωρητική και πειραματική μελέτη του μαγνητικού ιξώδους
… ‘families’ of permanent magnets: hexagonal strontium ferrite with rare earth and cobalt substitutions (La0.2Sr0.8Co0.2Fe11.8O19), neodymium-iron-boron (Nd2Fe14B), and a samarium-cobalt compound (Sm[Co0.74Fe0.1Cu0.12Zr0.04]8.5).In all three materials, at first their chemical composition was …
-
Development of Polymer Bonded Magnetic Composite using Magnetic Field Assisted Additive Manufacturing (MFAAM)
… Polyamide 12 (PA12), also known as Nylon12, and Strontium Ferrite (SrFe12O19) composites have been identified as ingredients for affordable manufactured composites suitable for applications in magnetic devices. The utilization of Magnetic Field-Assisted Additive Manufacturing (MFAAM) enables the …
-
An electron paramagnetic resonance investigation of the defect chemistry of the(Sr1-[ypsilon]La[ypsilon])(Ti1-[chi]Fe[chi])O3-[delta] system
Strontium Titanate, SrTiO3, is an end member of the Sr(Ti1‒xFex)O3‒δ solid solution system where x = 0. As x varies from 0 to 1 to produce strontium ferrite, SrFeO3, the properties of the material transform from that of a metal oxide wide gap semiconductor to a metal oxide material that displays …
Page 1 of 2