Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Structural Simulations"”.

  1. Chemical processing and structural simulations of electronic materials in the barium-oxide - titanium-dioxide system

    Novel low temperature wet chemical processes for the synthesis of gels and ultrafine powders of BaTiO₃ and BaTi₄O₉ were developed. Under acidic conditions a titanyl acylate precursor was obtained by molecular modification of titanium isopropoxide. In the sol-gel process, amorphous BaTiO₃ gels …

    arizona-thes Repository record for Chemical processing and structural simulations of electronic materials in the barium-oxide - titanium-dioxide system (opens in a new tab)

  2. Thermal-Fluid-Structure Interaction Modeling of Outdoor Digital Displays

    … inside the unit lead to flow-induced structural deflections. Severe deformations could cause flow obstruction of the cooling cavities around the LCD, leading to increased temperatures on the display potentially damaging the LCD. This thesis presents Computational Fluid Dynamics and …

    gatech Repository record for Thermal-Fluid-Structure Interaction Modeling of Outdoor Digital Displays (opens in a new tab)

  3. Method development for frame design of electric motorcycles

    … bike and what the use case is. To think of the structural characteristics when designing can make the design process simpler and quicker. Extensive studies can take time and are not always necessary in early design if simple simulations has been done through the process. Early simulations can …

    chalmers Repository record for Method development for frame design of electric motorcycles (opens in a new tab)

  4. Transferring Information from CFD to FE Thermal Analysis. Application to a cooling film.

    … A method using 1D thermal loads for the structural simulations was compared a newly proposed method using 2D Thermal loads. Two inhouse codes BCgen2 and BCgen_2D_mapping from GKN Aerospace were used to supply thermal loads of one and two dimensions respectively. Conjugated CFD was used as …

    chalmers Repository record for Transferring Information from CFD to FE Thermal Analysis. Application to a cooling film. (opens in a new tab)

  5. Wood-based 3D printing for space innovation in emergency and social housing production

    … is proposed. In the initial stage with structural simulations, this research explores the optimization possibilities of the architectural elements with the relationship proposed, and suggests possible applications and future developments.

    ubc Repository record for Wood-based 3D printing for space innovation in emergency and social housing production (opens in a new tab) Download PDF for Wood-based 3D printing for space innovation in emergency and social housing production (opens in a new tab)

  6. Implementação do ensaio stress sweep rutting e do shift model para a previsão da deformação permanente e misturas asfálticas brasileiras

    … test, from the so-called Shift Model and from structural analyzes of the pavement in the FlexPAVETM program. Three asphalt mixtures used in the field were analyzed and their performance in the field was compared with laboratory results, which allowed the development of a preliminary transfer …

    brazil-uerj Repository record for Implementação do ensaio stress sweep rutting e do shift model para a previsão da deformação permanente e misturas asfálticas brasileiras (opens in a new tab)

  7. From Machine Enclosure to Pressurised Build Chamber - Enabling Additive Manufacturing of Large Components in Inert Environments

    … ceiling, corners, and panel joints, while structural simulations identified weaknesses in the active protection panels and part of the skeleton. Based on these findings, sealing and reinforcement concepts were developed and evaluated. The final solution was to implement metal plates and …

    chalmers Repository record for From Machine Enclosure to Pressurised Build Chamber - Enabling Additive Manufacturing of Large Components in Inert Environments (opens in a new tab)

  8. Flash lamp annealing and photoluminescence imaging of thin film silicon solar cells on glass

    … (FLA) experiments in Chapter 1, FLA thermal and structural simulations in Chapter 2, and Photoluminescence (PL) Imaging in Chapter 3. The first and second chapters aim to gauge the feasibility of replacing the existing belt furnace Rapid Thermal Process (RTP) with FLA for Silicon (Si) films on a …

    unsw Repository record for Flash lamp annealing and photoluminescence imaging of thin film silicon solar cells on glass (opens in a new tab)

  9. Numerical investigation of bond deterioration in ASR-affected reinforced concrete beams with lap splices

    … in regions with lap splices, where structural continuity depends entirely on effective bond. This thesis addresses the need for improved characterization of bond behavior in ASR-affected reinforced concrete beams with spliced bars. First, existing bond- slip models are examined, …

    texas Repository record for Numerical investigation of bond deterioration in ASR-affected reinforced concrete beams with lap splices (opens in a new tab)

  10. Modelling and testing of thermoplastic composite components using Building Block approach integrating process simulation.

    … of replacing metals with composite materials for structural and non-structural applications. This is mainly driven by the demand for lighter and increasingly complex components, which will be extremely difficult to fabricate with the traditional metal forming approaches. This prompted the need for …

    poli-torino Repository record for Modelling and testing of thermoplastic composite components using Building Block approach integrating process simulation. (opens in a new tab)

  11. Towards multidisciplinary design optimization capability of horizontal axis wind turbines

    … these strategies are based on nonlinear aero-structural dynamics providing additional benefits to components beyond the blades. These innovations will require Multi-disciplinary Design Optimization (MDO) to realize the full benefits. This research expands the MDO capabilities of Horizontal …

    uvic Repository record for Towards multidisciplinary design optimization capability of horizontal axis wind turbines (opens in a new tab)

  12. Three-Dimensional Simulations of Ductile Fracture Under Arbitrary Loadings

    … subroutines to enable three-dimensional structural simulations of crack initiation and growth. Illustrations are given to simulate ductile failure in a round notched bar and a top-hat shear specimen developed at the Sandia National Laboratories. Finally, the formulation is extended to …

    tamu Repository record for Three-Dimensional Simulations of Ductile Fracture Under Arbitrary Loadings (opens in a new tab)

  13. Up on the Roof: Strategies, Capacity, and Environmental Impacts of Vertical Extensions

    … and technical strategies globally. While reserve structural capacity in existing buildings is known as a key opportunity for VEs, there is limited research that quantifies this capacity in different building types, with different VE structures. Whilst environmental benefits of VEs are widely …

    unsw Repository record for Up on the Roof: Strategies, Capacity, and Environmental Impacts of Vertical Extensions (opens in a new tab)

  14. A comparison of elastic mooring systems for floating wave energy converters

    … component implemented. Coupled hydrodynamic-structural simulations are carried out with different mooring configurations under operational loads. The heave motions of the WEC device and the force response in the mooring lines under operation conditions are obtained from the simulation results …

    chalmers Repository record for A comparison of elastic mooring systems for floating wave energy converters (opens in a new tab)

  15. Engineer-Friendly Synergetic Methodology for Surrogate Modeling of Complex Connections by Modal-Based Low-Fidelity Finite Element Model Updating Approach

    … of structures. They can also be utilized for structural condition assessment and health monitoring. However, due to software limitations, simplifying assumptions, and lack of knowledge about the system properties, the predictions of the numerical models may deviate from laboratory or field …

    unh-thes Repository record for Engineer-Friendly Synergetic Methodology for Surrogate Modeling of Complex Connections by Modal-Based Low-Fidelity Finite Element Model Updating Approach (opens in a new tab)

  16. Damage progression quantification and data robustness evaluation in self-powered sensors networks

    … and data robustness evaluation approaches, for structural health monitoring (SHM), using a new class of self-powered piezo-floating-gate (PFG) sensors. This system relies on harvesting the mechanical energy from structures through the direct effect of piezoelectricity. The operating power of the …

    msu Repository record for Damage progression quantification and data robustness evaluation in self-powered sensors networks (opens in a new tab)

  17. Computational Modeling of Transcatheter Aortic Valves

    … enough long-term valve durability data, accurate structural simulations and computational modeling become an integral part of the evaluation. Thus, the objectives of this dissertation were to employ in-vitro experiments and inverse finite element (FE) analyses to obtain accurate material …

    denver Repository record for Computational Modeling of Transcatheter Aortic Valves (opens in a new tab)

  18. Modeling the Influence of Vibration on Flow Through Embedded Microchannels

    … This was done using a series of computational simulations of geometric changes to, and perfusion through, microchannels embedded in VF models. A computational structural model based on synthetic VF models used in previous experimental studies was first developed. The model and its embedded …

    byu Repository record for Modeling the Influence of Vibration on Flow Through Embedded Microchannels (opens in a new tab) Download PDF for Modeling the Influence of Vibration on Flow Through Embedded Microchannels (opens in a new tab)

  19. An Integrated Design Approach of Rotor Assembly for Radial Flux Surface-Mounted Permanent Magnet Synchronous Motors

    … poses a considerable challenge in maintaining structural integrity among the components. Redesigning components to reduce assembly complexity and weight necessitates careful consideration of boundary conditions and contact modeling to prevent catastrophic failures like magnet fly-by conditions. …

    mcmaster Repository record for An Integrated Design Approach of Rotor Assembly for Radial Flux Surface-Mounted Permanent Magnet Synchronous Motors (opens in a new tab)

  20. Reproducible fluid structure interaction for complex flows in engineered systems

    … consideration for AM. Results obtained from simulations using ANSYS Polyflow help relating polymer flow through the flow channel to several applied parameters used by the extrusion industry. This provides a means to evaluate a tool's design virtually before implementing it in production. The …

    njit Repository record for Reproducible fluid structure interaction for complex flows in engineered systems (opens in a new tab)

Page 1 of 2