Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 118 for “"Structural damping"”.
-
Effect of Bolted Joint Preload on Structural Damping
… for bolted joint structures. Understanding the damping and frequency response to a varying preload in a single-bolted lap-joint structure can be very helpful in predicting and analyzing more complicated structures connected by these joints. In this thesis, the relationship between the bolt …
-
Efficient frequency response computation for structures with structural damping
… in dimension. Typically, more than one level of structural damping is present in a complex structure. This results in a fully populated modal damping matrix, so that the frequency-dependent coefficient matrix of the modal FRP is full. This problem is traditionally solved using a brute-force …
-
Finite Element Model of a Timoshenko Beam with Structural Damping
… with mass, stiffness, and small nonlinear damping. The nonlinearity is cast as a pseudo-force to avoid repeated recalculation and decomposition of the effective stiffness matrix; thus, the solution technique is dubbed the "pseudo-force Newmark method." Comparisons with exact and …
-
Analytical and experimental studies of beam waveguide absorbers for structural damping
The reduction of structural vibrations in ships and submarines is a long standing concern of the Navy. Waveguide absorbers are very effective devices which can be applied to this problem. This study evaluates the increase in vibration damping of a plate structure across a broad frequency range …
-
A Comprehensive Experimental Evaluation of Actively Controlled Piezoceramics with Positive Posistion Feedback for Structural Damping
… positive position feedback (PPF) for reducing structural vibrations. A comparison is made between active control with PPF and a parallel resistor-inductor (RLC) shunt technique. The primary objectives of this study are to: 1. Explore the feasibility of using smart materials and fiber optics for …
-
RECIPROCITY-BASED TRANSFER FUNCTION TECHNIQUES FOR ACOUSTIC SOURCE RECONSTRUCTION, SPRING ISOLATOR CHARACTERIZATION AND STRUCTURAL DAMPING ASSESSMENT
… conditions. The third study investigates structural damping treatments, which are commonly quantified using composite damping loss factor, a metric that does not directly account for the sound radiated by the structure. Vibroacoustic reciprocity is applied to obtain sound power transfer …
-
The influence of structural damping on the internal fluid pressure during a fluid transient pipe flow
Thesis (Ph. D.)--Michigan State University. Department of Civil Engineering, 1988
-
Investigations on Void Formation in Composite Molding Processes and Structural Damping in Fiber-Reinforced Composites with Nanoscale Reinforcements
… vibrational loads during service, and improved damping characteristics of the composite structure are desirable. To this end, a second goal is to explore the use of matrix-embedded nanoscale reinforcements to augment the inherent damping capabilities in FRCs. The first objective is addressed …
-
On the characterisation of structural damping in wind turbine blade composite materials : an approach using dynamic mechanical analysis and experimental modal analysis
… loads leads to complex and poorly understood damping mechanisms. Despite the advantages of these materials, current experimental approaches have failed to capture the directional variations in damping behaviour. This has led to an identifiable knowledge gap, which has resulted in non-optimised …
-
Diagonal plus low rank approximation of matrices for solving modal frequency response problems
… materials have significantly different levels of structural damping, this can increase the cost of solving the modal frequency response problem substantially. Even if the rank of the contribution to the finite element structural damping matrix from the second material is very low, the matrix …
-
Aerodynamic instability of inclined cables.
… some parameters on it. These parameters are the structural damping and cable surface roughness, which may have significant impact on the vibration characteristics. The test results showed both the divergent type of galloping instability and the limited amplitude high wind speed vortex shedding …
-
Active damping of vibration in large space structures using a Karhunen-Loeve reduced order model
… results have shown that in the limit as the structural damping approaches zero the Karhunen-Loeve mode shapes and natural mode shapes converge. Numerical techniques are applied to evaluate the structural damping required for convergence. Once the Karhunen-Loeve mode shapes are determined, the …
-
Vibration analysis of a pole structure
… modes. A method is included for accounting for structural damping.
-
Exploring the structure and mechanics of multifunctional graphene oxide-based composite films
… promising class of such materials is lightweight structural damping films-based graphene oxide (GO), a relatively inexpensive and waterprocessable sister of graphene. The damping functionality is essential for protecting sensitive components from damage caused by vibrations and potentially impact. …
-
Inelastic Dynamic Response of Two-Story Steel Frame Under Single and Dual Blast Loading
… equilibrium. The effects of the degree of damping and steel yield stress on the frame performance are also identified. Terrorist bombings of buildings have become increasingly prevalent and need to be accounted for when designing structures to prevent excessive deformations and collapse …
-
Dynamic analysis of the flexible boom in the N-ROSS Satellite.
… of the boom, the spin-up procedure and the structural damping on the pointing error of the LFMR are investigated by performing the dynamic simulation using the Dynamic Simulation Language. Two cases of boom material. Aluminum Alloy and the Graphite, epoxy composite material, are analyzed and …
-
Magnetoelasticity, magnetic forces and magnetostriction in electrical machines
… for these machines. Moreover, the effects of structural damping and of different approaches (quasi-static, dynamic, coupled and uncoupled) are illustrated. The magnetostriction, as well as the magnetisation of electrical steel sheets, is measured within this work. The measurements are carried …
-
ON THE STABILITY OF VARIABLE HELIX MILLING TOOLS
… an experimental setup that scaled not only the structural dynamics but also the cutting force coefficients was proposed. Therefore, it was possible to attain larger axial depths of cut while assuming linear dynamics. The variable-helix process stability was modelled using the semi-discretization …
-
Decentralized control of sound radiation from periodically stiffened panels
Active structural acoustic control has previously been used to reduce low-frequency sound radiation from relatively simple laboratory structures. However, significant implementation issues have to be addressed before active control can be used on large, complex structures such as an aircraft …
Page 1 of 6