Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Structural finite element analysis"”.
-
Hierarchical Flux-Based Thermal-Structural Finite Element Analysis Method
A hierarchical flux-based finite element method is developed for both one- and two-dimensional thermal-structural analyses. Derivation of the finite element equations is presented. The resulting finite element matrices associated with the flux-based formulation are evaluated in closed-form. The …
-
Thermal and structural finite element analysis of early-age mass concrete structures
… (two blocks), is analyzed. The numerical analysis is carried out using commercial software, which uses the finite element method revealed the magnitude and the internal residual stress distribution. (Abstract shortened by UMI.)
-
Heteromorphic to Homeomorphic Shape Match Conversion Toward Fully Automated Mesh Morphing to Match Manufactured Geometry
… Further approximations are made during the analysis portion of the design process. Manufacturing defects can also occur, which increase the discrepancies between the design and manufactured geometry. These approximations combined with manufacturing defects lead to discrepancies which, for …
-
Finite Element Analysis of a Nose Gear During Landing
… a nose gear of an aircraft during landing using structural finite element analysis. The nose gear was first modeled using computer-aided design software and then imported into finite element software. The external forces were determined analytically and the interactions between components were …
-
An Investigation on the Aerodynamic and Vibration Characteristics of a Dielectric Elastomer Membrane
… of the membrane are found. Computational analysis using a structural finite element analysis is used to obtain the modal response and study the effect of voltage application. A wind-tunnel testing setup and data acquisition system is used to analyze the experimental aerodynamic …
-
Composite material repair and reliability
… state). The approach adopted is to utilize structural finite element analysis to compute the state and of the candidate repaired state. The reliability of these two spatially non-uniform stresses is computed by a probabilistic failure criterion. Thus, we can optimize the repair configuration …
-
Topology Optimization of Nonlinear Elastic Structures and Compliant Mechanisms
… area of topology optimization which combines structural finite element analysis with nonlinear programming and design sensitivity analysis. The goal of the structural topology problem is to determine the optimal distribution of material within a design domain that minimizes a given cost …
-
Prolonged Exposure to Microgravity Increases Susceptibility to Traumatic Brain Injury
… Human Model for Safety, or THuMS) along with a structural finite element analysis software (LS-Dyna), we were able to replicate the effects of microgravity on cerebral structures and subject the SANS-altered models to a variety of loading events. An unmodified THuMS model was used as a control …
-
A model of stabilizer roll bearing for a continuous hot-dip galvanizing line
… dimensioned using CAD software Pro-Engineer. The structural finite element analysis performed in ANSYS 10.0.
-
Aeroelastic design of a lightweight distributed electric propulsion aircraft with flutter and strength requirements
… with distributed electric propulsion using structural and aeroelastic constraints. The governing equations for the coupled aeroelastic system form the basis of the static aeroelastic and flutter analysis. In this work, the Doublet-Lattice method is used to evaluate the aerodynamic forces …
-
Investigations in structural optimization of nonlinear problems using the finite element method
Structural optimization is an important field in engineering with a strong foundation on continuum mechanics, structural finite element analysis, computational techniques and optimization methods. Research in structural optimization of linear and geometrically nonlinear problems using the force …
-
Numerical modelling and analysis of blood flow through compliant, size-mismatched arterial anastomoses in reconstructive surgery.
… of non-Newtonian blood flow is coupled to a structural Finite Element Analysis (FEA) visco-hyperelastic model of the vessel wall. The CFD model incorporates a Windkessel representation of the donor flap, with a time-varying recipient pressure inlet (allowing the formation of Womersley inlet …
-
Investigation and model development of pressure relief valve leak tightness
… requires efficient coupling of a non-linear structural Finite Element Analysis (FEA) with a Computational Fluid Dynamic (CFD) solver. This allows the examination of the relationship between deformation of the contacting surfaces, based on the applied spring force, and the resultingmicro-flow …
-
Electromagnetic and Structural Comparison of Ultra-Wideband Antenna Radomes
… radomes with quartz over S2-glass fibers. Structural finite element analysis is performed to determine new laminate designs for each of the panel solutions. While the mechanical properties of the S2-glass/epoxy material are widely available, information regarding the quartz material is …
-
A comprehensive protocol for inspection and assessment of aging steel bridges: experiments, computations and 3D laser scanning of field corroded girders
… presenting signs of deterioration with some elements exhibiting significant deficiencies in conditions and functionality. Regarding the transportation network condition, from the over than 600,000 bridges which are included in the National Bridge Inventory, 46,154 of them are characterized as …
-
Ανάλυση φορέων με συμβατικά, προσαρμοστικά και στοχαστικά πεπερασμένα στοιχεία σε διαδικτυωμένους ηλεκτρονικούς υπολογιστές
… engineering approach towards parallelism for the Finite Element (FE) analysis of a structural model involves the partitioning of the FE mesh into submeshes called subdomains. This process, termed as domain decomposition, has served as the basis for the development of efficient matrix handling …
-
Stability of Steel Structures
… an axial load and bending moment. In first-order analysis the effects of axial forces on the stiffness formulation and their influence on deformations of the members are usually neglected. If the axial forces are sufficiently large, a better indication of the distribution of the forces and moments …