Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Strut and Tie Modelling"”.
-
FRP STRENGTHENING OF NON-FLEXURAL REINFORCED CONCRETE MEMBERS BASED ON STRUT-AND-TIE MODELLING
This thesis presents both experimental and analytical investigations on the FRP strengthening of tie members and strut members. A case study of RC corbels strengthened with FRP systems based on strut-and-tie modelling was also conducted.
-
3D Strut-and-tie modelling interactive design using peridynamics: Development of a tool for generating strut-and-tie models using peridynamics combined with optimisation for an efficient reinforcement placement
… investigated in the ultimate limit state with a Strut-and-Tie Model (STM). By using STM the structure is designed by a lower bound approach according to the theory of plasticity. This makes the design conservative, assuming that the concrete structure can undergo sufficient plastic deformation. …
-
Tests on Concrete Beams with GFRP Flexural and Shear Reinforcements & Analysis Method for Indeterminate Strut-and-Tie Models with Brittle Reinforcements
… of glass fibre reinforced polymer (GFRP) bars and stirrups as internal reinforcement for concrete beams. Fibre reinforced polymer bars are geometrically similar to conventional steel reinforcement. They are made of a bundle of long glass fibres bound together by a polymer matrix. The bars are …
-
Shear Strength Assessment of Corrosion-Damaged Prestressed Concrete Girders
… which accelerates the deterioration rate and can result in a complete loss of the concrete cover and exposure of the reinforcing and prestressing steel. This causes degradation in the load-carrying capacity of the bridge girders. Consequently, decisions need to be made on whether to …
-
Nonlinear structural analysis using strut-and-tie models
Increasing popularity of the strut-and-tie methodology among research communities and practising engineers is due to its rational analytical approach and its superiority, compared to the conventionally employed empirical methods for analysing disturbed regions in structural systems. Nevertheless, …
-
Behaviour of corbels reinforced with headed-end GFRP bars
… commonly found in bridges, industrial buildings, and parking structures throughout North America. Corbels are structural elements with low shear span-to-depth ratio that transfer vertical and horizontal loads to other members such as columns or walls. Given that the vast majority of RC …
-
Torsion in Helically Reinforced Prestressed Concrete Poles
… poles are commonly used as street lighting and electrical transmission poles. Typical concrete lighting poles experience very little load due to torsion. The governing design loads are typically bending moments as a result of wind on the arms, fixtures, and the pole itself. The Canadian pole …
-
Shear Behaviour of Disturbed Regions in Reinforced Concrete Beams with Corrosion Damaged Shear Reinforcement
… by the corrosion of reinforcing steel. An understanding of the forces involved in the load carrying mechanisms is imperative; the transfer of shear forces in reinforced concrete beams is one of these load carrying mechanisms. The shear transfer mechanism is different near the end of beams, …