Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 62 for “"Strut-and-Tie Model"”.
-
Strut-and-tie model design examples for bridge
Strut-and-tie modeling (STM) is a versatile, lower-bound (i.e. conservative) design method for reinforced concrete structural components. Uncertainty expressed by engineers related to the implementation of existing STM code specifications as well as a growing inventory of distressed in-service bent …
-
Strut-and-Tie Modeling of Multistory, Partially-Grouted, Concrete Masonry Shear Walls with Openings
… evolving in order to adapt to physical locations and economic conditions. These adaptations may result in more cost-effective designs, but may also come at a cost of strength. In masonry shear walls, it is becoming more common to reduce the amount of grouting from every cell to only those with …
-
Behaviour of continuously supported self-compacting concrete deep beams
… were the shear span-to-depth ratio, the amount and configuration of web reinforcement and the main longitudinal reinforcement ratio. All beams failed due to a major diagonal crack formed between the applied mid-span load and the intermediate support separating the beam into two blocks: the first …
-
Evaluation of the shear behavior of inverted T-deep beams reinforced with high-strength steel bars
… congestion, improving corrosion resistance, and material cost efficiency. Current design codes such as AASHTO LRFD (2024) and ACI 318-19 permit the use of HSS in different structural usage but their provisions remain limited particularly for Strut-and-Tie model application in disturbed …
-
Evaluation of strut-and-tie modeling for bridge pier applications
Strut-and-tie modeling is an analysis and design tool for reinforced concrete elements which assumes that internal stresses are transferred through a truss type mechanism. The tensile ties and compressive struts serve as truss members connected by nodal zones. The internal truss idealized by the …
-
Seismic retrofit of reinforced concrete beams, columns, and joints with thin steel sheets and steel plates
… of reinforced concrete (RC) beams, columns, and their joints with lightweight steel sheets and steel plates, to validate the retrofit technique with testing of two 4/5-scaled beam-column assemblage specimens, and to develop a strut-and-tie model to ascertain the force transfer mechanism of …
-
Automatic design of concrete structures using a strut & tie approach
… in this thesis is an investigation of the strut and tie method for designing 2-D in-plane, reinforced concrete structures. Two important issues relating to this method are addressed. Firstly, the issue of visualising an appropriate strut and tie model is dealt with. In many situations it …
-
Structural Behaviour of Conventional and FRP- Reinforced Concrete Deep Beams
… such as pile caps, girders, foundation walls and offshore structures include the use of reinforced concrete deep beams as structural elements. The structural behaviour of deep beams is affected by its span to depth ratio, type of loading, reinforcement ratio in vertical and horizontal …
-
The Development of a Steel Embedded Connection for Double-Tee Beams
… as a shooter. The shooter is provided in capacities, a 40 kip capacity shooter and a 50 kip capacity shooter. This steel connection is embedded near the end of a double-tee prestressed girder. Double-tee prestressed girders are a primary component used in the construction of parking garages. …
-
3D strut-and-tie design recommendations for column and drilled shaft anchorages in drilled shaft footings
… strain distribution, known as D-regions, and therefore recommended to be designed using the strut-and-tie method (STM). Drilled shaft footings supported on four drilled shafts require a three-dimensional (3D) configuration of struts and ties to reproduce the internal force flow of the …
-
Shear Behaviour of Disturbed Regions in Reinforced Concrete Beams with Corrosion Damaged Shear Reinforcement
… by the corrosion of reinforcing steel. An understanding of the forces involved in the load carrying mechanisms is imperative; the transfer of shear forces in reinforced concrete beams is one of these load carrying mechanisms. The shear transfer mechanism is different near the end of beams, …
-
Drilled Shaft Socket Connections for Precast Columns in Seismic Regions
… of connection between a precast concrete column and a drilled shaft has been developed for Accelerated Bridge Construction (ABC) in regions of moderate or high seismicity. This connection can be built quickly and allows generous placement tolerances. Three quasi-static tests of connections …
-
The anchorage behavior of headed reinforcement in CCT nodes and lap splices
… was studied using full scale tests of CCT nodes and lap splices. The mechanics of the anchorage behavior were observed and recorded to evaluate the manner in which the capacity of a headed bar is developed. The measured data were used to evaluate existing models of headed reinforcement anchorage …
-
Experimentally Validated Compatibility Strut and Tie Modeling of Reinforced Concrete Bridge Piers
A compatibility-based strut-and-tie model C-STM is proposed for analyzing deep beams and disturbed regions with particular emphasis on reinforced concrete bridge piers. In addition to the normal strut-and-tie force equilibrium requirements the model accounts for non-linear behavior through …
-
Plain and Steel-Reinforced Concrete Shear Walls With and Without CFRP Retrofitting
… presents the outcome- of a study of the behavior and strength of plain and steel-reinforced concrete shear walls with and without a window opening and Carbon Fiber-Reinforced Polymer (CFRP) retrofitting. A total of seven tests were conducted using six different shear walls. Each wall was subjected …
-
A critical review of the symmetric punching shear of reinforced concrete flat slabs.
An experimental investigation on model slabs and on a 1/3 scale composite bridge deck showed that the ultimate punching shear load depends on the shape of the loaded area, the compressive strength of concrete, the flexural reinforcement ratio and on the arrangement of steel bars. Punching failure …
-
Behavior of drilled shaft footings under pure compression loading and proposal of 3D strut-and-tie method
Strut-and-tie method was intended to provide more realistic strength estimation and detailing requirements for deep structural members such as deep beams, bent caps, and drilled shaft footings, also commonly referred to as pile caps. Two-dimensional strut-and-tie model was well refined and adopted …
-
Shear design of pile caps and other members without transverse reinforcement
… are the transverse splitting of compression struts confined by plain concrete, the development of a rational design procedure for deep pile caps, as well as a general study of the shear transfer mechanisms of concrete beams. Three-dimensional compression struts that are unreinforced and …
-
Linear and Nonlinear Finite Element Analyses of Anchorage Zones in Post-Tensioned Concrete Structures
Linear and nonlinear finite element analyses are used for the investigation of rectangular anchorage zones with the presence of a support reaction. The investigation is conducted based on four load configurations consisting of concentric, inclined concentric, eccentric, and inclined eccentric …
-
A study of shear behavior of reinforced concrete deep beams
… is complex. Nonlinear distribution of strain and stress must be considered. Prior to 1999, ACI 318 Codes included an empirical design equation for reinforced concrete deep beams. Since 2002, the strut and tie model and nonlinear analysis have been required. However, both methods have …
Page 1 of 4