Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 345 for “"Struts"”.
-
Mechanical property variation in metal lattice struts
… how design parameters impact individual lattice struts during manufacturing. To test individual lattice struts, tensile specimens with five struts interrupting the gauge section were manufactured in three strut diameters and two build orientations. Testing different strut diameters investigates …
-
Dipole radiation intensity generated by cylindrical struts
The purpose of this work is to further establish the viability of the Causality Correlation Technique as a diagnostic tool for treatment of noise problems. Acoustical dipole radiation can be generated by obstructing a subsonic flow with a rigid strut, if the strut exerts fluctuating forces on the …
-
Automatic Method for Testing Struts-Based Application
Model based testing is a very popular and widely used in industry and academia. There are many tools developed to support model based development and testing, however, the benefits of model based testing requires tools that can automate the testing process. The paper propose an automatic method for …
-
Novel interfaces in hybrid composite-metal struts
… solution, for applications to hybrid, tubular struts. The joint is initiated via the filament winding of carbon-fibre tows around features (pins) that are structured onto the surface of the metal.The interlocking between the fibre-tows and metal pins provides a joining mechanism that both, …
-
Parasitic noise from probes and struts in flows
When a fast-responding static pressure probe is inserted into a flow, there are several possible mechanisms for the generation of extraneous noise. If the probe signal is cross-correlated with the far field sound, then the "probe noise" may contribute a dominant fraction of the total correlatable …
-
A Test Suite Generator For Struts Based Applications
… cases used to test applications built on the Struts MVC framework for the J2EE platform. Using the Struts configuration files, test cases are generated to test each request path and response. The created test cases take advantage of the StrutsTestCase library and run using the JUnit and Cactus …
-
Effect of struts on aeroacoustics of axisymmetric supersonic inlets
… was the standard inlet design where the struts are located immediately upstream of the fan. The new configuration has the struts located 3.3 chord length upstream of the fan. The purpose for relocating the strut position was to reduce the flow distortion and radiated noise level. The …
-
Experimental investigation of unsteady fan flow interaction with downstream struts
… the locations of five large downstream support struts. In the present work, these data are thoroughly analysed. Strut-induced pressure amplitudes as measured on the rotor are presented as a function of the downstream strut locations. Unsteady lift and moment are calculated by integrating the …
-
Analytical and Experimental Study of Concentrically Braced Frames with Zipper Struts
This thesis investigates the performance of concentrically braced zipper frames through complementary experimental and numerical simulation approaches and proposes a design methodology for an innovative bracing scheme labeled as the suspended zipper frame. The suspended zipper frame intends to …
-
Structural Optimization of Struts in Lattices Fabricated with Laser Powder Bed Fusion
… adjusting their geometry. In this study, lattice struts were designed to optimize their structural performance. Since lattices tend to fail at the joints under tensile and compressive loads, these strut designs are wider at the ends than the center to provide reinforcement where it is most needed. …
-
Investigation of methods of delaying or controlling ventilation on surface piercing struts
… suction required to eliminate separation from struts of finite length in the presence of the free water surface. Suction and blowing in the amounts predicted were used to retard the inception of ventilation. The greatest success was achieved with a roughened model, which it is believed …
-
Vibration Isolation of a Horizontal Rigid Plate Supported by Pre-bent Struts
… of vibration isolator consisting of two pre-bent struts which are clamped at both ends and intermediately bonded with a viscoelastic filler. The proposed isolation device has the ability to support a relatively large static load with little deflection and offers a low axial resistance under …
-
Parametric Instability and Vibration Suppression of Planetary Gear Transmissions Supported on Boundary Struts
… flexible ring gear, and the discrete boundary struts, the effects of boundary strut properties on maximum ring stress, planet bearing force, and tooth mesh force vibrations are investigated over the operating speed range. The analysis shows that by properly tuning the boundary strut properties, …
-
Analysis of hydro-pneumatic interconnected suspension struts in the roll plane vehicle model
… chambers of the right- and left-compact struts, are realized for the analyses. The analytical models are solved to derive the static and dynamic properties of various unconnected and interconnected configurations in terms of vertical spring rate, effective vertical mode damping, effective …
-
Repair and Retrofit of Non-Ductile Reinforced Concrete Frames with Diagonal Steel Compression Struts
… sections, which are designed as compression struts to retrofit non-ductile reinforced concrete frames in an attempt to increase stiffness and lateral load capacity. The advantage is the elimination of costly and detailed connections necessary to exploit the tension capacity of the brace. Two, …
-
Behavior and design of concentrically loaded duplex stainless steel single equal-leg angle struts
Stainless steel has garnered attention as an alternative structural material to conventional carbon steel due to its corrosion resistance properties and aesthetic appearance. Of interest are single angles, which are frequently used in trusses, transmission towers, and as bracing diaphragms. When …
Page 1 of 18