Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"Struts (Engineering)"”.
-
Effect of struts on aeroacoustics of axisymmetric supersonic inlets
… was the standard inlet design where the struts are located immediately upstream of the fan. The new configuration has the struts located 3.3 chord length upstream of the fan. The purpose for relocating the strut position was to reduce the flow distortion and radiated noise level. The …
-
Design for shear in reinforced concrete using strut-and-tie and sectional models
… examined. Initially, the response of isolated struts was observed. Various layout of reinforcement were used within the isolated struts. Three series of deep beam tests were also conducted. The first series was used to examine the effects of load distribution (uniform or concentrated) and …
-
Strength evaluation of strut-purlins
Diaphragm braced strut-purlins are commonly used in the roof systems of metal buildings. However, the design problem of combined uplift and axial loads on these members is not adequately addressed in the 1989 AISI specification. The objective of this thesis is to provide experimental evidence that …
-
Experimental investigation of unsteady fan flow interaction with downstream struts
… the locations of five large downstream support struts. In the present work, these data are thoroughly analysed. Strut-induced pressure amplitudes as measured on the rotor are presented as a function of the downstream strut locations. Unsteady lift and moment are calculated by integrating the …
-
A study of single angle compression members
A study was undertaken to investigate the compressive capacity of a specific group of single angle members. A review of existing literature and techniques was presented. Laboratory compression tests were performed on 22 angle members of four different sizes and two different lengths. Additional …
-
Inelastic-buckling behavior of steel struts : hysteretic modeling and applications to nonlinear "Post-failure" analysis of space trusses
… Department of Civil and Environmental Engineering, 1988
-
Analytical and Experimental Study of Concentrically Braced Frames with Zipper Struts
This thesis investigates the performance of concentrically braced zipper frames through complementary experimental and numerical simulation approaches and proposes a design methodology for an innovative bracing scheme labeled as the suspended zipper frame. The suspended zipper frame intends to …